Go Back  PPRuNe Forums > Ground & Other Ops Forums > ATC Issues
Reload this Page >

What are your pet hate non-standard phraseologies?

Wikiposts
Search
ATC Issues A place where pilots may enter the 'lions den' that is Air Traffic Control in complete safety and find out the answers to all those obscure topics which you always wanted to know the answer to but were afraid to ask.

What are your pet hate non-standard phraseologies?

Thread Tools
 
Search this Thread
 
Old 17th Mar 2008, 21:45
  #101 (permalink)  
 
Join Date: Sep 2003
Location: SE England
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Tower to a/c on first contact (inbound) : 'ABC123 continue approach"

Tower to a/c taxing to hold, after being cleared to hold by ground: "ABC123 continue to the hold" !!!

Talk about tits on a bull!!!!!!!!!!!
In the first instance it implies that you're not cleared to land so it's very useful! Unless you'd prefer "go around I say again go around acknowledge" instead?
Van Der Hum is offline  
Old 17th Mar 2008, 21:52
  #102 (permalink)  
DFC
 
Join Date: Mar 2002
Location: Euroland
Posts: 2,814
Likes: 0
Received 0 Likes on 0 Posts
LIKLIK

I can't copy the ref. for this but CAP493 appendix E p9 specifies:-

Pilot readback of RTF messages
SSR operating instructions

Controllers are to prompt a pilot if a readback is not immediately forthcoming


Also in CAP 413 RT Manual (for pilots and ATC)
Thankfully we never hear " If you read this transmission squawk ident" then

However, Both the ICAO R/T manual and the local UK CAP 413 require either a readback or an acknowledgement of an instruction to squawk ident.

Regards,

DFC
DFC is offline  
Old 17th Mar 2008, 21:53
  #103 (permalink)  
 
Join Date: Jul 1999
Location: 58-33N. 00-18W. Peterborough UK
Posts: 3,040
Likes: 0
Received 0 Likes on 0 Posts
This is all getting quite worrying
forget is offline  
Old 17th Mar 2008, 23:17
  #104 (permalink)  
 
Join Date: Mar 2008
Location: In Denial
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
same old same old, long time reader... etc. But I just HAD to add my two cents to this thread...

I'm surprised it hasn't been posted already but...
ATC: "ABC123 standby"
ABC123: "Copied, we'll stand by"

In frustration with one particular repeat offender I added
"ABC123 standby, I'll call you back"
to which he responds quite casually
"Okay, copied. We'll standby and wait for your call shortly..."
Skyjuggler is offline  
Old 18th Mar 2008, 06:45
  #105 (permalink)  
 
Join Date: Apr 2002
Location: world citizen
Posts: 146
Likes: 0
Received 0 Likes on 0 Posts
In frustration with one particular repeat offender I added
"ABC123 standby, I'll call you back"
to which he responds quite casually
"Okay, copied. We'll standby and wait for your call shortly..."
'

Boy u must be busy! I present you this tool: "ABC123 standby, BREAK, ABC234 cleared whatever...."
Short Approach? is offline  
Old 18th Mar 2008, 07:40
  #106 (permalink)  
PPRuNe supporter
 
Join Date: Dec 2003
Location: Planet Earth
Posts: 1,677
Likes: 0
Received 0 Likes on 0 Posts
I have to say, the majority of RT 'hates' posted on here don't bother me in the slightest, however, after giving tfc info, 'Got him on TCAS' does irritate as there is nothing ATC can do with that info. If you are not visual, it doesn't count. I am sure there is plenty that we do that irritate pilots too. A lot of it is down to not understanding why it HAS to be said and that applies to both sides.
Have to agree, as I see it every region seems to develop their own brand of phraseology, I remember as an ex-air traffic controller (US), my check pilot in the UK hammering me on my poor phraseology, he was dead on and I will always remember Mike at Caledonian. It seems to me that many of the worst habits seem to develop from Asia, like:

Approaching level....

We have him on TCAS...

Charlie, charlie...

Fully ready...

If available...

Bye...Germany?

Blocked...USA

Track shortening...HKG

Pass your message?? UK

On the good side, US pilots DO make turbulence reports, in Asia, such reports nonexistent.
Dream Land is offline  
Old 18th Mar 2008, 08:02
  #107 (permalink)  
 
Join Date: Dec 2006
Location: Over Graz
Posts: 164
Likes: 0
Received 0 Likes on 0 Posts
Foghorn, we hear a lot of these "blocked" things in India and in the Middle East, where pilots change frequencies, press the mike, and fire the message. No listening or regard for whoever might be talking to the controller at that moment.
Thylakoid is offline  
Old 18th Mar 2008, 10:45
  #108 (permalink)  
 
Join Date: Aug 2001
Location: UK
Posts: 102
Likes: 0
Received 0 Likes on 0 Posts
Geeez. What a depressing thread. Seems that no matter who I talk to, I will be upsetting someone. Guess CPDLC for all will solve the problem!!
refplus20 is offline  
Old 18th Mar 2008, 13:28
  #109 (permalink)  
 
Join Date: Oct 2002
Location: Silicon Hills
Posts: 234
Likes: 0
Received 0 Likes on 0 Posts
I dunno, I think a bunch of you folks would go absolutely nutty listening to a typical weekend's chatter in the States. Standard phraseology, Whazzat???

"We have 'em on TCAS/Fishfinder" etc. -- Useless, please look away from the screen and out the window, let me know when you SEE the traffic.

Lately, every other turbine aircraft seems to need to tell me they will be ready at the end when they're still a half mile from the end on the taxiway. No kidding, you got both engines running?

When changing freqs, LISTEN 15 seconds, then speak if appropriate.

If you hear me say "Nxxx, #4 standby", now is NOT a good time to ask for a shortcut. Your wish is suddenly on the very bottom of my "to do" list;
in very small print

vector4fun is offline  
Old 18th Mar 2008, 19:04
  #110 (permalink)  
 
Join Date: Apr 2000
Location: 30 West
Age: 65
Posts: 926
Likes: 0
Received 0 Likes on 0 Posts
And another one...........

Inbound MAN, Shannon says - descend now, be level FL270, 10 miles before LIFFY.

Has the already low block standing agreement changed again ?

We will be level at LIFFY, we do not wish to squander another 200kgs of fuel being level 10 miles before LIFFY thankyou
javelin is offline  
Old 18th Mar 2008, 19:32
  #111 (permalink)  
 
Join Date: Mar 2006
Location: Swanwick
Age: 42
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
thats a dangerous game to be playing javelin...

what if the level restriction is for seperation?? what if the shannon controller has another aircraft behind/in front that relies on that 10 miles before liffey?? Level restrictions aren't given just to piss you pilots off... they are given for a reason, normally a very good one!! someday you're attitude to them may bite you in the proverbial a**...
Medway Control is offline  
Old 18th Mar 2008, 21:55
  #112 (permalink)  
 
Join Date: Nov 2007
Location: Polymer Records
Posts: 597
Likes: 0
Received 0 Likes on 0 Posts
"Morning Ground, Callsign, B737, Stand x, information y, QNH, request clearance"

"Cleared to etc. information y, QNH"

"Cleared to, information y, QNH"

20 seconds later

"Callsign, request push and start""

"Callsign, say again stand number"

"Callsign, stand x"

"Callsign, push and start approved, information y, QNH"

"Callsign, push and start approved, information y, QNH"

I guess its all standard but just how many times do we need to tell ATC that we have the ATIS and QNH? The words Polly and Parrot sometimes comes to mind!
Artie Fufkin is offline  
Old 18th Mar 2008, 22:08
  #113 (permalink)  
 
Join Date: Sep 1999
Location: Scotland
Posts: 417
Likes: 0
Received 0 Likes on 0 Posts
Javelin that is an absolutely disgraceful attitude which is an admission of a direct compromise of flight safety on your part.

I would like to re-assure controllers that such scoffing at a clear ATC instruction with intended non-compliance is extremely rare in my experience.
Kiltie is offline  
Old 18th Mar 2008, 22:28
  #114 (permalink)  
I REALLY SHOULDN'T BE HERE
 
Join Date: Dec 2005
Location: TOD
Posts: 2,098
Received 96 Likes on 33 Posts
Me: " AAA Control, ABC123 FL120 H220 degrees"

ATC: "ABC123 good morning, turn right ten degrees, report new heading"

Errr what's that all about, does it just slip out due to habit or is it some kind of SOP?
speedrestriction is online now  
Old 19th Mar 2008, 10:02
  #115 (permalink)  
 
Join Date: Aug 2000
Location: Scotland
Posts: 240
Likes: 0
Received 0 Likes on 0 Posts
Artie Fufkin wrote:

I guess its all standard but just how many times do we need to tell ATC that we have the ATIS and QNH? The words Polly and Parrot sometimes comes to mind!
Turning that on its head....

Very recently, aircraft called for clearance, acknowledged the current ATIS gave me the correct QNH which I noted. When the crew later called for taxy, (no change in either runway or QNH) I said "Taxy to Holding Point XX" reply was "Taxy to Holding Point XX, errr err err Runway YY, QNH zzzz" - Reading back things not said!



DD
Data Dad is offline  
Old 19th Mar 2008, 11:10
  #116 (permalink)  
Thread Starter
 
Join Date: Aug 2000
Location: Egcc
Posts: 1,695
Likes: 0
Received 0 Likes on 0 Posts
Let's not forget that standard phraseology for an ATCer is just that. For a pilot standard phraseology changes depending on where in the world he happens to be! I am all for as standard as possible, but we do hear variances even at different UK airfields, let alone what we hear once we have left these hallowed shores. Just a point in our defence!

PP
Pilot Pete is offline  
Old 19th Mar 2008, 12:35
  #117 (permalink)  
 
Join Date: Sep 2007
Location: Brisbane
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
Visual on top

To issue a VSA I need to hear "visual" as in "can maintain continuous visual reference to the ground or water etc..." "Visual on top" is so frustrating - can't give you anything based on that cobber!

But USA military pilots definitely get my vote for bizarre RT:

"Comin' at ya, abeam the numbers, good gear, goin' nowhere" (Southern drawl)

Heard it 14 years ago on my first TWR rating, can still hear it plain as anything. For a minute there, I wasn't even sure it was English, then my supervisor managed to stop laughing long enough to say "base, 3 greens, full stop". Guess I haven't watched Top Gun enough.....
RAAFASA is offline  
Old 19th Mar 2008, 15:06
  #118 (permalink)  
DFC
 
Join Date: Mar 2002
Location: Euroland
Posts: 2,814
Likes: 0
Received 0 Likes on 0 Posts
And another one...........

Inbound MAN, Shannon says - descend now, be level FL270, 10 miles before LIFFY.

Has the already low block standing agreement changed again ?

We will be level at LIFFY, we do not wish to squander another 200kgs of fuel being level 10 miles before LIFFY thankyou
and the Shannon controller sees that you are unable to comply with the clearance by reaching the level 10 miles late so the next day they tell you to be level 20 miles before liffy.

How much fuel does that cost?

Can't believe that someone would not comply with a clearance without telling ATC first.

Regards,

DFC
DFC is offline  
Old 19th Mar 2008, 16:08
  #119 (permalink)  
 
Join Date: Jun 2001
Location: UK
Posts: 3,982
Likes: 0
Received 1 Like on 1 Post
Also surely level by clearances are a limit and not a target!
fireflybob is offline  
Old 19th Mar 2008, 16:14
  #120 (permalink)  
 
Join Date: Apr 2000
Location: 30 West
Age: 65
Posts: 926
Likes: 0
Received 0 Likes on 0 Posts
I thought I would wait a while........ I asked the fine gent in Shannon why 10 before. He said that sometimes aeroplanes didn't make the restriction and he prefered to hand traffic to MAN level. The remark about the BSA is my question, not a reply on air.

I agree, we sometimes get early descent to avoid conflict, but usually we have already spotted this on TCAS and also by being observant as to who is who coming off the ocean. In this case, I normally offer a level change to help.

While the BSA's work in reducing holding at destination, all I ask is for some consistency. If it's 10 before, publish it, let's not make it a restriction on the whim of a controller

Out of work, I sit on an airspace group to help coordinate ATC and GA aircraft. I also do Fam Flights for ATC so really, I do my bit to help !
javelin is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.