Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Aerodata Flight Deck Performance Validity

Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

Aerodata Flight Deck Performance Validity

Thread Tools
 
Search this Thread
 
Old 28th May 2022, 03:10
  #1 (permalink)  
Thread Starter
 
Join Date: Mar 2011
Location: Earth
Posts: 172
Likes: 0
Received 0 Likes on 0 Posts
Aerodata Flight Deck Performance Validity

Hello,

I am wondering if any Aerodata FDP users can tell me if their operation imposes limits on FDP validity. For example, if a new ATIS is issued with a 3 degree increase in temperature, or a calm wind changes to a 5 knot tailwind, is a new ACARS FDP required by procedure?

The TLR (pre-filled paper performance solution that is generated hours ahead of time) does have listed validity limits: OAT must be less than or equal to planned assumed temperature and equal to or greater than planned OAT minus 10 degrees C; altimeter setting must be equal to or greater than planned altimter setting - 00.10" HG or 3.4 HPA. Additionally weight must be no greater than planned weight and no less than planned -180,000 lbs (for my operator/airframe).

However no such restriction exists on the ACARS FDP that I can find. Is FDP validity left to crew judgement at most operators, or are limits imposed? Are the TLR validity requirements equally applicable to the FDP? Thanks in advance.
RandomPerson8008 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.