Just 1 Question..
 

hi guys 1 quick question.. just did a ppl theory exam.. theres a question we couldnt figure out. which type of flap creates the biggest pitch change?? any body know the correct answer for sure??

Trick Question?
 

The one that's the most effective at its job?

Me think its a double slotted Fowler flaps :confused:

For me,

this will be the type whitch in addition of increasing the camber line will also increase the wing surface...

I fail to see how that is an important question for a PPL... at least, I never thought about it when flying...

It's a bad question, because the answer depends entirely on the aircraft. Some flap systems cause pitch changes up with X amount of flap deflection, then pitch down with the next amount of flap deflection, etc. Others no change, others great change, and others it varies considerably with the CG. It's entirely airplane model-dependent, rather than one type of flap system vs. another.

Guppy
 

Except in a Piper, when extension of flaps accomplishes nothing at all. Badly attached wing surface, actually.

hi
 

thanks for reply to thead guys.. but it is a valid jaa ppl question and i said fowler but even my instructors dont know... horrific..

The proper answer is...split trailing edge, under normal circumstances.
Ala, DC3 and many twin Cessna aircraft.

Given the same surface area and deflection, a fowler would be my guess, though I'm treading upon unstable ground disagreeing with 411. With the rearward translation of the surface it seems that would give your surface more arm, thus a greater net change in center of pressure. Apples to oranges of course, but I found the pitch change with flap extension to be more objectionable in Cessna singles (fowler) than Cessna twins (split).

Standing by to be corrected.

I thought the reason for a change of pitch when deploying the flaps was because of the change of airflow over the horizontal stabiliser NOT the change of C of P etc..