Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Simple question about the C5 Galaxy


Notices
Tech Log The very best in practical technical discussion on the web

Simple question about the C5 Galaxy

Old 6th January 2003 | 20:35
  #1 (permalink)  
Thread Starter
 
Joined: May 1999
Posts: 159
Likes: 0
From: Can't remember
Simple question about the C5 Galaxy

Hi Simple one for you, can anybody tell me if the lower deck (large cago area) on a C5 is pressurised, or is it just the upper deck , Cant seem to find any thing on the net about it.

Cheers, SP
Squealing Pig is offline  
Old 6th January 2003 | 20:51
  #2 (permalink)  
20 Anniversary
 
Joined: Jun 2002
Posts: 485
Likes: 6
From: Avon, CT, USA
It's pressurised, they do carry troops in the cargo area. Some large Russian transports, however, are unpressurised.
ATPMBA is offline  
Old 6th January 2003 | 20:54
  #3 (permalink)  
Thread Starter
 
Joined: May 1999
Posts: 159
Likes: 0
From: Can't remember
that was quick !, Thanks ATPMBA thought as much !
Squealing Pig is offline  
Old 7th January 2003 | 01:14
  #4 (permalink)  
Community Builder
20 Anniversary
 
Joined: Dec 2002
Aviation Qualifications: ATP+Mil
Posts: 3,984
Likes: 568
From: Where the Quaboag River flows, USA
Not only is it pressurized and heated, for normal ops it is required for structural integrity and airframe life. Unpressurized flights are usually for the minimum necessary to get to a maintainance station. It's heated, but is somewhat cold downstairs inflight. We very,very rarely carry passengers or troops down there. I believe the C-5ski is not pressurized or accessible in-flight.

Galaxy Flyer
galaxy flyer is offline  
Old 7th January 2003 | 06:30
  #5 (permalink)  
 
Joined: Dec 2001
Posts: 941
Likes: 0
From: what U.S. calls ´old Europe´
You can tell from the upper deck floor structure, that the lower deck must be pressurized. Such a wide floor with these small floor beams can´t stand the pressure loads, as been proved by the THY DC-10 Accident over France in the 70s.
Volume is offline  
Old 7th January 2003 | 07:56
  #6 (permalink)  
20 Anniversary
 
Joined: May 2001
Posts: 61
Likes: 0
From: Italy
Hi Galaxy Flyer

just out of curiosity: can you tell me what are the C5's crosswind speed limit with dry/wet runway condition.

thanks
B_D
Black_Dawn is offline  
Old 7th January 2003 | 22:40
  #7 (permalink)  
Community Builder
20 Anniversary
 
Joined: Dec 2002
Aviation Qualifications: ATP+Mil
Posts: 3,984
Likes: 568
From: Where the Quaboag River flows, USA
Well, it's a fairly complex answer. The crosswind gear is no longer installed having been removed from the A's and replaced with the B-model gear that is simpler and easier to maintain.

Dry runway the crosswind limit at a normal wgt. (say 200 mT, 540,000 lbs) would be about 35 knots direct cross. Wet runway about 23 knots, I suppose; the engineers have some cosmic charts that after 15 years still escape me. When the RCR goes below 12 (ie snow or ice covered) the crosswind component allowed goes rapidly toward about 5-6 knots. Below RCR 12 there is a separate chart for take-off and landing; landing being more restrictive in most cases. If the take-off involves a V1 less that Vr, it is more restrictive still. The time between V1 and Vr is rather dicey, it feels like you are flying in very close proximty to the earth. It's very light on its feet. All that said, a limiting crosswind landing usually doesn't seem very difficult. Though, I've had some hairy landings in the Azores and some Western US stations. Overall, a nice flying machine
galaxy flyer is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.