A320 how to pull up landing parameters from FMGC after landing
Thread Starter
Join Date: Jan 2018
Location: Minnesota
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
A320 how to pull up landing parameters from FMGC after landing
Saw an old salt pull up a landing report that showed landing pitch anyone know the keystrokes to do this?
Join Date: Nov 2012
Location: Gran Bretaņa
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
As well as using the Alpha call ups, there are various ACMS reports which you may be able to print out. You'll probably need to ask one of your trainers or tech managers, though, as the 'keystrokes' are possibly company specific. For us, it's MCDU Menu, AIDS, Airline Functions, ACMS reports, then scroll up or down between the various reports available.
We've got both Pitch at Landing and Pitch at Takeoff reports, which show about 20 seconds of data, showing pitch, gear compression, CAS, IRS pitch rate, roll, etc. There is also a Touchdown G Report, which shows 5 seconds on either side of touchdown, with most of the above data as well as Max and Min G loads.
We've got both Pitch at Landing and Pitch at Takeoff reports, which show about 20 seconds of data, showing pitch, gear compression, CAS, IRS pitch rate, roll, etc. There is also a Touchdown G Report, which shows 5 seconds on either side of touchdown, with most of the above data as well as Max and Min G loads.
Last edited by MaydayMaydayMayday; 9th Jan 2018 at 03:01.
