225 amps current limiter
Thread Starter
Joined: Dec 2011
Posts: 52
Likes: 0
From: Paris, London and New York
225 amps current limiter
Perhaps someone can help me understand how current limiter works.
On CJ there is a 225amps current limiter in crossfeed bus. According to training manual on the ground generator limit is 250 apms. So here is my question: When on the ground and one engine is running while crossfeeding power to all buses my limit is 225 amps and when both engines are running my amps limit now is 250 amps. Is that correct ?
Im asking because when we start one engine after lets say one week of no flying often gen amps is as high as lets say 220 amps. In such case I should wait till gen amps decrease below 200 before swithing on avionics in order not to exceed 225 amps of current limiter, correct ?
On CJ there is a 225amps current limiter in crossfeed bus. According to training manual on the ground generator limit is 250 apms. So here is my question: When on the ground and one engine is running while crossfeeding power to all buses my limit is 225 amps and when both engines are running my amps limit now is 250 amps. Is that correct ?
Im asking because when we start one engine after lets say one week of no flying often gen amps is as high as lets say 220 amps. In such case I should wait till gen amps decrease below 200 before swithing on avionics in order not to exceed 225 amps of current limiter, correct ?
Dog Tired
Joined: Oct 2001
Posts: 1,686
Likes: 2
From: uk
Oh, come on, it's just a question.
I have not flown the CJ but it sounds as if it's just a fuse (same in KingAir).
Yes, start first eng then allow the batteries to recover before starting second. Otherwise, the starting current reqd for the second eng start is likely to blow the fuse (current limiter).
I have not flown the CJ but it sounds as if it's just a fuse (same in KingAir).
Yes, start first eng then allow the batteries to recover before starting second. Otherwise, the starting current reqd for the second eng start is likely to blow the fuse (current limiter).
Thread Starter
Joined: Dec 2011
Posts: 52
Likes: 0
From: Paris, London and New York
Let me explain my problem in different way.
Current limiter in crossfeed bus is only 225 amps, yet allowable generator load in flight with single engine is 300 amps. How can 300 amps gen load be acceptable when crossfeed limiter is only 225 ?
Electrics was never my strong domains so having said that I assume that 300 amps load is being divided as it feeds three seperate busses and perhaps thats why 225 amps crossfeed limiter would not pop. Nevertheless I hope my older, wiser coligues can shed some light on it.
Current limiter in crossfeed bus is only 225 amps, yet allowable generator load in flight with single engine is 300 amps. How can 300 amps gen load be acceptable when crossfeed limiter is only 225 ?
Electrics was never my strong domains so having said that I assume that 300 amps load is being divided as it feeds three seperate busses and perhaps thats why 225 amps crossfeed limiter would not pop. Nevertheless I hope my older, wiser coligues can shed some light on it.
Joined: Dec 1998
Posts: 4,282
Likes: 6
From: Escapee from Ultima Thule
Because the single engine, 300A allowable load is supplying both its bus and, through the bus-tie, the bus for the failed generator. The working generator has to have a greater allowable load than the bus-tie in order to supply the bus-tie's load *plus* its own bus' load.
Last edited by Tinstaafl; 21st April 2012 at 17:40.
Joined: May 2001
Posts: 10,804
Likes: 1
The limiter is there so that if the reason for the first generator going US was because of a short taking it out with over 300amps pulled.
Then when the bus tie is engaged it doesn't weld/crew keep there finger on it, it doesn't take the other one with it as well.
Then when the bus tie is engaged it doesn't weld/crew keep there finger on it, it doesn't take the other one with it as well.
Joined: Jun 2010
Posts: 381
Likes: 0
From: Canada
It would probably help to understand what current limiting actually is. You won't fully understand why it's 225 amps until you understand what a current limiter does and why they're in airplanes.
Current limiting - Wikipedia, the free encyclopedia
Current limiting - Wikipedia, the free encyclopedia
