Silhouette challenge
Hi LM, Its a two bladed prop.
Bomber has been waiting for his walk for a while, so I will be out again for an hour or so. I'll check how you're doing when I get back.
Bomber has been waiting for his walk for a while, so I will be out again for an hour or so. I'll check how you're doing when I get back.
Last edited by Mechta; 7th Nov 2010 at 11:57.
Well done One11,
Correct on both counts. 'A' shed in the background rather gives the location away...
The Petrel was built here in Farnham. I saw six under construction, but only
two flew. The one pictured was a glider tug at Lasham until recently. Power on this one was a 180hp Lycoming.
Correct on both counts. 'A' shed in the background rather gives the location away...
The Petrel was built here in Farnham. I saw six under construction, but only
two flew. The one pictured was a glider tug at Lasham until recently. Power on this one was a 180hp Lycoming.
Join Date: May 2010
Location: EU
Age: 82
Posts: 5,505
Likes: 0
Received 0 Likes
on
0 Posts
Good evening / morning Gentlemen. What a beauty!
Must still stay in the hospital some more days for check-ups but will be online soon. Good to see you keep having fun.
Sent this using a friend's iPhone. Nice toy (pro-bono advertsement)
Take care. Over and out.
Must still stay in the hospital some more days for check-ups but will be online soon. Good to see you keep having fun.
Sent this using a friend's iPhone. Nice toy (pro-bono advertsement)
Take care. Over and out.
Join Date: Oct 2008
Location: Wales, UK
Age: 65
Posts: 6,062
Likes: 0
Received 0 Likes
on
0 Posts
Good evening.....looks like the Gwinn Aircar?
RegDep...good to hear from you . Hope you are all ok and that you will be let out soon. We've missed you on SC.
Cheers
Ken
RegDep...good to hear from you . Hope you are all ok and that you will be let out soon. We've missed you on SC.
Cheers
Ken
Join Date: Oct 2008
Location: Wales, UK
Age: 65
Posts: 6,062
Likes: 0
Received 0 Likes
on
0 Posts
Hah...2 minutes too late .
Morning mate, how are you?
I astonish myself sometimes! Just one of those I remembered....because it looks a little unusual
Morning mate, how are you?
How do you do it?.
Last edited by skytrain10; 7th Nov 2010 at 19:51.
That's were I went very wrong with some brickwork repair earlier this year. I didn't add PVA to the mortar mix and now it continually leaches lime in the form of powder and no paint will stick.
Anyway mate, I'll pop back later and see what you put up. Take requests? WW2 please!
Anyway mate, I'll pop back later and see what you put up. Take requests? WW2 please!
Join Date: Jan 2009
Location: Chester UK
Age: 84
Posts: 939
Likes: 0
Received 0 Likes
on
0 Posts
Skytrain10 takes control - having been first to get the Gwinn Aircar.
Thanks Noyade. Lacking top-of-range graphics software I find low tech is faster.
1 - Scan image B&W or "grayscale" - preferable one already mainly black
2 - Print
2 - Apply black felt tip as required
3 - re scan
Cheers , Doug
Mate I like it!! How do you do it?.
1 - Scan image B&W or "grayscale" - preferable one already mainly black
2 - Print
2 - Apply black felt tip as required
3 - re scan
Cheers , Doug