CD Rewriter problems
Thread Starter
Join Date: Sep 2001
Location: South East England
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
CD Rewriter problems
I've just fitted a CD Rewriter in my machine (Make is LG No GCE-8160B).I've set it up as master with orignal CD Rom as slave, works ok unless media Player 7.1 is started and then it immediatly freezes the computer and I have to reboot, I am using Windows 98 second edition, have 128 ram, if you have any ideas people I would be very grateful otherwise I will have to return it to shop. cheers Victor . . <img src="confused.gif" border="0">
Join Date: Oct 1998
Location: UK
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
The Windows Media Player is known for a bug in it's encoding...does not appear to happen with all CD players. . .Even CNET reports this <a href="http://www.cnet.com/software/0-3227895-8-6386888-1.html" target="_blank"> here </a> . Download another software and only if this also shows the same problem than consider your new toy as being faulty. . .On the link provided you find links to other acceptable software.
Thread Starter
Join Date: Sep 2001
Location: South East England
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info folks, both cd rom and cdrw are on the secondary IDE, I have tried master/slave and vice versa, also set it up on the hard drive as slave no different,have just unpluged the cd rom and there are no problems, it only crashes if both cds are connected and just to make it more odd, by trying the cdrw on its own it proves that the cdrw is not at fault. Heellllp.. . <img src="confused.gif" border="0"> <img src="confused.gif" border="0"> <img src="confused.gif" border="0">
Join Date: Dec 2000
Location: UK
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Ummm....didn't think you could make the Hard disk a slave (well the c: drive anyway)
Have you tried the following:
IDE1 : hard disk master, CDROM as slave. .IDE2: CDRW as master as single device on that channel?
FS
Have you tried the following:
IDE1 : hard disk master, CDROM as slave. .IDE2: CDRW as master as single device on that channel?
FS
Thread Starter
Join Date: Sep 2001
Location: South East England
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Sorry Flyswift, Its the way I worded it,I didnt mean the hard disc as slave I meant the CDRW as slave and the hard disc as master on IDE1.. .I've tried the hard disc master and CDRW as slave but not the CDROM as slave to the hard disc on IDE1, I will give it a go. . .Cheers I will let you know. . . <img src="confused.gif" border="0"> . .Blimey I'm confusing myself now.
[ 05 February 2002: Message edited by: Victor Meldrew ]</p>
[ 05 February 2002: Message edited by: Victor Meldrew ]</p>
Join Date: Mar 2000
Location: UK
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Heres an interesting angle on it for you.. .I had a similar problem whenever I wanted to burn CD's the system would crash halfway rendering the CD unusable.. .I spent a fortune in CD's trying to rectify the problem.. .I reloaded windows, Refromated then reloaded windows, uninstalled then reinstalled the CD on its own and nothing worked. Then finally I removed the memory sticks and replaced them. Problem solved.. .Go figure.
Thread Starter
Join Date: Sep 2001
Location: South East England
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Well people,. .I'm afraid it's beaten me, tried everything you advised except changing the memory, no joy so have taken it back to retailer, perhaps I will try again with another make.. .Thanks again for trying, Victor <img src="frown.gif" border="0">