Distance From Waypoint for Boeing FMC Auto Sequencing
Thread Starter
Join Date: Aug 2002
Location: Under the sea
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Distance From Waypoint for Boeing FMC Auto Sequencing
Good day Gents,
Is there a published distance within which the aircraft must pass a waypoint in order for it to be auto sequenced? When approaching a waypoint I never like seeing the distance get larger.
Is there a published distance within which the aircraft must pass a waypoint in order for it to be auto sequenced? When approaching a waypoint I never like seeing the distance get larger.
The distance at which an FMS/FMC/GPS navigator sequences to the next waypoint in the flight plan must certainly vary according to the navigational mode it's in at the time. (enroute, terminal. approach, RNP 10, 5, 1, .3 etc..) I think it also might matter whether the waypoint is coded as flyover or flypast.
I did a quick search of TSO 129 in hopes of finding a quick answer but alas no success. I feel certain the answer is hidden in a technical standard order somewhere...
westhawk
I did a quick search of TSO 129 in hopes of finding a quick answer but alas no success. I feel certain the answer is hidden in a technical standard order somewhere...
westhawk
Last edited by westhawk; 20th Dec 2012 at 05:18. Reason: another thought...
Join Date: Dec 2007
Location: Lithuania
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
I don't know about Boeing but lets just think in general.
I think just the distance doesn't make sense. You have to drive imaginary line that is perpendicular to the line to the next way-point. If you pass this line it should go to next way point.
I think just the distance doesn't make sense. You have to drive imaginary line that is perpendicular to the line to the next way-point. If you pass this line it should go to next way point.
Join Date: Nov 2000
Location: Grobelling through the murk to the sunshine above.
Age: 60
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
It depends on which Boeing, but the majority of modern ones sequence waypoints if they pass within 21 nm.
Last edited by Pub User; 20th Dec 2012 at 08:11.
Join Date: Oct 2006
Location: Ankh Morpork, DW
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
How about on approach when you've got 4 fixes on final and you're vectored inside number 4? I've seen it where the FMC sequences and where it doesn't.
Surely it's not 21nm for this instance, Shirley.
Surely it's not 21nm for this instance, Shirley.
Join Date: Apr 2008
Location: nowhere
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
But there does not seen to be any indication on the Boeing FMC on whether the waypoint is a fly-by or fly-over. The Universal FMS did have this feature and as well, you could turn a fly-by into a fly-over waypoint quite easily.
Guest
Join Date: Apr 2009
Location: On the Beach
Posts: 3,336
Likes: 0
Received 0 Likes
on
0 Posts
westhawk:
TSO 129, like 145/145 is a shell behind proprietary RTCA technical documents.
Later generation equipment does much better job with fly by waypoints than the earlier stuff. The point at which the turn begins is a function of ground speed and angle of course change. The RNP value or the sensitivity mode has nothing to do with it.
The distance at which an FMS/FMC/GPS navigator sequences to the next waypoint in the flight plan must certainly vary according to the navigational mode it's in at the time. (enroute, terminal. approach, RNP 10, 5, 1, .3 etc..) I think it also might matter whether the waypoint is coded as flyover or flypast.
I did a quick search of TSO 129 in hopes of finding a quick answer but alas no success. I feel certain the answer is hidden in a technical standard order somewhere...
I did a quick search of TSO 129 in hopes of finding a quick answer but alas no success. I feel certain the answer is hidden in a technical standard order somewhere...
Later generation equipment does much better job with fly by waypoints than the earlier stuff. The point at which the turn begins is a function of ground speed and angle of course change. The RNP value or the sensitivity mode has nothing to do with it.
TSO 129, like 145/145 is a shell behind proprietary RTCA technical documents.
Anyway, I learn something new most every day. This makes one more thing.
The point at which the turn begins is a function of ground speed and angle of course change.
The RNP value or the sensitivity mode has nothing to do with it.
Thanks,
westhawk
Guest
Join Date: Apr 2009
Location: On the Beach
Posts: 3,336
Likes: 0
Received 0 Likes
on
0 Posts
westhawk:
It is all a matter of the course, not the width of the sensivity of the CDI (or such). In the case of RNP AR where TF to TF course changes are used, the designers must use expansion areas to account for TF to TF flyby, and often impose a speed limit. This is why RF legs are much preferred for RNP AR.
So the maximum distance you can pass abeam of a fix and auto sequence to the next fix in the flight plan doesn't change according to the sensitivity mode then? Could you please verify that aterpster?