Coasting onto stand.
If the APU fails you have 6 full applications of the accumulator mate....from 8 to 10 kts more than enough to stop.
Remembering that the accumulator is certified and good enough to stop the Aircraft from landing speeds according to Boeing...( significantly faster than 10 kts )
And besides, the APU generator is "put on the busses" and stabilized way before you "cut both" If you left it that late then you deserve a cluster f***
It's been done in the circumstances I describe many many times in 40 years on 737's 727's DC-9's etc WITH NOT A SINGLE INCIDENT ATTRIBUTED TO THE PRACTICE.
So, get a life.
Are you sure YOU are a real Pilot.
Remembering that the accumulator is certified and good enough to stop the Aircraft from landing speeds according to Boeing...( significantly faster than 10 kts )
And besides, the APU generator is "put on the busses" and stabilized way before you "cut both" If you left it that late then you deserve a cluster f***
It's been done in the circumstances I describe many many times in 40 years on 737's 727's DC-9's etc WITH NOT A SINGLE INCIDENT ATTRIBUTED TO THE PRACTICE.
So, get a life.
Are you sure YOU are a real Pilot.
Last edited by nitpicker330; 26th Aug 2013 at 10:33.
It's been done in the circumstances I describe many many times in 40 years on 737's 727's DC-9's etc WITH NOT A SINGLE INCIDENT ATTRIBUTED TO THE PRACTICE.
So, get a life.
Are you sure YOU are a real Pilot.
So, get a life.
Are you sure YOU are a real Pilot.
Oh dear, handbags at dawn?
OK, let me ask you this. Is this "procedure" of yours certified and approved by the aircraft manufacturers?
I only ask because when the company I fly for were looking at single engine taxying in, they took it very seriously and carefully. They got permission from the manufacturer and took advice and wrote a checklist for the procedure. Even then, owing to an unknown hidden software fault on some aircraft; when the engine was cut, the brakes were immediately applied fully on without any command from the pilots - very nasty. This was obviously unintended, and investigation discovered the fault.
Their checklist for single engine taxying includes: the APU has to be on line and stabilised. The electric Yellow hydraulic pump has to be selected on. The main engine in question has to be sufficiently idled and cooled. The aircraft has to be taxying in a straight line and with feet off the brakes on a straight taxiway clear of obstacles. Only then can we cut one engine. (The electrical busses only transfer to the APU generator when the engine is cut).
So back to your procedure; How would you feel if one day the brake accumulator was faulty, or when you cut both engines, you had an engine tailpipe fire warning distracting you as you coasted onto stand, and you ran over a ramp worker? It's just not the sort of unnecessary risk one would expect an airline pilot to take.
Last edited by Uplinker; 26th Aug 2013 at 11:09.
At any interview, the following question will be asked of both pilots:
"Is this an SOP?"
If the answer is "yes" and a company reference can be provided that all will be well. If not...
"Is this an SOP?"
If the answer is "yes" and a company reference can be provided that all will be well. If not...
Thread Starter
Join Date: Sep 2004
Location: Exeter
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Let's face it folks - it's a donkey move to shut both engines down before arriving on stand. No question.
All your are trying to achieve is the miss-placed adulation of the person in the other seat - it ain't gonna save a significant amount of fuel or ANY time and all it could really increase is the risk factor in you day.
Thanks for all the opinions, I'm a little suprised to hear people who think it works though. Any response from our Emerald Isle colleagues? Is this an SOP? Is it taught on the line? From what I've seen of crew that have previously worked for them they are very good and don't stray away from SOPs in the least.
All your are trying to achieve is the miss-placed adulation of the person in the other seat - it ain't gonna save a significant amount of fuel or ANY time and all it could really increase is the risk factor in you day.
Thanks for all the opinions, I'm a little suprised to hear people who think it works though. Any response from our Emerald Isle colleagues? Is this an SOP? Is it taught on the line? From what I've seen of crew that have previously worked for them they are very good and don't stray away from SOPs in the least.
I am a retired FE and one of the things I was paid to do was to look at the scenario and try to anticipate the unforseen consequences of certain actions. Having seen and heard about the results of some smooth operator's non standard aviation tricks I can only advise pilots to keep it standard. When it hits the fan you will find your capacity is greatly reduced and you need a standard act to fall back on with the normal checklists while you concentrate on the abnormals.
Can you imagine in a court being asked by a lawyer why you saw fit to deviate from SOPs?
SOPs, checklists and limitations are there for a reason and it is not for the likes of us to bend them to suit ourselves.
Can you imagine in a court being asked by a lawyer why you saw fit to deviate from SOPs?
SOPs, checklists and limitations are there for a reason and it is not for the likes of us to bend them to suit ourselves.
Join Date: Dec 2012
Location: UAE
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
This thread's quite hilarious.
I now understand why some aussie pilots have earnt the 'Austronaut' title, based on Nitpickers demeanour. Mate.
A bit unfair really as they usually make far better pilots than cricket or rugby players.
I now understand why some aussie pilots have earnt the 'Austronaut' title, based on Nitpickers demeanour. Mate.
A bit unfair really as they usually make far better pilots than cricket or rugby players.
they usually make far better pilots than cricket or rugby players.
Bas - didn't even remark last score to Oz DiL; she might hit me
Join Date: Mar 2007
Location: Another Planet.
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
WHAT WAS THAT WARNING LIGHT?
This is a strange sort of behaviour to advocate.
My simple NG throws up all sorts of lights, blue and amber with MWS cautions even when only one is shutdown. I brief my oppo, as we decide to stop the appropriate (usually RH donk), to expect lights various, and as they occur they are all checked and accounted for.
So as you coast onto stand and even more system failure annunciators are lighting up, can you be absolutely certain NONE of them is something CRITICAL?
Methinks this profession's aptitude testing needs a radical overhaul to identify and isolate (chop!) those who wish to operate like this, or defend those who do!
My simple NG throws up all sorts of lights, blue and amber with MWS cautions even when only one is shutdown. I brief my oppo, as we decide to stop the appropriate (usually RH donk), to expect lights various, and as they occur they are all checked and accounted for.
So as you coast onto stand and even more system failure annunciators are lighting up, can you be absolutely certain NONE of them is something CRITICAL?
Methinks this profession's aptitude testing needs a radical overhaul to identify and isolate (chop!) those who wish to operate like this, or defend those who do!
Join Date: Jul 2013
Location: equatorial side of the Polar Jet
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
roller coaster risk management
Here is your gotcha!
Imagine taxiing in heavy with a tailwind, Engines fuel cut off, roller coasting in with a smug grin...and RingRing!!! APU fire..AND some ramp vehicle is about to intercept your path...and need I add some unruly passengers at the sound of engines being shut down decide to stand and remove luggage from over head bins...and Mr.Murphy decides to thrown in a brake failure scenario or nosewheel deflation...that cockpit ain't gonna smell too good! Now imagine in command is ...Mr. Bean!
Imagine taxiing in heavy with a tailwind, Engines fuel cut off, roller coasting in with a smug grin...and RingRing!!! APU fire..AND some ramp vehicle is about to intercept your path...and need I add some unruly passengers at the sound of engines being shut down decide to stand and remove luggage from over head bins...and Mr.Murphy decides to thrown in a brake failure scenario or nosewheel deflation...that cockpit ain't gonna smell too good! Now imagine in command is ...Mr. Bean!
Last edited by Trackdiamond; 26th Aug 2013 at 19:08.
Person Of Interest
Join Date: Jan 2000
Location: Keystone Heights, Florida
Age: 68
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
So in reply to Uplink...He is exactly correct...My experience with a major US carrier (Eastern Airlines) was shut down an engine on taxi in...But I was on the 727 and it was always #2...to lessen the footprint.
As far as powerback goes...yes we did that also...but only on certain gates at certain airports...Reason? Powerback requires a trained ground crew (with goggles) to direct you. Additionally, all GSE needs to be secured...lots of wind hitting the terminal, gate area...
Another issue was 2 engine powerbacks...we did it but only if taxi wgt was less than 160,000 lbs...(MGTOW of some of our 727's was 191,000)
It is always a physics vs cost over-ridden by safety
Sometimes good piloting, sometimes foolish...
As far as powerback goes...yes we did that also...but only on certain gates at certain airports...Reason? Powerback requires a trained ground crew (with goggles) to direct you. Additionally, all GSE needs to be secured...lots of wind hitting the terminal, gate area...
Another issue was 2 engine powerbacks...we did it but only if taxi wgt was less than 160,000 lbs...(MGTOW of some of our 727's was 191,000)
It is always a physics vs cost over-ridden by safety
Sometimes good piloting, sometimes foolish...
I have flown two types where power-backs were both approved in the FCOM and allowed by SOP. Other SOPs that I have operated with permitted one engine shut down during taxy-in and my current four engine type allows two engine shut down - but the engines that run the hydraulics must be kept running until brakes are parked. This is called CDF (common dog f...).
I have never flown a type where coasting with all engines off was permitted. Doing this is called a CLM (career limiting move).
I have never flown a type where coasting with all engines off was permitted. Doing this is called a CLM (career limiting move).
Ok, let me put this in CAPTIALS so you guys can read it.
I HAVE NEVER DONE OR NEVER WILL "COAST IN " TO THE STAND. I DON'T CONDONE THE PRACTICE AS I AGREE IF SOMETHING GOES WRONG YOU WILL BE IN A SPOT OF BOTHER OPERATING OUTSIDE SOP's
ALL I'VE SAID IS THAT IT HAS BEEN DONE MANY TIMES IN 40 YEARS IN "SUITABLE " CIRCUMSTANCES WITHOUT INCIDENT THAT I'M AWARE OF.
Ok??
I HAVE NEVER DONE OR NEVER WILL "COAST IN " TO THE STAND. I DON'T CONDONE THE PRACTICE AS I AGREE IF SOMETHING GOES WRONG YOU WILL BE IN A SPOT OF BOTHER OPERATING OUTSIDE SOP's
ALL I'VE SAID IS THAT IT HAS BEEN DONE MANY TIMES IN 40 YEARS IN "SUITABLE " CIRCUMSTANCES WITHOUT INCIDENT THAT I'M AWARE OF.
Ok??
Last edited by nitpicker330; 29th Aug 2013 at 08:24.
Trackdiamond:-----don't forget to add the Earthquake occurring at the same time you enter the stand or the piece of space junk re-entering the atmosphere and then hitting you as you pull in to the stand as well as a sneezing fit...!!
Anymore scenarios you'd like to think about????!!!
Anymore scenarios you'd like to think about????!!!
Last edited by nitpicker330; 29th Aug 2013 at 08:25.
No, you actually said more than just that:-
You also said the accumulator gave you 8 applications of the brakes, but then you changed that to 6.
When you're in a hole.... stop digging !
1/ I haven't ever done it and won't
2/ I never suggested being daft and doing it in a wide body entering a confined area to an Aerobridge!!
3/ for smaller 737 ops in quiet open un-congested aprons ( with steps ) with a serviceable RUNNING APU I don't particularly see the serious problem if you cut both 60' before the stop point.
Silly and pointless? Maybe..........Dangerous? No.
2/ I never suggested being daft and doing it in a wide body entering a confined area to an Aerobridge!!
3/ for smaller 737 ops in quiet open un-congested aprons ( with steps ) with a serviceable RUNNING APU I don't particularly see the serious problem if you cut both 60' before the stop point.
Silly and pointless? Maybe..........Dangerous? No.
When you're in a hole.... stop digging !
Haven't flown the 737 for 20 years so sorry if I changed the accumulator from 8 to 6 after I researched the books. You must have been bloody quick as I changed it no more than 5 mins later!!!
My opinions haven't changed and I think I've been pretty consistant throughout, pity some here can't read.
My opinions haven't changed and I think I've been pretty consistant throughout, pity some here can't read.
Join Date: Apr 2008
Location: A tropical island.
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Coasting into the gate is a dumb idea at best. Never do it myself (and I'm usually a gung ho type), apart from fooling around in the sim, and in that case I shut the engines down when clearing on the high speed at 80 knots to see if I can make it to the gate.
Can it be done? Yes, absolutely, but you leave yourself potentially one failure away from no steering or brakes.
Also, the tools bragging about the accumulator, what's your recourse when the leak is in the brakes themselves, or a return line (has happened to me). On the 727 we at least have pneumatic brakes.
Additionally, when doing single engine taxi I strongly advise to keep the engine which pressurizes the HYD system on which the NWS is to be the last one shut down after a complete stop.
Can it be done? Yes, absolutely, but you leave yourself potentially one failure away from no steering or brakes.
Also, the tools bragging about the accumulator, what's your recourse when the leak is in the brakes themselves, or a return line (has happened to me). On the 727 we at least have pneumatic brakes.
Additionally, when doing single engine taxi I strongly advise to keep the engine which pressurizes the HYD system on which the NWS is to be the last one shut down after a complete stop.
Join Date: Mar 2009
Location: UK
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
However I really would like to know if this is something that has been suggested within the airline to save fuel and time. Further to this, the same low cost airline only uses 1 minute cool down time for its engines rather than the Boeing time of 3 mins - sad I know but I've timed it!
The company also uses a 3 minute cool down period in it's SOPs as per the Boeing recommendation, one of the considerations for single engine taxi. So again. Sounds like people operating in their own fashion.