A320 how to pull up landing parameters from FMGC after landing
Saw an old salt pull up a landing report that showed landing pitch anyone know the keystrokes to do this?
|
AIDS - Man reports - 15 Load Report
Or, for the touchdown G load alone, AIDS - Alpha Call Ups - VRTAMAX |
Hi Safelife,
I tried your second method but it says:” invalid input” on the scratchpad... are you sure it’s “ vrtamax”? Thanks. |
As well as using the Alpha call ups, there are various ACMS reports which you may be able to print out. You'll probably need to ask one of your trainers or tech managers, though, as the 'keystrokes' are possibly company specific. For us, it's MCDU Menu, AIDS, Airline Functions, ACMS reports, then scroll up or down between the various reports available.
We've got both Pitch at Landing and Pitch at Takeoff reports, which show about 20 seconds of data, showing pitch, gear compression, CAS, IRS pitch rate, roll, etc. There is also a Touchdown G Report, which shows 5 seconds on either side of touchdown, with most of the above data as well as Max and Min G loads. |
All times are GMT. The time now is 05:22. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.