Model aircraft kits
Thread Starter
Join Date: Jul 2002
Location: Nearest Bombardier AMO
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Model aircraft kits
Greetings, all!
Just curious, here. Any other ppruners interested in plastic kits? Recently rediscovered one of my childhood hobbies and am finding it extremely addictive. 1:48, WW2 and as much superdetail as I can handle. Cool bananas.
Happy landings
Bug
Just curious, here. Any other ppruners interested in plastic kits? Recently rediscovered one of my childhood hobbies and am finding it extremely addictive. 1:48, WW2 and as much superdetail as I can handle. Cool bananas.
Happy landings
Bug
Join Date: Oct 2003
Location: near Edinburgh, Scotland
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
I've been known to dabble somewhat! 1/72nd mainly, and a helluva lot of Spitfires and Me109s usually!!
If I could get a photo of the bedroom ceiling, you'd see what I meant!
If I could get a photo of the bedroom ceiling, you'd see what I meant!
Join Date: Feb 2002
Location: Inverness-shire
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
I used to think that I could run up a reasonable kit (still got a Tamiya Swordfish part done) - but when you see the incredible standards of super detailing that some people can achieve, even at 1/72 it's very depressing
Iconoclast
Join Date: Sep 2000
Location: The home of Dudley Dooright-Where the lead dog is the only one that gets a change of scenery.
Posts: 2,132
Likes: 0
Received 0 Likes
on
0 Posts
Models. I have lost count.
The last model I built was a SE-5 large scale and that was in 1952. Since 1988 I have been able to purchase ready built models from the manufacturers or agencies that sell manufacturers models. I had a part time business selling models so I could get them at a reduced price. The models run from 1:100 military models to 1:48 military. 1:40 civil models. 1:144 commercial models to 1:100 commercial models. I have four military models in 1:18 scale and two custom built military models in 1:16 scale. I have lost count as to how many I have but I suspect it is well over 300.
My collection of helicopter models would drive the guys on Rotorheads wild with envy.
My collection of helicopter models would drive the guys on Rotorheads wild with envy.
Thread Starter
Join Date: Jul 2002
Location: Nearest Bombardier AMO
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Oh, just more general waffle..
As a kid I tried my hand at rudimentary dioramas featuring aircraft in centre-stage, however seeing as my attention span then was even less than it is now (roughly equal to that of the rare bearded desert-gnat), these projects tended to lose impetus as they progressed, or to peter out entirely. Trying to finish up some of my ideas from back then.
Also used to fiddle about with basic r/c models for a while. Astir 8, you'll appreciate this: got started as a glider pilot as a teenager and those of us into r/c would chuck our homebuilt 2 or 3 channel gliders into the back of our clubs' glider trailers when heading out into the 'bush' on long gliding camps. SF-34, Libelle, ASK-13 (THAT trailer was useless as a model-transport, all those cross-braces!), Blaniks and Phoebus. (old kit I know but, hey, this was in Africa and to us the aircraft were hi-tech! : ) When the days' soaring was done or when all aircraft were out cross-country, we'd launch a glider model and try to thermal with it. Great fun! One of my sidekicks actually became very good at it. I stank but the prangs were spectacular!
I digress. Am tempted to build some of the more unusual, read larger, types in 1:48 but it seems these models can often only be purchased in resin. Apparently these kits are not only difficult to construct but also exhibit an alarming tendency to sag after being on display for a while!?
Any hints?
Also used to fiddle about with basic r/c models for a while. Astir 8, you'll appreciate this: got started as a glider pilot as a teenager and those of us into r/c would chuck our homebuilt 2 or 3 channel gliders into the back of our clubs' glider trailers when heading out into the 'bush' on long gliding camps. SF-34, Libelle, ASK-13 (THAT trailer was useless as a model-transport, all those cross-braces!), Blaniks and Phoebus. (old kit I know but, hey, this was in Africa and to us the aircraft were hi-tech! : ) When the days' soaring was done or when all aircraft were out cross-country, we'd launch a glider model and try to thermal with it. Great fun! One of my sidekicks actually became very good at it. I stank but the prangs were spectacular!
I digress. Am tempted to build some of the more unusual, read larger, types in 1:48 but it seems these models can often only be purchased in resin. Apparently these kits are not only difficult to construct but also exhibit an alarming tendency to sag after being on display for a while!?
Any hints?
I began building models as a kid, then gave it up and then got back into it again after I retired. I build 1:48 commercial aircraft almost exclusively since I was never in the military and since I find 1:72 a little too small for the detail I like to include.
Here's a few of my offerings
http://www.ipmscanada.com/models/jco...urtmodels.html
The kit of the black and yellow Norseman was actually given me by Robert Noorduyn Jr. the son of the designer of the aircraft.
Here's a few of my offerings
http://www.ipmscanada.com/models/jco...urtmodels.html
The kit of the black and yellow Norseman was actually given me by Robert Noorduyn Jr. the son of the designer of the aircraft.
Iconoclast
Join Date: Sep 2000
Location: The home of Dudley Dooright-Where the lead dog is the only one that gets a change of scenery.
Posts: 2,132
Likes: 0
Received 0 Likes
on
0 Posts
Among other things....
About the time I built the SE-5 I also built five or six smaller models. The wings were preformed and the under sides were to be covered in model tissue. The fuselages also had parts that were to be covered with tissue as well. In stead of using model tissue I undercut those areas to be covered with tissue and covered those areas with 1:32nd balsa plank. These models were super strong structural wise. When I had completed each model I would balance it out so it flew well and we would take them up in our PBY when we went out on patrol. On our return trip I would place the model in a large paper bag that had a kite cord attached to it. The pilots would put the P Boat in a sideslip and I would toss the model in the bag over the side. When the model was in undisturbed air I would yank on the cord and the model would come out of the bag. We usually did this around five thousand feet and we would follow the model down until it crashed in the Gulf of Mexico. Great sport. Almost as good as when we threw our excess flight rations over the side and watched the sharks fight over it.
PIGBOAT If you are ever in the neighborhood (Pincourt on Ile Perrot) give me a call and you can come over and check my model collection. There might even be a free meal. Your models are first class.
PIGBOAT If you are ever in the neighborhood (Pincourt on Ile Perrot) give me a call and you can come over and check my model collection. There might even be a free meal. Your models are first class.
Last edited by Lu Zuckerman; 29th Jan 2004 at 11:33.
Join Date: Feb 2002
Location: Inverness-shire
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
I was once soaring the ridge at the Long Mynd, with a K6 approaching, but safely in the distance.
Then instantly it flew straight over my head - it was a scale R/C model much much closer than the full size one would have been.
Scared me witless - still does, thinking about it!
Then instantly it flew straight over my head - it was a scale R/C model much much closer than the full size one would have been.
Scared me witless - still does, thinking about it!
Free Man, Not a Number
Join Date: Jun 2001
Location: Well here of course.
Age: 58
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
I build 144th scale stuff for my sons N gauge railway - he's got a nice military section - I'm slowly turning one end into an army camp but he's got wise and now insists that I buy him new engines and extend the track before I build any more planes. Great fun models - I can lose myself for hours in them.
Thanks Lu, I shall certainly take you up on the offer the next time I'm in UL. My daughter lives in Montreal West so we visit a couple of times a year. We were there for Christmas, but the driving conditions were so terrible we went nowhere.
I believe you mentioned that you haven't a model of the PBY. Drop me an e-mail and maybe we can work something out.
I referred to Robert Noorduyn Jr. earlier. I've just found out he suffered a nasty accident on Monday. He slipped on some ice and fell and broke an ankle. He's going to be in a cast for six weeks. Bob was 82 in November.
I believe you mentioned that you haven't a model of the PBY. Drop me an e-mail and maybe we can work something out.
I referred to Robert Noorduyn Jr. earlier. I've just found out he suffered a nasty accident on Monday. He slipped on some ice and fell and broke an ankle. He's going to be in a cast for six weeks. Bob was 82 in November.
Pigboat
Thankyou, thankyou, thankyou. You, sir, are an inspiration.
As a youngster during school holidays I used to churn out 4 to 5 detailed 1/72 models a week and then work on larger projects instead of doing homework during term. Most got scrapped when I left home but a 1/48 Spitfire Vc, 1/48 Mosquito and 1/72 Sunderland were still gracing the local flying club a few years later.
Unfortunately, #1 son went straight into RTF R/C models and #2 son prefers FS2003 so I'd lost the memory of the satisfaction to be gained from crafting a fine model.
This'll make Mrs Cooda very happy as she's already hinting that she doesn't want me lying about the place and getting under her feet when I eventually retire.
Thankyou, thankyou, thankyou. You, sir, are an inspiration.
As a youngster during school holidays I used to churn out 4 to 5 detailed 1/72 models a week and then work on larger projects instead of doing homework during term. Most got scrapped when I left home but a 1/48 Spitfire Vc, 1/48 Mosquito and 1/72 Sunderland were still gracing the local flying club a few years later.
Unfortunately, #1 son went straight into RTF R/C models and #2 son prefers FS2003 so I'd lost the memory of the satisfaction to be gained from crafting a fine model.
This'll make Mrs Cooda very happy as she's already hinting that she doesn't want me lying about the place and getting under her feet when I eventually retire.
Mostly Harmless
Join Date: Nov 1999
Location: Oz (cold & wet bit)
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Love 'em. Have been building mostly science fiction stuff for a while (fair cross section of the empire and federation hanging in my hall now) but still plenty of aircraft around the house. I'm not anal enuf to be into super-detailing.
Am scratch-building a 1:72 scale Cozy at the moment, but my eyes are hurting...
Am scratch-building a 1:72 scale Cozy at the moment, but my eyes are hurting...
Join Date: Aug 2000
Location: formally Alamo battleground, now the crocodile with palm trees!
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
wow pigboat, very impressive!! 
I remember my first plastic model, a 1/48 Mig-25. I havenīt built models for a long time, but Iīd like to get back into it, especially into Luftwaffe WW2 models (Ar 234, Do335, Fw200, He266, drawing board planes etc.). One thing I was not good at was colouring the models. I never figured it out ...
7 7 7 7
I remember my first plastic model, a 1/48 Mig-25. I havenīt built models for a long time, but Iīd like to get back into it, especially into Luftwaffe WW2 models (Ar 234, Do335, Fw200, He266, drawing board planes etc.). One thing I was not good at was colouring the models. I never figured it out ...
7 7 7 7
Thanks guys.
Cooda, since half the battle after retirement is keeping Mrs. piggy - or Mrs. Cooda in your case - happy, I consider my job well done.
Down side is, women don't like the smell of paint unless it's being applied to the walls. I don't have a painting booth so I've been banished to the garden shed which means it's too cold to paint for six months of the year. You of course would not have that problem.
Squawk, I'd suggest getting yourself an inexpensive airbrush. You can get Testors airbrush kit at Wal-Mart for less than $50.00. It comes with a single action airbrush, a can of propellant and a good instruction booklet. Buy one and whale away. With acrylic paint there are no petro based solvents, just plain water for thinning and cleanup.
If you're looking for some rare models, try this
http://www.cahood.com/ and for tools and stuff
http://www.micromark.com/
They're both in the US, but they ship anywhere.
Cooda, since half the battle after retirement is keeping Mrs. piggy - or Mrs. Cooda in your case - happy, I consider my job well done.
Down side is, women don't like the smell of paint unless it's being applied to the walls. I don't have a painting booth so I've been banished to the garden shed which means it's too cold to paint for six months of the year. You of course would not have that problem.
Squawk, I'd suggest getting yourself an inexpensive airbrush. You can get Testors airbrush kit at Wal-Mart for less than $50.00. It comes with a single action airbrush, a can of propellant and a good instruction booklet. Buy one and whale away. With acrylic paint there are no petro based solvents, just plain water for thinning and cleanup.
If you're looking for some rare models, try this
http://www.cahood.com/ and for tools and stuff
http://www.micromark.com/
They're both in the US, but they ship anywhere.
Join Date: Mar 2002
Location: Biggleswade
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Non-smelly glues - a non-allergic cyano might help, but it'll play havoc with the clear canopies. For the latter I use RC Modellers Glue - both are available from good (Flying) Model Shops.
I started aeromodelling at the age of about 8 in the 1950's and I've yet to give it up. I build mainly indoor free flight aircraft, most of which are scale, although I have been known to venture outdoors from time-to-time.
Solid wise, I'm trying to collect kits of all the aircraft I've flown to give me something to do when I finally retire, but some of the types are proving illusive in my preferred scale (1/48th) - Caravelle, CAP10 and Cessna 172 are three that are illuding me at the moment.
Recent builds include a Keil Kraft Achillese, Piper Family Cruiser and Aeronca Champ for free flight. Plus a Tamiya 1/48th Spifire V in plastic for no 4 daughter, who is mad on Airbedanes!
I started aeromodelling at the age of about 8 in the 1950's and I've yet to give it up. I build mainly indoor free flight aircraft, most of which are scale, although I have been known to venture outdoors from time-to-time.
Solid wise, I'm trying to collect kits of all the aircraft I've flown to give me something to do when I finally retire, but some of the types are proving illusive in my preferred scale (1/48th) - Caravelle, CAP10 and Cessna 172 are three that are illuding me at the moment.
Recent builds include a Keil Kraft Achillese, Piper Family Cruiser and Aeronca Champ for free flight. Plus a Tamiya 1/48th Spifire V in plastic for no 4 daughter, who is mad on Airbedanes!
Join Date: Oct 2001
Location: LHR
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
"and how DO you glue two fuselage halves together neatly??"
You clean up the two halves so they fit together as neatly as possible.
Assemble them together dry and press some sticky tape (Scotch Magic Tape is good) firmly around the join lengthwise, which will hold the two sides together.
Next, split the tape along the join with a sharp knife (Swann Morton scalpel is best).
This gives you two halves nicely masked so should the glue ooze out of the join, it'll end up on the tape and not on the plastic.
If all goes well this leaves only a wafer thin glue line to clean up.
I've just ordered some 1/144 Hurricane kits made by a Japanese manufacturer Sweet. Apparently, these are state of the art kits for this scale I'd love to see more 1/144 kits for the 1930-1940 period of the RAF, but don't hold out much hope as it's a somewhat specialist interest. 1/72 I'd find hard to store.
Mark.
You clean up the two halves so they fit together as neatly as possible.
Assemble them together dry and press some sticky tape (Scotch Magic Tape is good) firmly around the join lengthwise, which will hold the two sides together.
Next, split the tape along the join with a sharp knife (Swann Morton scalpel is best).
This gives you two halves nicely masked so should the glue ooze out of the join, it'll end up on the tape and not on the plastic.
If all goes well this leaves only a wafer thin glue line to clean up.
I've just ordered some 1/144 Hurricane kits made by a Japanese manufacturer Sweet. Apparently, these are state of the art kits for this scale I'd love to see more 1/144 kits for the 1930-1940 period of the RAF, but don't hold out much hope as it's a somewhat specialist interest. 1/72 I'd find hard to store.
Mark.
For gluing canopies, indeed for gluing any part that will not come under stress, ordinary white glue is fine. There's something over here made by Weldbond, called More Than a Great Glue, a kind of super white glue that works great.
Watch crystal glue is also supposed to be fine for clear parts. It's available from Micro-Mark.
Airbedane try the following for the models you're looking for. If they don't have it, it probably doesn't exist.
http://www.rare-planedetective.com
http://www.squadron.com/
Watch crystal glue is also supposed to be fine for clear parts. It's available from Micro-Mark.
Airbedane try the following for the models you're looking for. If they don't have it, it probably doesn't exist.
http://www.rare-planedetective.com
http://www.squadron.com/
Last edited by pigboat; 6th Feb 2004 at 05:40.
Join Date: Jun 2001
Location: Northants, UK
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
how DO you glue two fuselage halves together neatly?
Flat spin - some of the liquid stuff is fairly inoffensive smell-wise, particularly compared to some of the nastier tube glues.