Alouette Tail Rotor cable
 

I'm trying to locate the part number for the aft tail rotor control cable for an Alouette II SE-3130. Also trying to locate the part.
Any assistance would be very much appreciated.

there a few
original 3130
3130s88-10-100 cable RH
3130s88-10-150 cable LH
3130s88-10-040 cable tail boom

there is also a few mods 2065 and 2138 and 2188 which have slightly different cables
the British military used the mod cables

steve

Yes! That's what I needed to start my search. Thanks md 600 driver

I have been asked 3 times for These cables since your post asking about part numbers I only have one type left now

Another possibilty is

About Us | Bruntons Aero Products

At one time there were issues with Bell 47 cables in that the standard cables did not fit aircraft built in Europe (Westland/Agusta).
We had cables made up and although a long time ago I think it was these guys.
They might have a solution.

Just a update on numbers

3130s8810100 has been superseded with 3130s8810 30 and -1 and -02 this is the righ hand cable

3130s8810150 has been superseded with 3130s8810 20 and -1 and -02 this is the left hand cable

3130s8810040 has been superseded with 3130s8810 40 and -1 and -02 this is the rear cable or tail boom

I do have some left and right cables if needed

While scrounging around my parts inventory I located a new Lama aft cable 315A-88-00-010. Does anyone know the difference in the Alouette II cable and the Lama?
Also when they started changing the last dash-number (-1, -02, etc.) what were the changes made to the cables? Seems to be a lot of knowledge here I may as well get educated as well.

Thanks

the lama has a longer tail boom
I believe the modified alou 11 cables were upgrades and all types still fit
don’t you have the removed cable you could try to see if the same length and specification

Thanks for the info md600. Everyday is a learning experience but I'm enjoying it. My cable is still serviceable. I'm just trying to stay ahead of the game.