Emirates B777 gear collapse @ DXB?
Join Date: Mar 2007
Location: sydney
Age: 64
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I love the rumours too, however these two markedly different versions came from (A) the crew of an aircraft watching on from the holding taxiway and (B) the supposed brief report of the actual accident crew ! Hardly amateur observers . I found it an odd discrepancy. Ah well.
Join Date: May 2006
Location: Hotels
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Maybe it's time to remove those force feedback thrust levers and those dodgy little TOGA buttons.
All the 777 guys tell me a key safety feature of the 777 is that you get 'tactile' feedback of the thrust position. It seems in 3 recent crashes: Asiana, the 737 at AMS and this one, despite having those moving levers the crew managed to get the wrong thrust on the aircraft. Shadowing moving thrust levers is pointless unless you actually regularly use them manually.
If not using the manual thrust why not use the thrust levers to engage the auto-thrust mode you want......
All the 777 guys tell me a key safety feature of the 777 is that you get 'tactile' feedback of the thrust position. It seems in 3 recent crashes: Asiana, the 737 at AMS and this one, despite having those moving levers the crew managed to get the wrong thrust on the aircraft. Shadowing moving thrust levers is pointless unless you actually regularly use them manually.
If not using the manual thrust why not use the thrust levers to engage the auto-thrust mode you want......
Join Date: Dec 2001
Location: what U.S. calls ´old Europe´
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
With respect to the zoom-climb, inertia, momentum... positive climb discussion:
Isn´t it time to install 1940s Glider technology to our modern transport aircraft?
A total energy compensated VSI would indicate the real gain in energy, so you will not be tricked by the transfer of kinetic energy into vetical speed. Only if your altimeter and your total energy compensated VSI both show a positive indication, then you have a positive climb rate. During a bounce it should practically indicate zero. You will immediately notice, that you do not have the desired engine power.
All the instruments are today anyway controlled by computers which do have all the air- and inertia data, it would be a piece of cake to add this feature.
It may however take years for pilots to adopt to it, just like for civil pilots and AoA indicators... Never change a running system, no matter how easily it could be done.
Isn´t it time to install 1940s Glider technology to our modern transport aircraft?
A total energy compensated VSI would indicate the real gain in energy, so you will not be tricked by the transfer of kinetic energy into vetical speed. Only if your altimeter and your total energy compensated VSI both show a positive indication, then you have a positive climb rate. During a bounce it should practically indicate zero. You will immediately notice, that you do not have the desired engine power.
All the instruments are today anyway controlled by computers which do have all the air- and inertia data, it would be a piece of cake to add this feature.
It may however take years for pilots to adopt to it, just like for civil pilots and AoA indicators... Never change a running system, no matter how easily it could be done.
Join Date: Sep 2011
Location: earth
Posts: 1,098
Likes: 0
Received 0 Likes
on
0 Posts
ekwb
I disagree. One of the more discomforting things i felt changing onto the Airbus, was the non moving thrust levers. It was either "him" in control of thrust, or me, but in any case only one. On the MD11 we were never told not to disconnect the AT (moving levers) but to anticipate any move, to assist it. It turned out, that most pilots left the AT in and appreciated the nice symbiosis: If he was slow, i gave thrust, if i was lazy/fatigued or whatever, he backed me up.
With the many Airbus 320 getting into almost half of the airlines, the Airbus manners were installed into many young pilots. Today i can almost instantly tell, if a young colleague started airline ops in a 737 or in a 320. The latter using levers more as hand-rests than anything else because almost all airlines have a "don't disconnect the AT" policy.
It would be very interesting to check how many of the pilots who were involved in such incidents lately were exposed to Airbus previously.
Don't get me wrong, the Airbus is fine, just as is the Boeing. But i slowly come to the conclusion, that those who have started jet airline flying on a Bus should remain on a Bus and vice versa with Boeing. The very short and sometimes repetitive transitions seem to prove that it adds a slice to the Swiss cheese.
@ Volume:
Another gadget will not do the trick, we have too many installed anyway. In a moment where pilots are slightly stunned, the known procedures are mishandled if there are too many.
I suggest to simply go back to basics and fly the aircraft first, with your lower back and some trained hands.
I disagree. One of the more discomforting things i felt changing onto the Airbus, was the non moving thrust levers. It was either "him" in control of thrust, or me, but in any case only one. On the MD11 we were never told not to disconnect the AT (moving levers) but to anticipate any move, to assist it. It turned out, that most pilots left the AT in and appreciated the nice symbiosis: If he was slow, i gave thrust, if i was lazy/fatigued or whatever, he backed me up.
With the many Airbus 320 getting into almost half of the airlines, the Airbus manners were installed into many young pilots. Today i can almost instantly tell, if a young colleague started airline ops in a 737 or in a 320. The latter using levers more as hand-rests than anything else because almost all airlines have a "don't disconnect the AT" policy.
It would be very interesting to check how many of the pilots who were involved in such incidents lately were exposed to Airbus previously.
Don't get me wrong, the Airbus is fine, just as is the Boeing. But i slowly come to the conclusion, that those who have started jet airline flying on a Bus should remain on a Bus and vice versa with Boeing. The very short and sometimes repetitive transitions seem to prove that it adds a slice to the Swiss cheese.
@ Volume:
Another gadget will not do the trick, we have too many installed anyway. In a moment where pilots are slightly stunned, the known procedures are mishandled if there are too many.
I suggest to simply go back to basics and fly the aircraft first, with your lower back and some trained hands.
Join Date: Jun 2000
Location: last time I looked I was still here.
Posts: 4,507
Likes: 0
Received 0 Likes
on
0 Posts
Early rumours talked about a bounce. Later rumours talk about a ga at 30-40ft during flare. Neither may be true. It's a rumour network....
Apologies if already rumoured about: Not wishing to overly extend the speculation, when we should know the truth soon enough, but.......I wonder at the chicken & egg idea: was the bounce created by gear impact during a low GA? That might be difficult to decide for a spectator. It would also create quite a surprise factor in the flight deck, especially if hard. I wonder if there was a reversal of the GA decision and the thrust removed trying to land after all?
Apologies if already rumoured about: Not wishing to overly extend the speculation, when we should know the truth soon enough, but.......I wonder at the chicken & egg idea: was the bounce created by gear impact during a low GA? That might be difficult to decide for a spectator. It would also create quite a surprise factor in the flight deck, especially if hard. I wonder if there was a reversal of the GA decision and the thrust removed trying to land after all?
Join Date: Jul 2001
Location: Abroad
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Given that the precise impact of TOGA switches just pre- or post-ground contact may change one or more times in short time intervals, possibly generating confusion or misunderstandings, and since even a one-off ‘Check Thrust Set’ under AT does not guarantee thrust will not be gone a moment later, how about the following SOPs:
- No manual flying with AT On, i.e. AP Off means AT also Off
- All flying ‘close to the ground’, i.e. eg all flying below 500 ft agl is to be manual (in the above sense, AP and AT both Off) in all flight phases including GA. Only exception allowed for Cat III landing, but even then in case of GA disconnect both AP and AT
- Gear up only above 500 ft agl
I realise late gear up may hinder initial climb performance, but on the other hand calling gear up on the only evidence of positive climb or ROC when close to the ground leaves one exposed if ROC becomes negative right after…
- No manual flying with AT On, i.e. AP Off means AT also Off
- All flying ‘close to the ground’, i.e. eg all flying below 500 ft agl is to be manual (in the above sense, AP and AT both Off) in all flight phases including GA. Only exception allowed for Cat III landing, but even then in case of GA disconnect both AP and AT
- Gear up only above 500 ft agl
I realise late gear up may hinder initial climb performance, but on the other hand calling gear up on the only evidence of positive climb or ROC when close to the ground leaves one exposed if ROC becomes negative right after…
- No manual flying with AT On, i.e. AP Off means AT also Off
- All flying close to the ground, i.e. eg all flying below 500 ft agl is to be manual (in the above sense, AP and AT both Off) in all flight phases including GA. Only exception allowed for Cat III landing, but even then in case of GA disconnect both AP and AT
- Gear up only above 500 ft agl
- All flying close to the ground, i.e. eg all flying below 500 ft agl is to be manual (in the above sense, AP and AT both Off) in all flight phases including GA. Only exception allowed for Cat III landing, but even then in case of GA disconnect both AP and AT
- Gear up only above 500 ft agl
Join Date: Mar 2012
Location: Having a margarita on the beach
Posts: 2,427
Likes: 0
Received 0 Likes
on
0 Posts
- No manual flying with AT On, i.e. AP Off means AT also Off
- All flying close to the ground, i.e. eg all flying below 500 ft agl is to be manual (in the above sense, AP and AT both Off) in all flight phases including GA. Only exception allowed for Cat III landing, but even then in case of GA disconnect both AP and AT
- Gear up only above 500 ft agl
- All flying close to the ground, i.e. eg all flying below 500 ft agl is to be manual (in the above sense, AP and AT both Off) in all flight phases including GA. Only exception allowed for Cat III landing, but even then in case of GA disconnect both AP and AT
- Gear up only above 500 ft agl
Join Date: Dec 2006
Location: Florida and wherever my laptop is
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
The runways are 4000M so we have 4 kilometers of runway it is entirely possible that toward the 2 km mark that the surface wind was once again a headwind. So the aircraft pulls up in a tail wind as it crosses the sea breeze line and suddenly has 20Kts + of extra airspeed. That could give the illusion of power coming on and initial climb (back to somatogravitational illusions again) 200ft higher and not only does the wind drop again but the inertial climb is now petering out, the gear is traveling up and the engines are not spooling up. There is no way out but down after that.
As an edit:
Can anyone provide logical reasoning for why TOGA button is inhibited with weight on wheels? The throttles are not inhibited.
Join Date: Jul 2009
Location: Surrey, UK
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Early rumours talked about a bounce. Later rumours talk about a ga at 30-40ft during flare. Neither may be true. It's a rumour network....
I wonder if there was a reversal of the GA decision and the thrust removed trying to land after all?
I wonder if there was a reversal of the GA decision and the thrust removed trying to land after all?
Can anyone provide logical reasoning for why TOGA button is inhibited with weight on wheels? The throttles are not inhibited.
Join Date: Dec 2006
Location: Florida and wherever my laptop is
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
In that case it would make sense to only inhibit with weight on nose wheel. As we have seen here weight on main gear does not mean committed to landing. Weight on nose wheel indicates more commitment.
Join Date: May 2016
Location: Another FBO !
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Ian W
With all respect due to you (and you may well have even described the accident itself), I do struggle so, when I hear/read people saying "...the aircraft did this" or "the aircraft did that" and "...suddenly".
To be "harsh", if what you describe is what happened, I can only point out that the crew were not new to DXB or to the T7.
It was their "time to shine". And it may well be, they didn't.
Nor was the crew "new" to flying. Whilst "the book" states, call check power and verify Go Around thrust is set....and at a positive rate of climb, call positive rate, it "allows" for, shall we call it "discretion" (It is "a book" afterall. Mere pieces of paper. It doesn't actually "fly the plane").
By that I mean, if you don't think/feel/know....then don't call "positive rate". It's at your "discretion". You judge it !
If you think "ah.... it maybe xyz", then don't call it.
I apologise if it sounds "harsh", it is not meant in that way, nor is it direct at you. It's just, I hear "...then suddenly" alot these days !
With all respect due to you (and you may well have even described the accident itself), I do struggle so, when I hear/read people saying "...the aircraft did this" or "the aircraft did that" and "...suddenly".
To be "harsh", if what you describe is what happened, I can only point out that the crew were not new to DXB or to the T7.
It was their "time to shine". And it may well be, they didn't.
Nor was the crew "new" to flying. Whilst "the book" states, call check power and verify Go Around thrust is set....and at a positive rate of climb, call positive rate, it "allows" for, shall we call it "discretion" (It is "a book" afterall. Mere pieces of paper. It doesn't actually "fly the plane").
By that I mean, if you don't think/feel/know....then don't call "positive rate". It's at your "discretion". You judge it !
If you think "ah.... it maybe xyz", then don't call it.
I apologise if it sounds "harsh", it is not meant in that way, nor is it direct at you. It's just, I hear "...then suddenly" alot these days !
Join Date: Feb 2000
Location: Alaska, PNG, etc.
Age: 60
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
All the 777 guys tell me a key safety feature of the 777 is that you get 'tactile' feedback of the thrust position. It seems in 3 recent crashes: Asiana, the 737 at AMS and this one, despite having those moving levers the crew managed to get the wrong thrust on the aircraft.
Join Date: May 2003
Location: KGRB, but on the road about 1/2 the time.
Age: 61
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Asiana had the Autothrottles ON. Boeing told everyone, that with autothrottles ON, you would be speed protected...the plane wouldn't overspeed, and it wouldn't stall. Turns out Boeing's information to us was incorrect.
My airline is now changing their groundschool and training because of this. Our checkairman were VERY surprised to find out that they could stall with the autothrottles ON. Hopefully this accident will prevent some more serious ones in the future...
My airline is now changing their groundschool and training because of this. Our checkairman were VERY surprised to find out that they could stall with the autothrottles ON. Hopefully this accident will prevent some more serious ones in the future...
Join Date: Jul 2013
Location: uk
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Crash landing of Sukhoi Superjet at Keflavik 21 July 2013.
Test Flight 5 on board, deliberate engine shutdown at altitude 10 feet before landing as part of test, brief touchdown, selection of toga switch on wrong engine, gear retracted, fatigue cited, all 5 survived, its all there....
see news.aviation-safety.net/category/investigation-reports/page/2/
Icelandic RNSA Final Report No. M-01313/AIG-09 31.3. 2016.
Test Flight 5 on board, deliberate engine shutdown at altitude 10 feet before landing as part of test, brief touchdown, selection of toga switch on wrong engine, gear retracted, fatigue cited, all 5 survived, its all there....
see news.aviation-safety.net/category/investigation-reports/page/2/
Icelandic RNSA Final Report No. M-01313/AIG-09 31.3. 2016.
Controversial, moi?
Asiana had the Autothrottles ON. Boeing told everyone, that with autothrottles ON, you would be speed protected...the plane wouldn't overspeed, and it wouldn't stall. Turns out Boeing's information to us was incorrect.
Boeing did NOT 'tell everyone, that with autothrottles ON, you would be speed protected...the plane(sic) wouldn't overspeed, and it wouldn't stall.'
The way the autothrottle system functions has always been well known. It offers protection in certain modes but not all.
It seems to me, from all the utterly pointless speculation on previous pages, that many people think a technical solution should be found to prevent what they think happened in this accident. Firstly, they have no concrete information on what happened and, secondly, it is impossible to design systems such that poor training, poor systems understanding, poor execution of a manouevre, or a combination of all those things, will prevent accidents.
I flew the B777 for 6 years. I am currently an instructor on both B777 and B787s. They are fine aeroplanes. Unfortunately, they cannot ever be designed to be foolproof in the hands of the poorly trained or marginally proficient.
In the airline world today training is cut to an absolute minimum because of cost. It is my view there are many pilots flying who can pass a skills test but when something unusual happens then a positive outcome is not assured.
I have my own ideas what happened at Dubai but I do not feel the urge to waste time and effort pontificating about the unknown.
Originally Posted by portmanteau
Ian, Twr cleared 521 to land wind 100 11 kts ( and 20 seconds later said climb 4000 ft).