Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

A320 FD recycle - touch and go

Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

A320 FD recycle - touch and go

Thread Tools
 
Search this Thread
 
Old 25th Sep 2013, 07:02
  #1 (permalink)  
Thread Starter
 
Join Date: Jan 2012
Location: Not far from the edge of the Milky Way Galaxy in the Orion Arm.
Posts: 510
Likes: 0
Received 0 Likes on 0 Posts
A320 FD recycle - touch and go

Could any Airbussy current, please have a stab at this please.


Why is the FD recycled on/off on the runway when doing Touch and Goes during base training?

Is it to put the system back into the Takeoff phase as opposed to go-around mode - and/or take it out off Landing mode?

I see I`ve probably crossed a couple of factors here.

Last edited by Natstrackalpha; 25th Sep 2013 at 07:03.
Natstrackalpha is offline  
Old 25th Sep 2013, 10:11
  #2 (permalink)  
 
Join Date: Oct 2009
Location: UK
Posts: 1,270
Likes: 0
Received 0 Likes on 0 Posts
Hi Natstrackalpha,
Simply set TOGA briefly, and FDs will reappear even if turned off,
Man TOGA, SRS.
rudderrudderrat is offline  
Old 25th Sep 2013, 13:56
  #3 (permalink)  
 
Join Date: Mar 2006
Location: Ormond Beach
Age: 49
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Touch and goes. Been a while....
flyboyike is offline  
Old 26th Sep 2013, 19:06
  #4 (permalink)  
Thread Starter
 
Join Date: Jan 2012
Location: Not far from the edge of the Milky Way Galaxy in the Orion Arm.
Posts: 510
Likes: 0
Received 0 Likes on 0 Posts
Thank you all for your answers. I appreciate them.

I was wanting to know why we re-cycle the FD - what does it do, apart from simply sw off and then back on again the FD - what does it re-set, it re-sets a lot of stuff?
Natstrackalpha is offline  
Old 26th Sep 2013, 19:26
  #5 (permalink)  
 
Join Date: Mar 2000
Location: Sunrise Senior Living
Posts: 1,338
Likes: 0
Received 0 Likes on 0 Posts
Nats - we take of with FD on and in turn downwind, switch off and put FPV on. The rest of the circuit is flown like this.
On the T&G select TOGA and FD reappears in HDG/VS (MAN TOGA/SRS/RW)
Does that help?
mcdhu is offline  
Old 27th Sep 2013, 19:39
  #6 (permalink)  
Thread Starter
 
Join Date: Jan 2012
Location: Not far from the edge of the Milky Way Galaxy in the Orion Arm.
Posts: 510
Likes: 0
Received 0 Likes on 0 Posts
Thank you all.
I was imagining it. The FD is not recycled, don`t know where I got that from, read it somewhere in training manual City. Moreover the FD is selected (scuze pun) - not recycled - when flaps 2 and Hdg/VS is selected
after F/O has set 50%......
`GO`
TOGA
`Rotate`

Also - not actually doing it yet. So no panic (for now). Thank you for your inputs. Espesh MCDU and rudderrudderrat
Natstrackalpha is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.