Space shuttle wiring
Thread Starter
Joined: May 2000
Posts: 340
Likes: 0
From: Worldwide
Space shuttle wiring
Last weeks tragic accident reminded me a little about other in-flight fires that have occoured in the past few years that have been thought to be due to arcing of the wiring looms where the Kapton insulation had become brittle and fallen off, thought to lead to arcing and fires.
The way they described the way sensors started tripping off, and temperature rise etc could be attributed heating of a loom changing resistance levels, and eventually an open circuit. An internal wing fire could lead to a significant structural failure.
Any idea what insulation is used on the space shuttle, Kapton would be about the right vintage ?
Condolances to all of the NASA family that have been affected by this tragic accident.
Z
The way they described the way sensors started tripping off, and temperature rise etc could be attributed heating of a loom changing resistance levels, and eventually an open circuit. An internal wing fire could lead to a significant structural failure.
Any idea what insulation is used on the space shuttle, Kapton would be about the right vintage ?
Condolances to all of the NASA family that have been affected by this tragic accident.
Z
Joined: May 2002
Posts: 1,704
Likes: 1
From: Who can say?
There is no evidence that I have seen that would so much as suggest that wiring problems caused the in-flight breakup of the Shuttle.
This post appears to me to be pointless speculation. As there is a wealth of other threads about this tragedy, I am closing this thread.
This post appears to me to be pointless speculation. As there is a wealth of other threads about this tragedy, I am closing this thread.
