Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Just 1 Question..


Notices
Tech Log The very best in practical technical discussion on the web

Just 1 Question..

Old 3rd May 2008 | 15:52
  #1 (permalink)  
Thread Starter
 
Joined: Apr 2008
Posts: 6
Likes: 0
From: Cork
Just 1 Question..

hi guys 1 quick question.. just did a ppl theory exam.. theres a question we couldnt figure out. which type of flap creates the biggest pitch change?? any body know the correct answer for sure??
johnodonovan is offline  
Reply
Old 3rd May 2008 | 16:49
  #2 (permalink)  
airfoilmod
Guest
 
Posts: n/a
Trick Question?

The one that's the most effective at its job?
 
Reply
Old 3rd May 2008 | 17:22
  #3 (permalink)  
 
Joined: May 2002
Posts: 102
Likes: 0
From: Ocean
Me think its a double slotted Fowler flaps
Joe Monsoon is offline  
Reply
Old 3rd May 2008 | 17:52
  #4 (permalink)  
 
Joined: Feb 2008
Posts: 210
Likes: 0
From: Standby...call you back..
For me,

this will be the type whitch in addition of increasing the camber line will also increase the wing surface...
roljoe is offline  
Reply
Old 3rd May 2008 | 17:59
  #5 (permalink)  
15 Anniversary
 
Joined: Feb 2007
Posts: 114
Likes: 0
From: Planet Earth
I fail to see how that is an important question for a PPL... at least, I never thought about it when flying...
PA38-Pilot is offline  
Reply
Old 3rd May 2008 | 22:18
  #6 (permalink)  
 
Joined: Oct 2005
Posts: 3,218
Likes: 2
From: USA
It's a bad question, because the answer depends entirely on the aircraft. Some flap systems cause pitch changes up with X amount of flap deflection, then pitch down with the next amount of flap deflection, etc. Others no change, others great change, and others it varies considerably with the CG. It's entirely airplane model-dependent, rather than one type of flap system vs. another.
SNS3Guppy is offline  
Reply
Old 3rd May 2008 | 22:32
  #7 (permalink)  
airfoilmod
Guest
 
Posts: n/a
Guppy

Except in a Piper, when extension of flaps accomplishes nothing at all. Badly attached wing surface, actually.
 
Reply
Old 4th May 2008 | 06:18
  #8 (permalink)  
Thread Starter
 
Joined: Apr 2008
Posts: 6
Likes: 0
From: Cork
hi

thanks for reply to thead guys.. but it is a valid jaa ppl question and i said fowler but even my instructors dont know... horrific..
johnodonovan is offline  
Reply
Old 4th May 2008 | 23:18
  #9 (permalink)  
 
Joined: Mar 2000
Posts: 8,571
Likes: 3
From: Arizona USA
The proper answer is...split trailing edge, under normal circumstances.
Ala, DC3 and many twin Cessna aircraft.
411A is offline  
Reply
Old 5th May 2008 | 03:12
  #10 (permalink)  
 
Joined: Mar 1999
Posts: 220
Likes: 0
From: KDEN
Given the same surface area and deflection, a fowler would be my guess, though I'm treading upon unstable ground disagreeing with 411. With the rearward translation of the surface it seems that would give your surface more arm, thus a greater net change in center of pressure. Apples to oranges of course, but I found the pitch change with flap extension to be more objectionable in Cessna singles (fowler) than Cessna twins (split).

Standing by to be corrected.
Cardinal is offline  
Reply
Old 5th May 2008 | 06:51
  #11 (permalink)  
jxk
 
Joined: Apr 2008
Posts: 555
Likes: 0
From: Cilboldentune, Britannia
I thought the reason for a change of pitch when deploying the flaps was because of the change of airflow over the horizontal stabiliser NOT the change of C of P etc..
jxk is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.