AF 447 Search to resume
Originally Posted by damirc
Interesting...
I find it rather interesting to notice, that the wreckage is generally spread east-west/west-east (flighpath should've been NNE). Unxpected.
(in reference to http://www.bea.aero/fr/enquetes/vol....sn109a700m.jpg)
I find it rather interesting to notice, that the wreckage is generally spread east-west/west-east (flighpath should've been NNE). Unxpected.
(in reference to http://www.bea.aero/fr/enquetes/vol....sn109a700m.jpg)
1. Aircraft was most likely not in controlled flight (more likely stalled). Had the stall been a simple "nose falls stall" it would a) have been more recoverable and b) likely been arrested before impact with the sea during the five mile plummet.
2. An upset/stall is likely to develop a rotational feature. The more the aircraft rotates, or has a post stall gyration, the less likely "initial heading" can be preserved during X rotations from 30,000+ feet to 0 feet.
3. Debris field has been subject to various oceanic influence, which were not necessarily aligned with the direction of flight. Unlike a crash that hits the ground, final resting place of this aircraft after impact will move ... in this case, due to both wind and water mass movements.
Put another way, I'd be stunned if the debris field were to have coincided with the selected course (NNE) that was to take the flight to Paris. Had they been able to maintain course/heading, I doubt they'd have crashed at all.
Join Date: Jan 2008
Location: Slovenia
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
1. Aircraft was most likely not in controlled flight (more likely stalled). Had the stall been a simple "nose falls stall" it would a) have been more recoverable and b) likely been arrested before impact with the sea during the five mile plummet.
3. Debris field has been subject to various oceanic influence, which were not necessarily aligned with the direction of flight. Unlike a crash that hits the ground, final resting place of this aircraft after impact will move ... in this case, due to both wind and water mass movements.
Put another way, I'd be stunned if the debris field were to have coincided with the selected course (NNE) that was to take the flight to Paris. Had they been able to maintain course/heading, I doubt they'd have crashed at all.
D.
Join Date: Oct 2008
Location: Under the Long Grey Cloud
Age: 75
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Looking closely at one of the tyres one can see that it has been ruptured near the rim. I assume it has returned to its uninflated shape..but is full of water at ambient (4000m) pressure.
Join Date: Mar 2001
Location: us
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Machaca, in the overlay to mm43's graphic, the location is probably to the west of the arrow tip. mm43 carefully drew the first day's aerial search grid (the yellow box) along the flight path, and unless the Brazilians were blind, the location is probably several kilometers to the west of that first search grid.
As has been discussed for many months, the subsequent searches in the several days following were to the right of that yellow box (i.e., to the east) along the flight path.
From an academic standpoint, it will be interesting to learn the reasons for the current and drift reconstructions having been off.
As has been discussed for many months, the subsequent searches in the several days following were to the right of that yellow box (i.e., to the east) along the flight path.
From an academic standpoint, it will be interesting to learn the reasons for the current and drift reconstructions having been off.
Last edited by SaturnV; 4th Apr 2011 at 20:05.
Join Date: Jul 2009
Location: USA
Age: 61
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Interesting that the drift was not as chaotic as thought. Compare MM43's map at post 911 of this thread and this link below. Looking at the phase three search area it is a shame that they took a "bite out of the sandwich" in the search area. Understandable based on duration of flight from LKP, track deviation, etc. I guess the lesson is start at LKP and head out despite how smart we all think we are.
http://www.bea.aero/en/enquetes/flig...hes.en.mer.pdf
http://www.bea.aero/en/enquetes/flig...hes.en.mer.pdf
Join Date: Jun 2009
Location: Colorado
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
i would epect the tires to only lose their air when pressure was great enough to break the rubber seal with the rims, but not explode from the pressure.
I haven't read the BEA report but from what we've seen so far we can determne that:
- it was a relatively low speed impact (somewhere less than supersonic) with the ocean surface as the airframe wasn't broken into tiny bits
- if all sunken major airframe parts are recovered in that small area then those airframe parts were likely connected at impact rather than seperating at altitude,
- the fuselage was opened at some point (upon impact I expect) because the previously recovered galley came from within the cabin,
- we don't know how long it took sea creatures to consume those lost in the Titanic because searchers got there so many years later.
Glad to see they found it
I haven't read the BEA report but from what we've seen so far we can determne that:
- it was a relatively low speed impact (somewhere less than supersonic) with the ocean surface as the airframe wasn't broken into tiny bits
- if all sunken major airframe parts are recovered in that small area then those airframe parts were likely connected at impact rather than seperating at altitude,
- the fuselage was opened at some point (upon impact I expect) because the previously recovered galley came from within the cabin,
- we don't know how long it took sea creatures to consume those lost in the Titanic because searchers got there so many years later.
Glad to see they found it
Join Date: May 2004
Location: Canada
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Bodies found in wreckage
Join Date: May 2010
Location: Málaga, Spain
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Is it just me, or does it look like the engine in the picture had not been turning at the moment of impact. If it had, you would expect fractured or bent blades all around, not just on one side, wouldn't you? Could suggest they suffered a flame out.
The missing blades presumably would have been around 6 o'clock position and were ripped away on impact, but since the engine wasn't turning, the blades that were closer to the 12 o'clock position were preserved. Sound plausible? Or am I thinking too much of props?
The missing blades presumably would have been around 6 o'clock position and were ripped away on impact, but since the engine wasn't turning, the blades that were closer to the 12 o'clock position were preserved. Sound plausible? Or am I thinking too much of props?
Join Date: Jun 2009
Location: Bedford, UK
Age: 69
Posts: 1,321
Likes: 0
Received 0 Likes
on
0 Posts
wreckage location
Won't the location of the debris become very obvious once the recovery vessels turn up ? Before then, what is the risk beyond a boat load of photographers ?
Join Date: Mar 2001
Location: us
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Mr. Optimistic, it may be that France and/or Brazil need to establish a maritime security zone. and are working on the boundaries and procedures for doing so. If such a security zone is established, the national government(s) would be able to keep unwanted vessels and aircraft away.
Join Date: Jan 2008
Location: Australia - South of where I'd like to be !
Age: 58
Posts: 4,261
Likes: 0
Received 0 Likes
on
0 Posts
Do you really want a load of paparazi taking photos of an open hold with bodies inside it or the potential of a body being able to be seen via a window ?
After all, they would publish it if they got the photo.
I would like to see a Maritime exclusion zone around it.
.
After all, they would publish it if they got the photo.
I would like to see a Maritime exclusion zone around it.
.
Join Date: Jun 2009
Location: NNW of Antipodes
Age: 80
Posts: 1,330
Likes: 0
Received 0 Likes
on
0 Posts
Though the BEA have chosen to keep the exact location of the debris field secret, my best estimate would be that its about 335°T x 6.5NM from LKP. This is based solely on where I suspect the "Alucia" was working, i.e. she had completed the keyhole section in the rugged terrain to the NW and was working in an unfinished section to the south. I could also be totally wrong.
Yellow circle radii are multiples of 10NM from Last Known Position.
Yellow circle radii are multiples of 10NM from Last Known Position.
Join Date: Jun 2009
Location: NNW of Antipodes
Age: 80
Posts: 1,330
Likes: 0
Received 0 Likes
on
0 Posts
Though I remember questioning the relevance of an item of debris located close to where the debris field is believed to be, I consequently dismissed the recorded location as being a transcription error where a handwritten 3,66 was later transcribed as 3,11 (3.66/3.11). I am starting to think that maybe that assumption was wrong, and the debris in question had made its way back to the surface.
Post #911 clearly shows the location and date of recovery of that debris item.
Post #911 clearly shows the location and date of recovery of that debris item.
Join Date: Mar 2002
Location: Florida
Posts: 4,569
Likes: 0
Received 0 Likes
on
0 Posts
Is it just me, or does it look like the engine in the picture had not been turning at the moment of impact. If it had, you would expect fractured or bent blades all around, not just on one side, wouldn't you? Could suggest they suffered a flame out.
Of course the pics are4 quite low in resolution so far.
Occams razor suggests the most likely scenario is the engines were on the bottom of the wing when it hit flat shearing away all the soft structure around the engines (Large diameter cases and nacelle0, but leaving intermediate case behind the fan mostly intact.
Let's wait and see if any better photos show up.
Join Date: Oct 2007
Location: Europe
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Debris size & speed
After a high speed impact, the SR-111 MD11 disintegrated into 2 million (recovered) pieces*. CNN reported the biggest one was the size of a car door. The average length of the 160 miles of wire recovered was 3 ft. The large size of the debris spotted today clearly points to a very much lower speed at impact.
*Swissair 111 Crash Report Delayed
*Swissair 111 Crash Report Delayed
