pt62-42 engine vibration
Thread Starter
Join Date: Oct 2013
Location: india
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
pt62-42 engine vibration
hi all,
brief discribtion of the maintenance done
1. prop overhaul
2. overspeed and prop gov change
question: why the left engine is vibrating more that previously in feather condition and can be felt in cabin and cockpit. right engine is running fine.
it can be seen from outside that spinner is not rotating in liner motion.
brief discribtion of the maintenance done
1. prop overhaul
2. overspeed and prop gov change
question: why the left engine is vibrating more that previously in feather condition and can be felt in cabin and cockpit. right engine is running fine.
it can be seen from outside that spinner is not rotating in liner motion.
Join Date: Jun 2003
Location: Canada
Age: 68
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
A few questions:
1) does this "vibration" disappear once the prop is moved out of feather
2) were the props balanced once they were reinstalled
3) what is the prop rpm while in feather and the engine operating at ground idle
4) what airframe installation are we talking about
With regards to the spinner not rotating in linear motion...there is a maintenance procedure to properly position the spinner that normally rectifies that.
1) does this "vibration" disappear once the prop is moved out of feather
2) were the props balanced once they were reinstalled
3) what is the prop rpm while in feather and the engine operating at ground idle
4) what airframe installation are we talking about
With regards to the spinner not rotating in linear motion...there is a maintenance procedure to properly position the spinner that normally rectifies that.
Join Date: Jul 2013
Location: Kansas
Age: 85
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
A few questions:
1) does this "vibration" disappear once the prop is moved out of feather
2) were the props balanced once they were reinstalled
3) what is the prop rpm while in feather and the engine operating at ground idle
4) what airframe installation are we talking about
With regards to the spinner not rotating in linear motion...there is a maintenance procedure to properly position the spinner that normally rectifies that.
1) does this "vibration" disappear once the prop is moved out of feather
2) were the props balanced once they were reinstalled
3) what is the prop rpm while in feather and the engine operating at ground idle
4) what airframe installation are we talking about
With regards to the spinner not rotating in linear motion...there is a maintenance procedure to properly position the spinner that normally rectifies that.
Thread Starter
Join Date: Oct 2013
Location: india
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
hello.
sorry for the late responce
1. yes it disappears when prop move to fine position
2.yes the prop were balanced before installation
3. in feather its about 500 rpm and in ground idle its 1200
4.checked the installation of spinner and is totally fine.
sorry for the late responce
1. yes it disappears when prop move to fine position
2.yes the prop were balanced before installation
3. in feather its about 500 rpm and in ground idle its 1200
4.checked the installation of spinner and is totally fine.