Skidding On Brakes and Full Throttle From Static
Thread Starter
Joined: Jan 2024
Posts: 5
Likes: 0
From: Australia
Skidding On Brakes and Full Throttle From Static
Hi all, amateur sim pilot here (X-Plane). I've been playing with a payware C172S model recently and noticed that the aircraft skids quite easily with brakes applied (toe or parking) when the throttle is above 2000 RPM from static. My question is, is this realistic? Does the 172S produce enough thrust to force the aircraft to skid along in real life?
My own personal GA experience has been limited to Piper and Diamond trainers mostly as a passenger. Neither of them skid when under brakes, as far as I noticed. I asked other pilots and some said that the C182 can skid forward when braked and from static.
Keen to know your thought. Cheers,
My own personal GA experience has been limited to Piper and Diamond trainers mostly as a passenger. Neither of them skid when under brakes, as far as I noticed. I asked other pilots and some said that the C182 can skid forward when braked and from static.
Keen to know your thought. Cheers,


Joined: Jan 2019
Aviation Qualifications: LAME
Posts: 803
Likes: 642
From: Cumbria
Not a pilot, but retired Licensed Engineer with Cessna Rating, amongst others. Never had slippage on the footbrakes at max power/static.
Parking brake; depends. Efficiency varies from aircraft to aircraft, depends how well it's set up. Theoretically, it should match the toe-brakes, but personally I would only trust it to temporarily hold a parked aircraft.
Parking brake; depends. Efficiency varies from aircraft to aircraft, depends how well it's set up. Theoretically, it should match the toe-brakes, but personally I would only trust it to temporarily hold a parked aircraft.

Joined: Jan 2005
Aviation Qualifications: ATPL
Posts: 303
Likes: 6
From: NA
This behaviour that you mention is not representative of any aircraft I have flown.
I use Xplane 11 with the default C172. While the flight characteristics seem reasonable, the ground handling, both rudder pedal steering and braking is poorly modelled. This is a BATD (FAA certification) and by definition not expected to be entirely accurate.
Enjoy the flying and don’t stress the minor details!
I use Xplane 11 with the default C172. While the flight characteristics seem reasonable, the ground handling, both rudder pedal steering and braking is poorly modelled. This is a BATD (FAA certification) and by definition not expected to be entirely accurate.
Enjoy the flying and don’t stress the minor details!
Thread Starter
Joined: Jan 2024
Posts: 5
Likes: 0
From: Australia
Not a pilot, but retired Licensed Engineer with Cessna Rating, amongst others. Never had slippage on the footbrakes at max power/static.
Parking brake; depends. Efficiency varies from aircraft to aircraft, depends how well it's set up. Theoretically, it should match the toe-brakes, but personally I would only trust it to temporarily hold a parked aircraft.
Parking brake; depends. Efficiency varies from aircraft to aircraft, depends how well it's set up. Theoretically, it should match the toe-brakes, but personally I would only trust it to temporarily hold a parked aircraft.
This behaviour that you mention is not representative of any aircraft I have flown.
I use Xplane 11 with the default C172. While the flight characteristics seem reasonable, the ground handling, both rudder pedal steering and braking is poorly modelled. This is a BATD (FAA certification) and by definition not expected to be entirely accurate.
Enjoy the flying and don’t stress the minor details!
I use Xplane 11 with the default C172. While the flight characteristics seem reasonable, the ground handling, both rudder pedal steering and braking is poorly modelled. This is a BATD (FAA certification) and by definition not expected to be entirely accurate.
Enjoy the flying and don’t stress the minor details!
. Also, I can afford to fly a sim, but not a real aircraft.





