EC135
Join Date: Nov 2007
Location: 55 degrees north ish.
Age: 53
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Why not submit a RFI (request for information) to EC UK, they have fitted many of these to UK aircraft.
pm me if you would like a specific email address.
pm me if you would like a specific email address.
Join Date: Nov 2004
Location: UK
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Aucky - to your question "does that swap with the window?", the answer is effectively "yes", although the "with ease" bit may be more of a challenge. It's effectively a one for one swap, just the skill of the engineer that dictates how long it takes them to get the rubber strip back in, as either window tend to be a bit of a b**tard to re-fit.
Just beware that if you intend to practice an emergency push out of a sliding door window, and you have the choice, use the one without the sliding insert. I heard on the (good authority) grapevine that someone tried pushing out one with the insert but, owing to the small amount of original plastic (frame) around the sliding insert, one good thump split the plastic and effectively wrote off the window!
Didn't learn if the insert was able to be re-used?
Just beware that if you intend to practice an emergency push out of a sliding door window, and you have the choice, use the one without the sliding insert. I heard on the (good authority) grapevine that someone tried pushing out one with the insert but, owing to the small amount of original plastic (frame) around the sliding insert, one good thump split the plastic and effectively wrote off the window!
Didn't learn if the insert was able to be re-used?
ASB EC135 62A-029
ASB62-029 MAIN ROTOR SYSTEM – Main Rotor Hub-Shaft - Visual inspection of the upper and lower hub-shaft flange for cracks - Rev3
With Revision 3 of this Alert Service Bulletin Part 3 of the Alert Service Bulletin is no longer required.
With Revision 3 of this Alert Service Bulletin Part 3 of the Alert Service Bulletin is no longer required.
Part 3 being
(a) Accomplish the visual inspection in the area of the blade bolts i.a.w. Section 3.B. Part 3 within the next 10 fh after receipt of this Alert Service Bulletin and repeat every 10 fh.
That removes a serious logistics headache for now at least!
Join Date: Sep 2000
Location: UK
Age: 47
Posts: 1,595
Likes: 0
Received 0 Likes
on
0 Posts
Rotary Wing,
my sarcasm didn't come across me thinks.
Amazing how well they work.Not.
We have made sure the arm on which the screen is bolted on to is taken out as well when the screen is u/s because you couldn't really call it safe in case of an incident......
my sarcasm didn't come across me thinks.
Amazing how well they work.Not.
We have made sure the arm on which the screen is bolted on to is taken out as well when the screen is u/s because you couldn't really call it safe in case of an incident......
Join Date: Mar 2002
Location: 3 Degrees North
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Stretcher for 135
Hi,
Can you recommend a supplier for a simple stretcher kit that would fit in the internal cabin rails? we are not a medevac operator, but a private timber operator in the South East Asian jungle.
I need to be able to do a quick change from a rear 4 seats corporate cabin interior to only keeping 2 rear seats and a stretcher whenever there is an emergency evacuation required
Rgds
WLM
Can you recommend a supplier for a simple stretcher kit that would fit in the internal cabin rails? we are not a medevac operator, but a private timber operator in the South East Asian jungle.
I need to be able to do a quick change from a rear 4 seats corporate cabin interior to only keeping 2 rear seats and a stretcher whenever there is an emergency evacuation required
Rgds
WLM
Join Date: Nov 2007
Location: 55 degrees north ish.
Age: 53
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Bucher Leichtbau AG
Air rescue / Police equipment - Bucher Leichtbau AG, Bucher Aerospace, Galleys, Stowages, Catering Carts, Trolleys, Aircraft Parts, Cabin Interior Equipment, Emergency Medical Systems, Aircraft Stretchers, Air Rescue Equipment, Video Arms, Video Depl
Same products used in UK Police Aircraft.
Air rescue / Police equipment - Bucher Leichtbau AG, Bucher Aerospace, Galleys, Stowages, Catering Carts, Trolleys, Aircraft Parts, Cabin Interior Equipment, Emergency Medical Systems, Aircraft Stretchers, Air Rescue Equipment, Video Arms, Video Depl
Same products used in UK Police Aircraft.
is
A question for which TM didn't have an answer. On Pratt, you get a fadec fail at very low power setting. With twistgrip in neutral you flip out the pins and rotate the twistgrip past neutral to high setting. Doest the rate of twistgrip ensure that even at very low power fadec fail, the twistgrip can still deliver max power if needed?
These fadec/twistgrip governing ranges are a bit unclear to me.
These fadec/twistgrip governing ranges are a bit unclear to me.
Last edited by Phoinix; 5th Oct 2012 at 17:34.
Join Date: Aug 2007
Location: Germany
Age: 60
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Foldable stretcher
Hi WLM,
we also use the foldable Bucher-stretcher which works very well for as as we fly transports of injured persons only occasionally.
Sent you a PM.
Kind regards
Tom
we also use the foldable Bucher-stretcher which works very well for as as we fly transports of injured persons only occasionally.
Sent you a PM.
Kind regards
Tom
Phoinix,
From what has been shown to me if you set the offending engine at ~ .7 VEMD or thereabouts you can fly the full flight envelope without the other good engine exceeding OEI limits.
The training policy at ECD these days is you can chase numbers all over the place yet the reality is you don't need to.
Apparently you do not get "FULL" power in manual. Whatever FULL means.
And you will not get it on a Bell 205 or 212 or 412 either so....................
From what has been shown to me if you set the offending engine at ~ .7 VEMD or thereabouts you can fly the full flight envelope without the other good engine exceeding OEI limits.
The training policy at ECD these days is you can chase numbers all over the place yet the reality is you don't need to.
Apparently you do not get "FULL" power in manual. Whatever FULL means.
And you will not get it on a Bell 205 or 212 or 412 either so....................
Last edited by RVDT; 5th Oct 2012 at 23:37.
Just a feedback from a ECD test pilot... twist grips give you twice the range needed, so if FADEC is stuck in minimum position, you are able to get the whole twist for full power if needed.
And a really serious question I couldn't find a solution for on T.I.P.I.
The modification for tail mounted balancing weights. Where can we (our company) get the modification done (Other than ECD).
Is the modification really an airframe modification, or is it just "light upgrade work". - I'm not up to maintenance phraseology.
And a really serious question I couldn't find a solution for on T.I.P.I.
The modification for tail mounted balancing weights. Where can we (our company) get the modification done (Other than ECD).
Is the modification really an airframe modification, or is it just "light upgrade work". - I'm not up to maintenance phraseology.
Join Date: Jun 2011
Location: below sea level
Age: 44
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Tail balance weights mod
Hi Phoinix,
If your company is situated in Slovenia.
You can look if some big operator in Germany (ALT, DRF...) can perform this modification for you.
I think you can call this a modification because the aft structure of the fenestrone body is modified with a mounting bracket, weights and an access panel. Also your weight and balance is affected.
Its not an afternoons job...
Some of my own experience. We have the weights also installed but the brackets tend to crack after time. We received the upgraded brackets which are from thicker material but also these have cracks reported.
Hope you can use this info.
If your company is situated in Slovenia.
You can look if some big operator in Germany (ALT, DRF...) can perform this modification for you.
I think you can call this a modification because the aft structure of the fenestrone body is modified with a mounting bracket, weights and an access panel. Also your weight and balance is affected.
Its not an afternoons job...
Some of my own experience. We have the weights also installed but the brackets tend to crack after time. We received the upgraded brackets which are from thicker material but also these have cracks reported.
Hope you can use this info.