Approach chart - "LOC"
Joined: Jun 2000
Posts: 4,507
Likes: 4
From: last time I looked I was still here.
It would be easier to see the whole chart. LOC can mean Locater = NDB, but why repeat that title at LOM and with different altitudes? It can also mean LOCALISER (LLZ) and thus be crossing altitudes for a Glide Slope out LOC only approach. I would expect there to be a DME v ALT table as well as these 2 waypoints.
Please show the whole chart.
Please show the whole chart.
Joined: Sep 2002
Posts: 141
Likes: 0
From: Muscat
ICAO Abbreviation and Codes are in ICAO Doc 8400
LOC means Localiser
These are Localiser check/step heights
Rat5 the Locator beacons (NDB) are indicated as LO (Outer marker) and LM (Middle Marker) on ICAO Charts. Most of these have been removed and now just have the check heights with a DME reference. I see this chart still uses LOM and then MM and IM which are non-ICAO standards
LOC means Localiser
These are Localiser check/step heights
Rat5 the Locator beacons (NDB) are indicated as LO (Outer marker) and LM (Middle Marker) on ICAO Charts. Most of these have been removed and now just have the check heights with a DME reference. I see this chart still uses LOM and then MM and IM which are non-ICAO standards





