Wikiposts
Search
Computer/Internet Issues & Troubleshooting Anyone with questions about the terribly complex world of computers or the internet should try here. NOT FOR REPORTING ISSUES WITH PPRuNe FORUMS! Please use the subforum "PPRuNe Problems or Queries."

Scandisc

Thread Tools
 
Search this Thread
 
Old 17th Jun 2001, 19:06
  #1 (permalink)  
roach
Guest
 
Posts: n/a
Post Scandisc

Could someone please tell me what needs to be shut down to run a thorough scandisc. When I try it, many hours later, my system gives up because it says it is being interupted. Thank you in advance.
 
Old 17th Jun 2001, 19:24
  #2 (permalink)  
touch&go
Guest
 
Posts: n/a
Post

Use Ctrl Alt Del and shut down everything except explorer, I do this and it does the scan in about 30 minutes,
 
Old 17th Jun 2001, 20:36
  #3 (permalink)  
ShyTorque
Guest
 
Posts: n/a
Post

Make sure your screen saver is set to "none".
 
Old 17th Jun 2001, 20:46
  #4 (permalink)  
fobotcso
Guest
 
Posts: n/a
Red face

You must leave "Systray" as well as "Explorer" running to keep Windows running properly.

Check the following document in Microsoft Knowledge Base: PSS ID Number: Q222469. (Just type Q222469 into the Google search box and the document comes up as first of four "finds").
 
Old 18th Jun 2001, 13:31
  #5 (permalink)  
lame
Guest
 
Posts: n/a
Question

I take it you are talking about defragmenting? If not, does the same apply?

I have no problem with Scandisc but Defragmenting sometimes takes MANY MANY hours, because it keeps saying "drives contents has changed".


------------------
"I USED to be a PPRuNaholic, but now I'm CURED"
 
Old 18th Jun 2001, 19:45
  #6 (permalink)  
ExSimGuy
Guest
 
Posts: n/a
Thumbs up

Yep, same with defrag - otherwise the defrag program restarts every time you get a change of data on the disk drive.
 
Old 18th Jun 2001, 23:52
  #7 (permalink)  
WhiteSail
Guest
 
Posts: n/a
Post

When you boot up and just before you get the message "starting windows" hit F8.

This will enable you to start in "safe mode" (select it from the options).

Windows will only load essential drivers and de-fragging and scandisk will become a lot quicker.

This proceedure avoids trying to work out what you have running in the background.
 
Old 19th Jun 2001, 01:28
  #8 (permalink)  
lame
Guest
 
Posts: n/a
Smile

Thank you very much, will try that next time, save me wanting to



Best regards,

"lame"


------------------
"I USED to be a PPRuNaholic, but now I'm CURED"
 
Old 19th Jun 2001, 16:15
  #9 (permalink)  
johntrav69
Guest
 
Posts: n/a
Thumbs up

http://www.jermar.com/products.htm

Has a program called tweakui which will allow you to setup a defrag on boot before all drivers load which is the quickest and easiest solution. Oh and it does a lot more besides! Shareware I think.
 
Old 19th Jun 2001, 17:49
  #10 (permalink)  
aisleman
Guest
 
Posts: n/a
Lightbulb

Disabling the anti-virus usually speeds scandisk and defrag up considerably - especially if it is set to monitor in the background.

Depending on the flavour of AV u have, you need to right click on its icon in the systray (bottom right of desktop) or kill it via the task manager (ctrt+alt+del).

I read somewhere that tweakui was written by the Microsoft gurus who developed Windows - either as an after-thought, or because it contains facilities which weren't allowed to be in the official version of Windows - depends which story you believe.


Cheers
aisleman

or is it ctrl+alt+shoot? :smile:
 
Old 20th Jun 2001, 00:41
  #11 (permalink)  
WhiteSail
Guest
 
Posts: n/a
Post

Lame, I love the cartoon; chuckled for ages!!
:-)

[This message has been edited by WhiteSail (edited 19 June 2001).]
 
Old 20th Jun 2001, 02:04
  #12 (permalink)  
lame
Guest
 
Posts: n/a
Wink

Thank you.....

Trouble is shortly after that you get





And then sadly you can no longer






------------------
"I USED to be a PPRuNaholic, but now I'm CURED"
 
Old 28th Jun 2001, 18:42
  #13 (permalink)  
Wirraway
Guest
 
Posts: n/a
Post

<IMG SRC="http://www.stopstart.fsnet.co.uk/smilie/guin.gif">



[This message has been edited by Wirraway (edited 28 June 2001).]

[This message has been edited by Wirraway (edited 28 June 2001).]
 
Old 29th Jun 2001, 00:51
  #14 (permalink)  
spannersatcx
Guest
 
Posts: n/a
Post

Is that what you meant Wirraway
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.