Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

Helicopter down in Sydney 1st March 08

Wikiposts
Search

Notices
Rotorheads A haven for helicopter professionals to discuss the things that affect them

Helicopter down in Sydney 1st March 08

Thread Tools
 
Search this Thread
 
Old 26th March 2008 | 03:47
  #21 (permalink)  
 
Joined: Jan 2006
Posts: 309
Likes: 0
From: Australia
Yes I have it as an MPEG file - but I'm not sure how to post it. I think perhaps it's too large?

Perhaps someone can help with the technical aspects????

Di
Diatryma is offline  
Reply
Old 26th March 2008 | 03:54
  #22 (permalink)  
20 Anniversary
 
Joined: Dec 2003
Posts: 327
Likes: 40
From: Melbourne, Australia
If you are using Windows XP, try going to Accessories > Windows Movie Maker and import the MPEG file into there, then drag it into the storyboard area, then click Tasks and "Save to my computer" and play with the bitrates and values until it's a good balance between resulting size and quality.
Tickle is offline  
Reply
Old 26th March 2008 | 04:23
  #23 (permalink)  
 
Joined: Aug 1999
Aviation Qualifications: ATP+Mil
Posts: 4,411
Likes: 83
From: Gold Coast, Australia
Diatryma,

How big is the file? If you want to send it to me, I can host it for you.

PM me and I'll see what can be done
John Eacott is offline  
Reply
Old 6th October 2008 | 01:51
  #24 (permalink)  
 
Joined: Jan 2006
Posts: 309
Likes: 0
From: Australia
Chopper joyride pilot blamed for crash.......Sydney Morning Herald article October 3, 2008 - .....The pilot of a helicopter which crashed in northern Sydney earlier this year, seriously injuring four passengers, has had his licence suspended.An investigation revealed he was flying lower than his licence permitted and the craft breached weight restrictions.The Bell 206 JetRanger was being used for a 30th birthday party joyride when it crashed just before 1pm on March 1 in a backyard in Arcadia.An Australian Transport Safety Bureau investigation report released today 200801245 , reveals that the pilot's decision to fly low over the residential area breached the restrictions of his private pilot's licence.The report notes witness statements that the craft was
flying low over the trees
and that the
helicopter was being operated at a height from which recovery was not possible
It also reveals that the weight of the helicopter when it took off from Bankstown airport was 57 kilograms over the maximum take-off weight for its type, a clear breach of Civil Aviation Safety Authority regulations.
The Civil Aviation Safety Authority has advised that the pilots licence has been suspended after the accident pending a review by the authority
the report states. In testimony to the investigation, the pilot told investigators there was silence in the helicopter after he made a steep banking turn to the left.The craft crashed into the backyard of a family home, narrowly missing two teenage girls sitting in their loungeroom..............Di

Last edited by Diatryma; 6th October 2008 at 04:38.
Diatryma is offline  
Reply
Old 6th October 2008 | 11:14
  #25 (permalink)  
 
Joined: May 2002
Posts: 2,697
Likes: 71
From: Wanaka, NZ
Extract from accident report:

"When the helicopter executed the steeply banked turn to the left at low forward airspeed, the inertia in the main rotor blades and main rotor RPM would have decreased, resulting in less main rotor efficiency..."

Anyone who is more aerodynamics savvy than me care to comment on the veracity of this, viz, steep turns result in RPM decrease, resulting in less efficiency??
gulliBell is offline  
Reply
Old 6th October 2008 | 21:29
  #26 (permalink)  
 
Joined: Feb 2008
Posts: 17
Likes: 0
From: saigon
wouldn't rpm increase because of disc loading and total rotor thrust decrease because of the increase in coning angle?
nathan_m is offline  
Reply
Old 7th October 2008 | 00:32
  #27 (permalink)  
 
Joined: Aug 2003
Posts: 3,833
Likes: 2
From: Sale, Australia
"When the helicopter executed the steeply banked turn to the left at low forward airspeed, the inertia in the main rotor blades and main rotor RPM would have decreased, resulting in less main rotor efficiency..."
Think you may have to be gullible gulliBell to swallow that one in my opinion. Ask yourself "does the rotor droop when in a turn, no matter how steep?". Question 2. Under what conditions of powered flight does the rotor droop? Simple question me thinks. Governors in the main do a bloody good job and quickly regain any transient droop from a sudden application of power, providing you don't top out of course. Inertia in the main blades???? Can see where they may have come up with this argument, but the effect would be minimal and theoretically getting some what esoteric (fuselage begins turning in the same direction as rotor rotation so the rotor has to speed up in effect to maintain the same RPM with respect to its point of reference, the fuselage)
Brian Abraham is offline  
Reply
Old 7th October 2008 | 02:17
  #28 (permalink)  
 
Joined: Mar 2006
Posts: 358
Likes: 0
From: On the move...
Poorly worded.

Although the author hasn't used the word, is this overpitching?

Although in a turn, heavy aircraft, the aircraft has slowed and pilot has tried to accelerate, is it possible that he has overpitched and this has lead to rotor droop with the resultant bits that the author has then described?
CYHeli is offline  
Reply
Old 7th October 2008 | 22:45
  #29 (permalink)  
 
Joined: Dec 2005
Posts: 82
Likes: 0
From: NZ Southern Alps
The pilot made some stupid f$@&*%g choices and got an outcome consistent with the choices made.

The author of the report didn't say that in so many words either.

GP
Gas Producer is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.