Ethiopian airliner down in Africa
So how often does MCAS operate?
Naive question from slf. I seem to recall that T tail aircraft had stick pushers that operated if you got very close to the stall, but that you normally would not get that close.
At what angle of attack does MCAS operate and how far from the normal post take off angle of attack is this?
At what angle of attack does MCAS operate and how far from the normal post take off angle of attack is this?
Join Date: Oct 2017
Location: Vienna
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
At the same time, most would fail a simple attention test
not that it’s their fault. It’s due to the design of human brain. Yet we design machines pretending this is not the case. Just another human fault i suppose.
Join Date: May 2008
Location: El Paso, Texas
Age: 72
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
otoh, the Electra continued as the Navies P-3. For a very long time. One of the last Electra crashes I recall was attitude indicator failure.
Join Date: Feb 2015
Location: Front Left
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Is an Easy fix proof of sloppy work the first time around?
Here is a thought.
Rumors will have it that Boeing has an MCAS software fix by the end of March, a mere five months after the Lion Air crash, and if this fix is indeed a real fix, and not just a small tweak of some parameters, doesn't this show that Boeing has the knowledge, skills and capacity to crate safe MCAS software.
So this leads me to ask, if this is really true, why the hell did they not do it correctly from the beginning. I am certain that if it comes out that this is an easy fix, and that Boeing did not prioritize it the first time around, that Boeing will be open to severe liability claims.
Clearly this shows that the priority was to get the MAX out fast, and grab as many costumers from the NEO as possible.
I really think that a fast fix shows that Boeing could have done it correctly from the beginning, but chose not to spend the required resources on it.
Rumors will have it that Boeing has an MCAS software fix by the end of March, a mere five months after the Lion Air crash, and if this fix is indeed a real fix, and not just a small tweak of some parameters, doesn't this show that Boeing has the knowledge, skills and capacity to crate safe MCAS software.
So this leads me to ask, if this is really true, why the hell did they not do it correctly from the beginning. I am certain that if it comes out that this is an easy fix, and that Boeing did not prioritize it the first time around, that Boeing will be open to severe liability claims.
Clearly this shows that the priority was to get the MAX out fast, and grab as many costumers from the NEO as possible.
I really think that a fast fix shows that Boeing could have done it correctly from the beginning, but chose not to spend the required resources on it.
It seems as if the bottom line is that the safety margin of the legacy 737 was simply eroded to an unacceptable degree with the new engines and became “cigarette paper” thin with the MAX in the search for ever better fuel economy. Boeing recognized this during the development phase and tried to code their way out of it with MCAS thereby creating a solution which may well be more dangerous than the original risk.
Is that reasonable summary ?
I wonder what parameters have been changed with the new software patch, and I’m still curious about the purpose of the 5 second delay which could easily trick pilots into believing there was no problem with the system.
Is that reasonable summary ?
I wonder what parameters have been changed with the new software patch, and I’m still curious about the purpose of the 5 second delay which could easily trick pilots into believing there was no problem with the system.
Join Date: May 2008
Location: El Paso, Texas
Age: 72
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
No, i dont believe most are saying that exactly . . But aren't you equally saying engineers no longer need to be engineers (that live and breathe aeronautic and human interfaces, and are proactive designers, whilst this sounds a somewhat reactive solution ).
Amazed spinning that trimwheel about like that ever passed muster at Boeing let alone nodded through by AW @ FAA - a dozen things could be predicted to go wrong day one of concept by a brainstorming group of experienced systems and aeronautic engineers.
Amazed spinning that trimwheel about like that ever passed muster at Boeing let alone nodded through by AW @ FAA - a dozen things could be predicted to go wrong day one of concept by a brainstorming group of experienced systems and aeronautic engineers.
A software patch to fix and inherently unstable aircraft. brilliant. Cant wait for it
Join Date: Dec 2006
Location: Florida and wherever my laptop is
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Lion air's FDR show that the trim was moved to full of the available 7 notches (it's not clear how those translate to degrees). They would certainly still be alive if there as a limit. They kept it in air at ~ 3 notches. If max needs more to get out of stall, perhaps it does need a larger hstab/eleveator instead of a hacked together software?
Or perhaps the key really is the reset. Does mcas reset with each trim input and takes the current position as the new neutral? If AoA vane is sending wrong data it's easy to see how this would result in a runaway trim.
This image shows the difference between a 737-800 (yellow) and MAX (magenta). Notice the bigger nacelles and same hstab size.
I thought 0.6 was a hard limit... e.g, we move this much and then it's up to the pilot. If it was 0.6 every 5 seconds it's still bad, but at least easier to manage.
Or perhaps the key really is the reset. Does mcas reset with each trim input and takes the current position as the new neutral? If AoA vane is sending wrong data it's easy to see how this would result in a runaway trim.
This image shows the difference between a 737-800 (yellow) and MAX (magenta). Notice the bigger nacelles and same hstab size.
I thought 0.6 was a hard limit... e.g, we move this much and then it's up to the pilot. If it was 0.6 every 5 seconds it's still bad, but at least easier to manage.
Join Date: Jul 2009
Location: Geneva, Switzerland
Age: 69
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: Mar 2014
Location: WA STATE
Age: 78
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
At least thats how this SLF understands ..
Gender Faculty Specialist
Yes, it's to prevent reducing stick force at increasing alpha which is a certification failure. It's not for stall prevention.
Join Date: Sep 1999
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
I counted 14 and missed the gorilla.But thats not important.Whats important is that
Mullenberg doesnt miss the elephant in the room the next time round.
Boeing screwed the pooch on 3 counts:
-------->clandestine installation of MCAS
-------->MCAS activation based on single sensor
-------->failure to provide MAX simulators in good time for an aircraft whose differences cannot be trained on an ipad
Mullenberg is an MA in aeronautics and by all accounts a well-rounded guy.He has a good engineering background.
Hopefully hes the type who knows exactly whats going on on that assembly line and involved in the "nuts and bolts"
from the ground up.
The MAX can be safe,they just have to come clean and fix it.....and then win the flying public back again.I wish them
luck because in general they build great airplanes.
Mullenberg doesnt miss the elephant in the room the next time round.
Boeing screwed the pooch on 3 counts:
-------->clandestine installation of MCAS
-------->MCAS activation based on single sensor
-------->failure to provide MAX simulators in good time for an aircraft whose differences cannot be trained on an ipad
Mullenberg is an MA in aeronautics and by all accounts a well-rounded guy.He has a good engineering background.
Hopefully hes the type who knows exactly whats going on on that assembly line and involved in the "nuts and bolts"
from the ground up.
The MAX can be safe,they just have to come clean and fix it.....and then win the flying public back again.I wish them
luck because in general they build great airplanes.
I give full respect to the Ethiopian safety board investigating this crash.
but given that the two 737max crashes raise such massive questions about aircraft manufacturing,government and trans national oversight and trillion dollar industries as well national interests for the US aircraft msnufacturing industry vis a vis China snd Europe ,are the Ethiopians a tiny bit out of their depth?
but given that the two 737max crashes raise such massive questions about aircraft manufacturing,government and trans national oversight and trillion dollar industries as well national interests for the US aircraft msnufacturing industry vis a vis China snd Europe ,are the Ethiopians a tiny bit out of their depth?
Join Date: Jan 2018
Location: Amantido
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: May 2016
Location: Nantes
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Good thought. But I'd rather think they just weren't aware of any risks with their first software. And this is because they didn't spend the required ressources on safety analysis.
Join Date: Mar 2014
Location: WA STATE
Age: 78
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
8 years ago, An Airbus crashed due to a blocked' AOA sensor- which fooled both the pilots AND HALBUS .
So a few years later during gestation-certification of MAX, Boeing played word games re critical definitions in how failures affect safety of flight- which allowed a single point ' failure' to take control from pilot ( for the first time ever ? ) and then decdided to not notify anyone via some oversight or creative pencil whipping
https://news.aviation-safety.net/201...-check-flight/
Report: blocked AOA sensors caused loss of control during A320 check flight
note this was with experienced pilots !!
So a few years later during gestation-certification of MAX, Boeing played word games re critical definitions in how failures affect safety of flight- which allowed a single point ' failure' to take control from pilot ( for the first time ever ? ) and then decdided to not notify anyone via some oversight or creative pencil whipping
https://news.aviation-safety.net/201...-check-flight/
Report: blocked AOA sensors caused loss of control during A320 check flight
note this was with experienced pilots !!
Join Date: Nov 2018
Location: Canada
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
assuming that trim wheel is just like in the 727 and the stab does not move without that big wheel spinning and that it is as loud as it ever was? It is a powerful visual and aural que of what is going on. If it is turning then it should be because speed and or configuration is changing and if I have commanded neither and that stab is moving, I want to know about it.
Join Date: Aug 2008
Location: Singapore
Age: 74
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Isn't this rather similar to a Lufthansa A321 incident that occurred Nov 5th 2014, near Bilbao, (Spain), where the aircraft experienced a rate of descent of 4,000 FPM before the pilots got the aircraft back under control?
Incident recorded here: https://avherald.com/h?article=47d74074
And here: https://aviation-safety.net/wikibase/wiki.php?id=171411
Incident recorded here: https://avherald.com/h?article=47d74074
And here: https://aviation-safety.net/wikibase/wiki.php?id=171411