Notices
Tech Log The very best in practical technical discussion on the web

TCAS RA

Old 3rd May 2010 | 02:10
  #1 (permalink)  
Thread Starter
 
Joined: Jan 2008
Posts: 6
Likes: 0
From: Florence
TCAS RA

Assumption: TCAS RA are only on vertical plane.
What kind of Resolution advisory can I get from TCAS if I fly at my service cruise altitude towards another aircraft cruising at the same altitude?
Does the TCAS take into account that I can't climb anymore or not fast enough as it could command?
And what about the other conflicting traffic?
Is there any improvement to this technology?

Thanks for your reply..
I-FICO is offline  
Reply
Old 3rd May 2010 | 03:12
  #2 (permalink)  
20 Anniversary
 
Joined: Mar 2004
Posts: 435
Likes: 30
From: UK
You will find that all aircraft are certified to around 800ft above their normal max cruise altitude. This allows you to react to a TCAS RA even at max alt. Try it next time you are in the sim and you will find that it is not an issue as speed can be traded for altitude.
Fly3 is offline  
Reply
Old 3rd May 2010 | 09:13
  #3 (permalink)  
15 Anniversary
 
Joined: Mar 2009
Posts: 224
Likes: 0
From: Poland
Fly 3 - I have no idea if you are correct about the 800ft over Max Cruise certification, but I would warn you about trading speed for altitide when flying at or close to your Max Cruise Level.

Buffet Margin IS an issue!!
clivewatson is offline  
Reply
Old 3rd May 2010 | 09:47
  #4 (permalink)  
 
Joined: Oct 2009
Posts: 1,270
Likes: 0
From: UK
Hi clive,

From Airbus FCTM SI 060 P3/4

If a RA is generated: • The flight crew must always follow the TCAS RA orders in the correct direction, even: ‐
If the TCAS RA orders are in contradiction with the ATC instructions ‐
At the maximum ceiling altitude with CLIMB, CLIMB or INCREASE CLIMB, INCREASE CLIMB TCAS RA orders ‐
If it results in crossing the altitude of the intruder.
I think you'll find it's cheaper to nibble into the buffet margin rather than hit the other aircraft.

Last edited by rudderrudderrat; 3rd May 2010 at 09:52. Reason: format
rudderrudderrat is offline  
Reply
Old 3rd May 2010 | 16:17
  #5 (permalink)  
Registered User **
 
Joined: Mar 2009
Posts: 480
Likes: 0
From: USA
but I would warn you about trading speed for altitide when flying at or close to your Max Cruise Level.
I do not think this is an issue when it is the only resolution to avoiding a head on crash, I would hope you would prefer to recover from a stall with your aircraft intact over the obvious other option.
muduckace is offline  
Reply
Old 4th May 2010 | 04:00
  #6 (permalink)  
20 Anniversary
 
Joined: Mar 2004
Posts: 435
Likes: 30
From: UK
Buffet margin is only an issue if you have been stupid enough to climb to max alt when you are very heavy rather than optimum alt which is the norm.
Fly3 is offline  
Reply
Old 4th May 2010 | 09:30
  #7 (permalink)  
 
Joined: Sep 1998
Posts: 1,615
Likes: 1
From: wherever
Type dependant.

My type won't give climbs or increase climbs above FL340.
FE Hoppy is offline  
Reply
Old 4th May 2010 | 10:35
  #8 (permalink)  
15 Anniversary
 
Joined: Mar 2009
Posts: 224
Likes: 0
From: Poland
Buffet margin is only an issue if you have been stupid enough to climb to max alt when you are very heavy rather than optimum alt which is the norm.
Fly 3, I don't want to get into an argument with you. In my post I mentioned that Buffet Margin is an issue. I don't think you can dispute that. As FE Hoppy points out, his type inhibit TCAS Climb RA's above FL340 probably for this very reason.

I would also add that there could be a number of NOT stupid reasons to fly at altitudes above that which may be optimum on the day. Surely also you acknowledge that buffet margins vary widely from type to type, and that it is not necessarily stupid pilots who find themselves flying with narrow margins.

Like I said...it's just an issue, but please feel free to have the last word.
clivewatson is offline  
Reply
Old 4th May 2010 | 21:16
  #9 (permalink)  
 
Joined: Feb 2007
Posts: 478
Likes: 0
From: -------
Technically speaking, when a TCAS is fitted in an aircraft the software takes account of the flight envelope of the aircraft, so it's quite unlikely to have an RA that will bust some limitations, anyway, if you really can't comply, at least stay where you are and don't react in opposite direction, it's gonna save your ass anyway, maybe !!!

FB
Fullblast is offline  
Reply
Old 4th May 2010 | 23:51
  #10 (permalink)  
 
Joined: Oct 2007
Posts: 27
Likes: 0
From: UK
Yes, TCAS RAs are only in the vertical plane.
If an aircraft is at its service ceiling, this can be taken into account by TCAS which can be "climb inhibited".
In the scenario described by I-FICO there are three possible outcomes depending on which aircraft declares an RA first and the Mode S addresses of the two aircraft.
1. Own aircraft stays level (told not to descend) and the other aircaft descends.
2. Own aircraft told to descend and the other aircraft climbs...
3. ...unless the other aircraft is also climb inhibited, in which case own aircraft descends and the other aircraft stays level.
fellman is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.