GA to Flexwing microlight
Spicy Meatball
Thread Starter
Join Date: Jan 2004
Location: Liverpool UK
Age: 41
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
GA to Flexwing microlight
After renewing my PPL and realising yet again, that the costs/currency are difficult to keep up with, plus the lack of victims to take, I've decided to get into flex-wing flying!
I live a few miles from Ince Blundell and will be giving them a call soon, but thought I would consult you lot first, as I haven’t done so for quite some time.
I believe I can fly a microlight on my current PPL(a) with some differences training (I’m current at the moment) so that’s the first port of call. The ultimate goal is to buy my own microlight (supposed I have to like the idea of flying one first). I suppose the main attraction, apart from the lower costs is the ‘air in your face’ flying and the ability to get in and out of small fields etc – more laid back approach to flying and slower stall speed etc. I’ve looked at some performance figures and they are astonishing. I’d also relish the opportunity to own and maintain my own aircraft, with more flexibility as to where and when I can fly it.
My main questions to you are:
1) Best place to buy a flex-wing microlight, and a good model for a not so small person (haven’t decided on a 1 or 2 seater yet)
2) What kind of costs I can expect
3) Any good stories/experiences you’d like to share!
Think that’s it for now – I’ll probably visit IB on the weekend if this white stuff clears up!
Cheers
Maz
I live a few miles from Ince Blundell and will be giving them a call soon, but thought I would consult you lot first, as I haven’t done so for quite some time.
I believe I can fly a microlight on my current PPL(a) with some differences training (I’m current at the moment) so that’s the first port of call. The ultimate goal is to buy my own microlight (supposed I have to like the idea of flying one first). I suppose the main attraction, apart from the lower costs is the ‘air in your face’ flying and the ability to get in and out of small fields etc – more laid back approach to flying and slower stall speed etc. I’ve looked at some performance figures and they are astonishing. I’d also relish the opportunity to own and maintain my own aircraft, with more flexibility as to where and when I can fly it.
My main questions to you are:
1) Best place to buy a flex-wing microlight, and a good model for a not so small person (haven’t decided on a 1 or 2 seater yet)
2) What kind of costs I can expect
3) Any good stories/experiences you’d like to share!
Think that’s it for now – I’ll probably visit IB on the weekend if this white stuff clears up!
Cheers
Maz
Join Date: Feb 2008
Location: London nr EGKB
Age: 32
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Not a very helpful reply (sorry)
I would be interested to see what comes of this though I am currently training for my PPL (a) but am also wanting to fly Flexwing. I understood it that you could not use hours that you fly (Microlight) can not count towards to your PPL currency hours?
Tom
I would be interested to see what comes of this though I am currently training for my PPL (a) but am also wanting to fly Flexwing. I understood it that you could not use hours that you fly (Microlight) can not count towards to your PPL currency hours?
Tom
Join Date: Sep 2005
Location: Norfolk UK
Age: 80
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mazzy,happy new year!
I think flexwing/microlight do not count toward a ppl although you may be able to transfer some hours.
Mazzy is asking the opposite,he has a ppl but wants to fly flexwing.
Lister
edited to add,I think there are courses to convert ppl to nppl(m)
Mazzy is asking the opposite,he has a ppl but wants to fly flexwing.
Lister
edited to add,I think there are courses to convert ppl to nppl(m)
Join Date: Dec 2005
Location: Ireland
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Ince is a great place to Learn, Say Hi to Karl for me.
Great Club, very friendly and a lovely grass airfield with 3 runways, I call in when I do some of the trips across the UK from Ireland.
RE: Type of Flex to buy; all depends on your circumstances, what you want to do, how much you want to spend... They range from £2500 up to £45000 and everywhere in between. Best thing to do is to take a trip with the fellas at Ince and ask questions of all the lads flying there. There is now Rotax 912 powered aircraft for 10K upwards. see Aircraft for sale for some of the planes for sale.
The instructors at Ince can give you the low down on what you have to do regarding licensing... talk to them about it.
Good experiences....... Sure there is, you will have one hell of a grin when you fly a flex, a motorbike of the skies !
Asking questions on www.MicrolightForum.com will probably result in more knowledgeable responses as it is a dedicated microlight forum... actually quite a few of the Ince Pilots on that particular forum.
Good luck with it and let us know how you get on.
Jon
Great Club, very friendly and a lovely grass airfield with 3 runways, I call in when I do some of the trips across the UK from Ireland.
RE: Type of Flex to buy; all depends on your circumstances, what you want to do, how much you want to spend... They range from £2500 up to £45000 and everywhere in between. Best thing to do is to take a trip with the fellas at Ince and ask questions of all the lads flying there. There is now Rotax 912 powered aircraft for 10K upwards. see Aircraft for sale for some of the planes for sale.
The instructors at Ince can give you the low down on what you have to do regarding licensing... talk to them about it.
Good experiences....... Sure there is, you will have one hell of a grin when you fly a flex, a motorbike of the skies !
Asking questions on www.MicrolightForum.com will probably result in more knowledgeable responses as it is a dedicated microlight forum... actually quite a few of the Ince Pilots on that particular forum.
Good luck with it and let us know how you get on.
Jon
After renewing my PPL and realising yet again, that the costs/currency are difficult to keep up with, plus the lack of victims to take, I've decided to get into flex-wing flying!
I live a few miles from Ince Blundell and will be giving them a call soon, but thought I would consult you lot first, as I haven’t done so for quite some time.
I believe I can fly a microlight on my current PPL(a) with some differences training (I’m current at the moment)
I live a few miles from Ince Blundell and will be giving them a call soon, but thought I would consult you lot first, as I haven’t done so for quite some time.
I believe I can fly a microlight on my current PPL(a) with some differences training (I’m current at the moment)
so that’s the first port of call. The ultimate goal is to buy my own microlight (supposed I have to like the idea of flying one first). I suppose the main attraction, apart from the lower costs is the ‘air in your face’ flying and the ability to get in and out of small fields etc – more laid back approach to flying and slower stall speed etc.
I’ve looked at some performance figures and they are astonishing. I’d also relish the opportunity to own and maintain my own aircraft, with more flexibility as to where and when I can fly it.
My main questions to you are:
1) Best place to buy a flex-wing microlight, and a good model for a not so small person (haven’t decided on a 1 or 2 seater yet)
1) Best place to buy a flex-wing microlight, and a good model for a not so small person (haven’t decided on a 1 or 2 seater yet)
Join the BMAA now - you'll need to, and for a start the back of Microlight Flying magazine is an excellent source of second hand aeroplanes. The other good source of second hand aeroplanes is AFORS, the well known website
There are few poor aeroplanes in the UK market, but in general if you go for anything with a current permit, built by Pegasus, Mainair, P&M Aviation, or Medway Microlights (and not fitted with a flash 2 or flash 2 alpha wing), and using a Rotax engine, you're unlikely to regret it. For performance, seat limits, typical empty weight and MTOW - go to the BMAA website and download the TADS for any type, which are under "tech talk". Also this book acts as a reasonable buyers guide.
4-stroke engines are more reliable and economical than older 2-stroke engines, but also heavier and more work to maintain yourself. I'd steer clear of the 532 and 508 engines which are a bit long in the tooth now, or the 447 if you'll be carrying passengers. The 503-2V is a good small 2-stroke, the 582 a good larger 2-stroke (if a little more complex due to the liquid cooling), and the 912 a stunningly good 4-stroke.
Inevitably, the newer more sophisticated aeroplanes will cost more, but you can still get a good 2-seater for £3k+ and a very good one for £10k.
2) What kind of costs I can expect
Hangerage is whatever you end up paying; I pay £25/month plus £50pa club membership on a farmstrip, but that's on the low end, most places you'll be paying 2-3 times that.
3) Any good stories/experiences you’d like to share!
Very best of luck, and you won't regret it.
Do get a BMAA inspector to go over any aeroplane before you buy it. The odds are that your instructor can do that for you.
G
Join Date: Jan 2007
Location: Pembrokeshire UK
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
I have only flown in(on!) a flexwing once, and it was a genuinely fantastic experience. The visibility is superb, and the feeling of being directly connected to the aeroplane and the air supporting it was unique. But 50 years of ingrained flying instinct cannot be instantly changed. The controls of a flexwing are completely opposite to a conventional aeroplane, and I found it nearly impossible to maintain control for more than a minute or two. It felt like trying to ride a bicycle with legs and arms crossed.
I really don't want to seem like a spoil sport, but please be aware of what can happen in an emergency when ingrained instinct kicks in.
There are a number of fatal accidents that have occured, when following an otherwise survivable incident the pilot moved the controls in exactly the wrong way, thus causing a dive into the ground or a steep turn and spin.
Admittedly these occured when a flexwing trained pilot converted to a conventional spam-can. But presumably the same scenario is possible going the other way. Like I say am not trying to spoil the fun, but please be aware of instinctive reactions that could kill you.
I really don't want to seem like a spoil sport, but please be aware of what can happen in an emergency when ingrained instinct kicks in.
There are a number of fatal accidents that have occured, when following an otherwise survivable incident the pilot moved the controls in exactly the wrong way, thus causing a dive into the ground or a steep turn and spin.
Admittedly these occured when a flexwing trained pilot converted to a conventional spam-can. But presumably the same scenario is possible going the other way. Like I say am not trying to spoil the fun, but please be aware of instinctive reactions that could kill you.
Join Date: May 2006
Location: Down South, preferably inverted
Posts: 235
Received 0 Likes
on
0 Posts
The controls of a flexwing are completely opposite to a conventional aeroplane, and I found it nearly impossible to maintain control for more than a minute or two. It felt like trying to ride a bicycle with legs and arms crossed.
As I understand it... A weightshift microlight (Big flying kite with a pod underneath and open to the elements!) will be opposite control movement to spam can flying. i.e. push the bar forwards for take off.
I believe that the term "flex wing" microlight refers to the newer microlights i.e. C42. Two seater lightweight baby aeroplane but closed cockpit and cabin HEATERS.
I'm willing to be educated if someone else understands where these terms come from and i have it wrong?
PS - My partner fly's a weightshift microlight, and I've had a trial lesson in one once. The only problem I had was taxying on the ground. Everything else felt "right" for the type of aircraft.
I've also had a go in a C42 - central stick between the two seats, throttle between your legs () - but all controls were in the correct sense for this spam can flier.
Join Date: Dec 2005
Location: Ireland
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
"Flex-Wing" in general lay man's terms refer to Weightshift microlights, or as you refer to them "A Kite"... so IMHO the original poster is correct.... A C42 is not a Flex Wing... it is a conventional 3 axis aircraft, just like a "Spam can"....the fact it has a cabin heater is irreverent !
Join Date: Jan 2002
Location: Aberdeen
Posts: 1,234
Likes: 0
Received 0 Likes
on
0 Posts
I'm with Madgirl, I've close on 1000hrs of 'conventional' flying and actually found weightshiffts fairly straight forward to fly.
The 'trick' is much like left and right hand, stick and yoke - get the right mental picture and it just slots in. But on the ground I did have to think!
So I do not believe it is that difficult to 'convert'. The trick is to find the right mental picture, in my case to 'fly the wing', knowing that it is about angle of attack and roll not about stick or yoke movements.
And it is great fun - although turbulence is hard work!
The 'trick' is much like left and right hand, stick and yoke - get the right mental picture and it just slots in. But on the ground I did have to think!
So I do not believe it is that difficult to 'convert'. The trick is to find the right mental picture, in my case to 'fly the wing', knowing that it is about angle of attack and roll not about stick or yoke movements.
And it is great fun - although turbulence is hard work!
A solution to the winter flexwing / weightshift problem is to go and spend some money in a motorcycle shop, who usually sell electrically heated clothing that can fairly readily be matched up to the aircraft's 12V power supply.
G
G
Hi Maz, I fly a flex from Ince its an older Mainair F2a powered by a Rotax 503 duel ignition 2 stroke, slow compared to the modern flex that can top 100mph, my cruise speed is 55mph burning 10lts of unleaded solo 15lts 2 up, I keep it at home in the garage on its trailer and obviously have to rig it each time I fly which can be restricting as it take over an hour to assemble but its not something that bothers me but it does most owners who like to leave them part rigged at the airfield,
I did have some GA experience also from Liverpool like you but would not swap my flexwing for the world, I just love the type of flying and the very friendly club environment which is so important and thriving at Ince a cracking bunch of guys,
I do all my own maintenance and almost enjoy that as much as the flying,
I have a very amateurish video on youtube if you care to take a look filmed at Ince with a very basic camera,
YouTube - Mainair F2a flexwing microlight flight to the Pier Head.
They have 2 very modern flexwings at Ince to train on and hire as well if you would prefer, the Mainair GT 450 912,
Give me a shout if I can help any.
Nick.
I did have some GA experience also from Liverpool like you but would not swap my flexwing for the world, I just love the type of flying and the very friendly club environment which is so important and thriving at Ince a cracking bunch of guys,
I do all my own maintenance and almost enjoy that as much as the flying,
I have a very amateurish video on youtube if you care to take a look filmed at Ince with a very basic camera,
YouTube - Mainair F2a flexwing microlight flight to the Pier Head.
They have 2 very modern flexwings at Ince to train on and hire as well if you would prefer, the Mainair GT 450 912,
Give me a shout if I can help any.
Nick.
Last edited by magpienja; 6th Jan 2010 at 21:34.
Spicy Meatball
Thread Starter
Join Date: Jan 2004
Location: Liverpool UK
Age: 41
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the great replies....
I have to admit (with regarding the difficulty in converting from fixed wing) that I have thought about exactly the same issue - it doesn't worry me, but I am well aware of it. The good thing is that Ince have a flight simulator, rigged up to conventional flexwing controls - so a few hours on this should help (alongside airtime)! If I'm honest, it excites me having to learn something new.
Here's a bit of a perhaps arrogant question - do you think there is a relationship between cost and safety? I don't want to buy an all singing and dancing aircraft - three wheels and and a seat would do me - to increase the feeling of being at one with the aircraft. If I could buy one for anything up to 5k, I'd be made up, but just want your opinion on this ...
Next stage for me is to get in touch with Ince and take I from there - and for those that know my regular style of posting, I will be sure to let you know how I get on
Thanks again
Maz
I have to admit (with regarding the difficulty in converting from fixed wing) that I have thought about exactly the same issue - it doesn't worry me, but I am well aware of it. The good thing is that Ince have a flight simulator, rigged up to conventional flexwing controls - so a few hours on this should help (alongside airtime)! If I'm honest, it excites me having to learn something new.
Here's a bit of a perhaps arrogant question - do you think there is a relationship between cost and safety? I don't want to buy an all singing and dancing aircraft - three wheels and and a seat would do me - to increase the feeling of being at one with the aircraft. If I could buy one for anything up to 5k, I'd be made up, but just want your opinion on this ...
Next stage for me is to get in touch with Ince and take I from there - and for those that know my regular style of posting, I will be sure to let you know how I get on
Thanks again
Maz
Mazzy
Licensing wise for what it's worth I believe that you can now have a NPPL with SSEA and M ratings (and SLMG if you so desire) and all time counts for all types for renewal - you just have to get an hour minimum on type.
Might help you keep your options open.
Licensing wise for what it's worth I believe that you can now have a NPPL with SSEA and M ratings (and SLMG if you so desire) and all time counts for all types for renewal - you just have to get an hour minimum on type.
Might help you keep your options open.
.....go and spend some money in a motorcycle shop.....
"It's fun to fly with the Bee Emm Ay Ay.....!!"
Seriously though:
1. You may fly a Microlight on a JAR-FCL PPL SEP Class Rating after having received 'differences training' from a Microlight instructor, but you do not need any new Class Rating. Hours flown on a Microlight will NOT count towards any JAR-FCL revalidation.
2. An NPPL can indeed include Microlight, SLMG and SSEA Class Ratings. Hours flown on any Class will count towards revalidation of all Class Ratings included in an NPPL, although there is a minimum time requirement for each Class. See AIC 30/2008 for full details.
3. If you intend to fly a Microlight in the UK, join the BMAA.
G
(N.B. BEagle - not sure if you're suggesting that's any kind of problem? Seems fine to me?)
Spicy Meatball
Thread Starter
Join Date: Jan 2004
Location: Liverpool UK
Age: 41
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
Beagle - excellent!
From what I gather so far, it looks like I'll be maintaining an NPPL and 'downgrading' my JAR? Quite happy to do that and give up flying Traumahwaks out of Liverpool.
I'm hopefully visiting IB on Sunday (they do hire ) so I'll be able to get a better picture then.
I've been looking at the classified section on the BMAA website - some nice looking aircraft going there quite cheap (I'm using the word 'cheap' as I've only ever really dribbled over fixed wing ad's) - I'll have to get some knowledge on the aircraft and their maintenance before I go in head first, obviously. I'm interested to know more about permit rules, how easily they are obtained and aircraft maintenance etc.
Sunday should be a very enlightening day
Mag - excellent video, some very recognisable scenery for me there - I've done most of my flying in those areas...
From what I gather so far, it looks like I'll be maintaining an NPPL and 'downgrading' my JAR? Quite happy to do that and give up flying Traumahwaks out of Liverpool.
I'm hopefully visiting IB on Sunday (they do hire ) so I'll be able to get a better picture then.
I've been looking at the classified section on the BMAA website - some nice looking aircraft going there quite cheap (I'm using the word 'cheap' as I've only ever really dribbled over fixed wing ad's) - I'll have to get some knowledge on the aircraft and their maintenance before I go in head first, obviously. I'm interested to know more about permit rules, how easily they are obtained and aircraft maintenance etc.
Sunday should be a very enlightening day
Mag - excellent video, some very recognisable scenery for me there - I've done most of my flying in those areas...
Join Date: Sep 2007
Location: UK
Age: 46
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Here's a bit of a perhaps arrogant question - do you think there is a relationship between cost and safety? I don't want to buy an all singing and dancing aircraft - three wheels and and a seat would do me - to increase the feeling of being at one with the aircraft. If I could buy one for anything up to 5k, I'd be made up, but just want your opinion on this ...
Single seaters are a bit different as they have (nearly) all been deregulated (SSDR) in the last couple of years. The new SSDR are probably all fine (eg. P&Ms Laser, or Flylight's Dragonfly). There is no official permit system though, and it is up to you to decide whether you are happy it is safe. Second hand older single seaters (eg. the Chaser) may be great, or could be an unmaintained pile of junk that someone has decided they can sell now it doesn't need a permit! Worth taking someone who knows the type along to have a look with you.
You asked about permits and maintenance. The deregulated single seaters do not need a permit at all. Provided you have a valid licence/medical/insurance and you can get it off the ground you can fly it. 2-seaters and single seaters which don't meet the criteria for SSDR need a permit. Once a year the plane + logbook needs inspecting by a BMAA inspector and test flying (cost between you and the inspector - maybe 100GBP), and the paperwork sending off to the BMAA for about another 100GBP to get the permit. You'll also need to be a BMAA member for this (about 60/year, including the monthly magazine). You can normally do all maintenance yourself, with the exception of a factory wing strip every few hundred hours.