B737 Classic. Auto-Slat operation.
Thread Starter

Joined: Jun 2006
Posts: 1,204
Likes: 26
From: Australia
B737 Classic. Auto-Slat operation.
Simulator fidelity question. At gross weight of 50 tonnes and flap 1 selected and a demonstration of auto-slat is required. At approximately what IAS would you expect the auto-slats to actuate? Has anyone struck the situation under these conditions (simulator) where on auto-slat actuation, the leading edge devices "Disagree" amber light (forward panel) comes on in addition to the already green LED extended?
Per Ardua ad Astraeus
Joined: Mar 2000
Posts: 18,575
Likes: 4
From: UK
Unfortunately my tables give only Flap 0 and Flap 40. If it is any help, Vstickshake at Flap 0 at 50T is given as 159kts dropping to 130kts at Flap 40. I guess you may need to ask Boeing or a friendly Air Tester.
Joined: Nov 2003
Posts: 496
Likes: 12
From: UK
The actual speed is unimportant as it will depend upon the usual variables like thrust, loading, bank-angle, decelleration rate, etc. What should remain constant is the margin above stick-shaker that the autoslat will activate. This is usually about 3-5kts.




