Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

Robinson Safety Courses

Rotorheads A haven for helicopter professionals to discuss the things that affect them

Robinson Safety Courses

Old 30th Jan 2005, 09:05
  #141 (permalink)  
 
Join Date: Jan 2005
Location: Australia
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
R22 Safety Courses

Have just completed a R22 Safety course and am wondering what other people that have been to one of these think of them. Thank you for your time
CHOPPER74 is offline  
Old 17th Jan 2006, 16:59
  #142 (permalink)  
 
Join Date: Nov 2003
Location: USA
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CHOPPER74
Have just completed a R22 Safety course and am wondering what other people that have been to one of these think of them. Thank you for your time
I thought is was worth the money. However Tim Tucker at times would simply not answer our questions. When asked an occassional tough question he'd sometimes shoot back "We'll get to that!" and then, well...he'd never get to it.
Pat Cox was absolutely the best and I'd take his course if time allowed.
I think Tucker needs to get over himself.
What did you think of the course?
13snoopy is offline  
Old 18th Jan 2006, 03:27
  #143 (permalink)  
 
Join Date: Jan 2006
Location: Canada
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Safety Course was well worth while, Who is LU?

I am not new to the forum as I have lurked for a while.

I would recommend the Robinson Safety Course to anyone that has the time and money to go to Torrance. The factory tour shows you not only how they are made but the great care that goes in to making them.

I am not a devout Robinson follower and have flown other makes and models but it is hard to beat the Robinson product for what it is signed to do. Frank Robinson has brought helicopter ownership to many individuals and organizations that could not other wise afford a light turbine machine.

Speaking of design, Who is LU? Not a pilot but he says he has been associated with helicopter for 20-30 years. I have been associated with the local hospital for about the same amount of time but that does not make me a Doctor. In a past professional career, I also built and rebuilt hospitals but they still do not call me Doctor either.

Yes, I do fly a Robinson as a police pilot and I do fly it out of trim, LOTS. They are great machines but admit ably not perfect.
Air-Five-oh is offline  
Old 18th Jan 2006, 14:03
  #144 (permalink)  

Senis Semper Fidelis
 
Join Date: Feb 2001
Location: Lancashire U K
Posts: 1,288
Likes: 0
Received 0 Likes on 0 Posts
Air 5 ,

Lu was Lu Zuckerman( I havn't seen him on the Pprune for some time I hope he is still around, for he was very ill) however it seems that he had spent many years working in the Aviation construction industry and whilst he was not a Pilot, he did have a very sound engineering background, his attitude to the Robinson Helis was to say the least a little biased, in fact I cannot remember seeing anywhere any praise from him regarding the fact that F Robinson had brought Helis within the grasp on many erstwhile earthlings who wished to fly the only worthwile sort of flying I know, on a lot of occasion he was ruthlessly treated by many individuels but he never lost it nor resorted to name calling, he was able to doggedly keep a subject alive by constantly refusing to back down( he must have been hell to work with) I am but a mere PPL(H) and found some of his posts were well worthy of attention, remember it takes alsorts to run this world of our and he knew an awful lot more than I ever will!

So despite your comments about Doctors, I suppose you could say he was an "Elder Statesman" of the Rotorheads Forum. I feel few will disagree!

Many regards

Peter R-B
Vfr

Thankyou Tinnie for correcting my mistaken tense, and lack of knowledge regarding Lu Zuckerman. I have altered the tense where needed, also I offer my very sincere late condolences to Lu's family, may he rest in peace .

Last edited by Vfrpilotpb; 19th Jan 2006 at 11:59.
Vfrpilotpb is offline  
Old 18th Jan 2006, 15:30
  #145 (permalink)  
 
Join Date: Jan 2005
Location: Out there somewhere
Posts: 353
Likes: 0
Received 0 Likes on 0 Posts

Peter. Regarding 'LU', I believe he passed away a few months back. Hope my post is correct and if not, very sorry 'LU'
IntheTin is offline  
Old 18th Jan 2006, 17:17
  #146 (permalink)  
 
Join Date: Jan 2006
Location: Cage wheel
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
You are right - Lu is no longer with us....
unhappyhamster is offline  
Old 27th Nov 2006, 08:46
  #147 (permalink)  
 
Join Date: Oct 2004
Location: uk
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Robinson Safety Courses

Does anyone have any feed back on the Robinson safety courses run by Mornington- Sanford Aviation?
cholmondeley is offline  
Old 27th Nov 2006, 09:22
  #148 (permalink)  
 
Join Date: Aug 2006
Location: YORKSHIRE
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
I did it with them back in 2001.

Learned lots of things I had not been taught for the PPL.

It is, I recall, only about R22/R44.

Well worth doing, if you value safety.

pvm
ppvvmm is offline  
Old 27th Nov 2006, 10:32
  #149 (permalink)  
 
Join Date: Jul 2002
Location: UK
Posts: 2,953
Received 12 Likes on 8 Posts
Very good. As close as you'll get to the 'factory course' in the UK.

Even worthwhile if you don't fly Robinsons. A very useful post-PPL (or even pre-CPL) course that covers lots of issues relating to flying any helicopter, not just R22/R44.


HTH,

B73
Bravo73 is offline  
Old 27th Nov 2006, 23:07
  #150 (permalink)  
 
Join Date: Jun 2005
Location: Here, There and Everywhere!!
Posts: 163
Likes: 0
Received 0 Likes on 0 Posts
I have been on both the Torrence course and Richards course. The Torrence course is excellent on the mechanical side of the R22 but Richard really knows his stuff on the Icing side!!

An absolute must if your a 22 or 44 driver. Even if its just the videos that make you realise how quick these things can bite you in the ass if you misrespect them.

You can never have too much knowledge and you can never beat refresher courses!

R22
R22DRIVER is offline  
Old 20th Aug 2007, 22:21
  #151 (permalink)  
 
Join Date: Jun 2004
Location: UK Scotland
Age: 62
Posts: 192
Received 0 Likes on 0 Posts
Robinson safety course

In a couple of weeks I am attending a Robinson safety course headed by Tim Tucker in Scotland.I have attended one before at sloanes about 8 years ago but am looking forward to learning anything more that I can especially where safety is concerned. Any tips or suggestions on what to look for or ask about ?.Will be happy to report on my experience if anyone interested.
EDITED to add do you guys and gals think it's worth attending this type of course.I thought it was when I did the original one .
R

Last edited by RINKER; 21st Aug 2007 at 12:12. Reason: additional thought due to lack of response
RINKER is online now  
Old 22nd Aug 2007, 23:29
  #152 (permalink)  
 
Join Date: May 2007
Location: Cambs, UK
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Hi Rinker,

I'm going to attend one of these when I get around to it- will probably be at Sloane or Cambridge as neither is too far from me. I take it you got some useful info from it if you're attending a second?
I'd be interested to learn of your experience when you've finished.

cheers
Si
slim40 is offline  
Old 23rd Aug 2007, 00:37
  #153 (permalink)  
 
Join Date: Jan 2006
Location: Canada
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Save up for a cheap flight to the USA and take the Factory course at the factory. The tour of the facility is worth the cost of the plane ride alone.
Air-Five-oh is offline  
Old 23rd Aug 2007, 01:41
  #154 (permalink)  
 
Join Date: Jan 2006
Location: New Zealand
Age: 51
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
I did the course with Tim Tucker a year ago and it was worth every cent. I learnt about a lot about other types as well as Robbies. I now look at the R22 and 44 in a whole new light when preflighting and even as an Engineer i've found the knowledge gained invaluble when working on them too. If I could justify the cost I would love to have a look around the factory sometime.
Heli-kiwi is offline  
Old 23rd Aug 2007, 05:49
  #155 (permalink)  
 
Join Date: Oct 2002
Location: USA
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
In regards to the comment about learning more about the R22/44, while that may be true, I found a vast majority of the topics covered at the safety course to be generic to any rotorcraft. Most of the ways people kill (or hurt) themselves in Robinsons are not exclusive.

Actually, one of my after action comments was that I thought I'd learn more about the R44 and its systems (i.e. Bell 206 Initial).

I found it to be an excellent safety refresher. Not just a R44 lesson.
Hoss
HOSS 1 is offline  
Old 23rd Aug 2007, 12:52
  #156 (permalink)  
 
Join Date: Jan 2005
Location: Darwin
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Flights with Tim

I did the RHC course with Tim in the early 80s, when he recounted a tale, where an instructor, having told his passenger to disembark and arrange the refuelling, then leapt thoughtlessly into the hover. From the LH seat.

This of course places the C of G too far left, and full right cyclicwill not stop the left drift.

Being a man of "belated foresight" he then decided to hover sideways around the corner, to avoid crashing outside the FAA's offices.

But on the way, he found that by lying across the RIGHT seat, the drift could be arrested, and a safe landing made.

Which instructor? Ask Tim.

thekite
thekite is offline  
Old 23rd Aug 2007, 13:05
  #157 (permalink)  
 
Join Date: Feb 2005
Location: Australia
Posts: 1,957
Likes: 0
Received 0 Likes on 0 Posts
You could ask him - how come he doesn't leave the collective up for at least two seconds in an EOL?- like some blokes who have been on Pprune reckon they do.

He may just tell you how long it took him to learn how to hold it for the regulation one second.
topendtorque is offline  
Old 23rd Aug 2007, 13:21
  #158 (permalink)  
 
Join Date: Jan 2005
Location: Darwin
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Tims Flights

TeT:
I'm a little rusty on the finer points of EOL. Regarding 1 second/2 second pitch pull; "please explain?"

thekite
thekite is offline  
Old 24th Aug 2007, 12:35
  #159 (permalink)  
 
Join Date: Feb 2005
Location: Australia
Posts: 1,957
Likes: 0
Received 0 Likes on 0 Posts
The Kite,
sorry , shoddy explanantion, I mean sitting there with the collective still up - AFTER - the engine has hypothetically quit.

He relays that he has this very BIG (roll the eyes now) clock on the panel which indicates ~ and records for the big time FAA boys ~ just how quickly, or slowly, he puts the lever down.

.98 seconds delay , easy, the regulation one full second, not so easy.
cheers tet
topendtorque is offline  
Old 24th Aug 2007, 13:12
  #160 (permalink)  
 
Join Date: Jan 2005
Location: Darwin
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
to TeT

Thanks for that: I recently posted on a thread "how long have you got?" (after the engine quits.)

I said that in my days as a R22 instructor, I would often chop the throttle if the student dared to take his/her hand off the throttle during climb. And I never once kept the revs in the green, even though I dumped the collective myself.

Graphic? You bet. Necessary? I think so. Dangerous??????

Can I say: I was much younger then. But in a sense, nearer to death than I am now.

thekite
thekite is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.