A320 Flight Director off on after startup
Thread Starter
Joined: Apr 2006
Posts: 529
Likes: 0
From: Asia
A320 Flight Director off on after startup
flight directors come ON at FMGC startup.
Is it necessary to turn it off until final alignment and MCDU setup is completed?
and also do so using both hands almost simultaneously to turn it on?
I've noticed this habit.
thanks many
Is it necessary to turn it off until final alignment and MCDU setup is completed?
and also do so using both hands almost simultaneously to turn it on?
I've noticed this habit.
thanks many
Joined: May 2002
Posts: 327
Likes: 10
From: Kiwiland
Different opinions ... Don't think it's an airbus requirement. Current employer always turn them both off after landing. Don't know why. Previous employer - we never touched them unless visual approach etc.
Some people think its a good reset of system. I don't think it's necessary.
Good practice using two hands.... Both off or both on! Guess its why 380/350 only has one button for both FDs.
Some people think its a good reset of system. I don't think it's necessary.
Good practice using two hands.... Both off or both on! Guess its why 380/350 only has one button for both FDs.
Last edited by goeasy; 27th August 2012 at 10:43.
Joined: Nov 2004
Aviation Qualifications: ATPL
Posts: 702
Likes: 0
From: CarrotLand
Originally Posted by goeasy
Good practice using two hands.... Both off or both on! Guess its why 380/350 only has one button for both FDs.
DSC-22-30-20 P5/6
Note: If AP/FDs are OFF, and FD2 then FD1 are engaged within 180 ms (one computation cycle),
a flip flop of master FMGC may occur.
Joined: Jul 2007
Posts: 46
Likes: 0
From: Airport
Hi,
I believe some do confuse Both FD's OFF and ON together with doing them simultaneously.It should not be done simultaneously for the reason Tiennetti has mentioned.
However they should be both ON or both OFF together.Has an impact on Auto Thrust modes.One of the reason for A320 accident at Bangalore if I remember correctly.
I believe some do confuse Both FD's OFF and ON together with doing them simultaneously.It should not be done simultaneously for the reason Tiennetti has mentioned.
However they should be both ON or both OFF together.Has an impact on Auto Thrust modes.One of the reason for A320 accident at Bangalore if I remember correctly.
Moderator
Joined: Apr 2004
Posts: 794
Likes: 0
From: Rome
Wow! Does that mean that having lost A/THR channel 1 you could "flip flop" to FMGC 2 as master and regain CAT3B capability?
A4
A4
Joined: Mar 2006
Posts: 2,633
Likes: 137
From: USA
Good practice using two hands.... Both off or both on! Guess its why 380/350 only has one button for both FDs.
If the PF decides to hand fly (no AP, A/T), wouldn't it be wise for the PM's FD to be up so he could more effectively monitor the PF's performance?
Joined: Mar 2006
Posts: 2,633
Likes: 137
From: USA
I understand that, but isn't it possible to have the FMA show:
___ | GS | LOC
In that case, the AT would be off, and the PF would be free to fly and not have to worry about the AT doing something inappropriate?
___ | GS | LOC
In that case, the AT would be off, and the PF would be free to fly and not have to worry about the AT doing something inappropriate?
Moderator
Joined: Apr 2004
Posts: 794
Likes: 0
From: Rome
Hi Check Airman,
The use of only 1 FD whilst the PF is handflying FD OFF can be quite misleading. You will be most of the time out of the bars as the sensitivity of the machine regarding corrections is obviously much higher than the human's one. I believe that the PNF has already his job in monitoring the parameters regardless of the FD indications. You can't monitor something that the other pilot is not following, i.e. FDs orders.
The use of only 1 FD whilst the PF is handflying FD OFF can be quite misleading. You will be most of the time out of the bars as the sensitivity of the machine regarding corrections is obviously much higher than the human's one. I believe that the PNF has already his job in monitoring the parameters regardless of the FD indications. You can't monitor something that the other pilot is not following, i.e. FDs orders.
Moderator
Joined: Apr 2004
Posts: 794
Likes: 0
From: Rome
Hi Check,
you can either be with ATHR on in speed mode (as in your example) or simply OFF. It doesn't really matter. You can be AP ON for the approach and manual thrust if you're not "satisfied with the ATHR performance"
Cheers.
you can either be with ATHR on in speed mode (as in your example) or simply OFF. It doesn't really matter. You can be AP ON for the approach and manual thrust if you're not "satisfied with the ATHR performance"
Cheers.
Joined: Sep 2013
Posts: 13
Likes: 0
From: cairo
FD engagement
All said about the flip flop is correct....you will risk inhibiting the engagement of your A/THR and vertical modes which is confusing and inconvenient and even sometimes hazardous considering that this will happen during flight when you are already under a load and maybe even in a critical phase....
as for the flight director engagement, it should not be done untill the preparation is complete and all the take-off speeds have been inserted because on many occasions, when the FD is engaged prior to inserting the speeds, the managed mode for take off speeds is not considered, and you will not see your speeds on the PFD in magenta, instead you will only see the number 100 in blue, or whatever speed you have selected on the FCU also in blue.......that can only be rectified by toggling your FD off-on again.
as for the flight director engagement, it should not be done untill the preparation is complete and all the take-off speeds have been inserted because on many occasions, when the FD is engaged prior to inserting the speeds, the managed mode for take off speeds is not considered, and you will not see your speeds on the PFD in magenta, instead you will only see the number 100 in blue, or whatever speed you have selected on the FCU also in blue.......that can only be rectified by toggling your FD off-on again.
