Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Engine Surge and Anti Ice


Notices
Tech Log The very best in practical technical discussion on the web

Engine Surge and Anti Ice

Old 4th September 2012 | 14:39
  #1 (permalink)  
Thread Starter
 
Joined: Aug 2010
Posts: 79
Likes: 0
From: between FL0-350
Engine Surge and Anti Ice

Greeting to all!

Just a quick question among many, in IAE (or rather any other type) if a surge occurs, the QRH says to ON the ENG ANTI ICE and WING ANTI ICE.

Why is it necessary to activate anti ice during a surge?

The manual also says, orange flame can be seen from the inlet in a severe case, so why the TAI supplied by Piccolo tube system (ENG ANTI ICE) should be "ON" ?

Thanks in advance!

Code 0
code0 is offline  
Reply
Old 4th September 2012 | 15:11
  #2 (permalink)  
 
Joined: Jan 2007
Posts: 180
Likes: 0
From: hertfordshire
Increased bleed air extraction from the engine causes the combustor to operate at a higher fuel-to-air ratio, which reduces the probability of flameout.Increased engine bleed air extraction does provide a large increase in the margin to flameout.

in my opinion.
eagerbeaver1 is offline  
Reply
Old 4th September 2012 | 15:37
  #3 (permalink)  
 
Joined: Mar 2002
Posts: 4,569
Likes: 1
From: Florida
Anything that lowers the back pressure in the compressor like more bleed air helps a tired engine avoid the natural surge line. Of course the turbine efficiency suffers and its temperature will rise for most controlling functions
lomapaseo is offline  
Reply
Old 4th September 2012 | 16:10
  #4 (permalink)  
Thread Starter
 
Joined: Aug 2010
Posts: 79
Likes: 0
From: between FL0-350
Thanks a trillion for the fast answers!

But for that purpose there are VBVs, TBVs right? so what you mean in the ANTI ICE system act as a indirect backup system for a engine Surge re-stabilization?

Thanks

Code0
code0 is offline  
Reply
Old 4th September 2012 | 23:21
  #5 (permalink)  
 
Joined: Sep 2010
Posts: 1,339
Likes: 0
From: earth
Reguardless, I believe the point is to lower high stage compressor pressure thus allowing the engine to suck bang and boom out the tailpipe. A.I is high stage air as it is hot. When VBV's/VSV's etc lack flow due to turbine speed, engines stall. I suppose A.I. would reduce the pressure, helping the ability of air to flow as the engine is designed.
grounded27 is offline  
Reply
Old 5th September 2012 | 08:45
  #6 (permalink)  
 
Joined: Apr 2010
Posts: 0
Likes: 0
From: Home soon
But for that purpose there are VBVs, TBVs right?
Nearly.The Variable Stator Vanes (VSV) and Transient Bleed Valve (TBV) prevent HPc and LPC stall,the Variable bleed valves do some else,,running out of battery..so till next time
de facto is offline  
Reply
Old 5th September 2012 | 11:24
  #7 (permalink)  
100 Countries Visited
25 Anniversary
 
Joined: Jul 1999
Posts: 162
Likes: 5
From: Out of a Suitcase
Post

We had an issue at high altitude where the bleed pressure would drop to the point that the bleed system would switch from the IP to HP valve causing the engine to surge as the valves opened and closed.

Anti ice increased the bleed pressure and prevented this from happening.
Eric Janson is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.