Margate - FAMG
Join Date: Jun 2009
Location: .
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
If you can "safely" get a 900 in with 3500-3900 ft and as importantly get it out in that, balanced field length, then why are you asking? Good luck, I couldn't bring my ride in there. Well, I could get in in but couldn't get it out very easily.
Thread Starter
Join Date: Jul 2008
Location: Brasil
Age: 54
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Thank you WrldWide to share your experience.
I think I posted wrong. What I would ask is. Is the runway ok ? Any operations on that runway with any Falcon or Jets ? That's is my question.
This is not an international airport, and probably only locals land there. So, I would like to know if someone had experience on that runway.
In the other hand, I have my numbers and I know if the airplane can land and takeoff from there AND if I want to do it. Best regards.
I think I posted wrong. What I would ask is. Is the runway ok ? Any operations on that runway with any Falcon or Jets ? That's is my question.
This is not an international airport, and probably only locals land there. So, I would like to know if someone had experience on that runway.
In the other hand, I have my numbers and I know if the airplane can land and takeoff from there AND if I want to do it. Best regards.
Join Date: Dec 2004
Location: England
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
PCN vs ACN
I think that your planning should include a check of the PCN values for the runway and taxiways and compare it to the Falcon's ACN data. Is that what you were perhaps referring to?
