Alouette Tail Rotor cable
Thread Starter
Joined: Dec 2010
Posts: 79
Likes: 0
From: Hiding in the Rockies
Alouette Tail Rotor cable
I'm trying to locate the part number for the aft tail rotor control cable for an Alouette II SE-3130. Also trying to locate the part.
Any assistance would be very much appreciated.
Any assistance would be very much appreciated.
Joined: May 2001
Posts: 1,691
Likes: 3
From: Escrick York england
there a few
original 3130
3130s88-10-100 cable RH
3130s88-10-150 cable LH
3130s88-10-040 cable tail boom
there is also a few mods 2065 and 2138 and 2188 which have slightly different cables
the British military used the mod cables
steve
original 3130
3130s88-10-100 cable RH
3130s88-10-150 cable LH
3130s88-10-040 cable tail boom
there is also a few mods 2065 and 2138 and 2188 which have slightly different cables
the British military used the mod cables
steve
Last edited by md 600 driver; 20th March 2020 at 20:49.
Joined: May 2001
Posts: 1,691
Likes: 3
From: Escrick York england
Joined: Dec 2005
Posts: 1,581
Likes: 73
From: England
Another possibilty is
About Us | Bruntons Aero Products
At one time there were issues with Bell 47 cables in that the standard cables did not fit aircraft built in Europe (Westland/Agusta).
We had cables made up and although a long time ago I think it was these guys.
They might have a solution.
About Us | Bruntons Aero Products
At one time there were issues with Bell 47 cables in that the standard cables did not fit aircraft built in Europe (Westland/Agusta).
We had cables made up and although a long time ago I think it was these guys.
They might have a solution.
Joined: May 2001
Posts: 1,691
Likes: 3
From: Escrick York england
Just a update on numbers
3130s8810100 has been superseded with 3130s8810 30 and -1 and -02 this is the righ hand cable
3130s8810150 has been superseded with 3130s8810 20 and -1 and -02 this is the left hand cable
3130s8810040 has been superseded with 3130s8810 40 and -1 and -02 this is the rear cable or tail boom
I do have some left and right cables if needed
3130s8810100 has been superseded with 3130s8810 30 and -1 and -02 this is the righ hand cable
3130s8810150 has been superseded with 3130s8810 20 and -1 and -02 this is the left hand cable
3130s8810040 has been superseded with 3130s8810 40 and -1 and -02 this is the rear cable or tail boom
I do have some left and right cables if needed
Thread Starter
Joined: Dec 2010
Posts: 79
Likes: 0
From: Hiding in the Rockies
While scrounging around my parts inventory I located a new Lama aft cable 315A-88-00-010. Does anyone know the difference in the Alouette II cable and the Lama?
Also when they started changing the last dash-number (-1, -02, etc.) what were the changes made to the cables? Seems to be a lot of knowledge here I may as well get educated as well.
Thanks
Also when they started changing the last dash-number (-1, -02, etc.) what were the changes made to the cables? Seems to be a lot of knowledge here I may as well get educated as well.
Thanks
Joined: May 2001
Posts: 1,691
Likes: 3
From: Escrick York england
While scrounging around my parts inventory I located a new Lama aft cable 315A-88-00-010. Does anyone know the difference in the Alouette II cable and the Lama?
Also when they started changing the last dash-number (-1, -02, etc.) what were the changes made to the cables? Seems to be a lot of knowledge here I may as well get educated as well.
Thanks
Also when they started changing the last dash-number (-1, -02, etc.) what were the changes made to the cables? Seems to be a lot of knowledge here I may as well get educated as well.
Thanks
I believe the modified alou 11 cables were upgrades and all types still fit
don’t you have the removed cable you could try to see if the same length and specification
