Tristar L-1011 FMS & Autopilot
Join Date: Aug 2006
Location: Sri Lanka
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
TriStar,
Simply magnificent,
When I was a kid I used fly a lot on the AirLanka TriStars between Colombo and Frankfurt.
They were such amazing machines, way ahead of their time and one of the reasons I wanted to start flying.
Probably 411A would have been flying them at that time.
The one regret I have is never having gotten the chance to fly one of them, would have been nice to see stuff like DLC etc. in action.
Instead I ended up being in the playstation generation only flying glasscockpit ever since. But there are quite a few guys who would have loved to fly the old girl, especially when we talk to people who have flown them into places like Kai Tak with a little smile on their faces remembering an era long long gone.
The TriStar was Lockheed's masterpiece of civil aviation setting the benchmark for others to follow.
Simply magnificent,
When I was a kid I used fly a lot on the AirLanka TriStars between Colombo and Frankfurt.
They were such amazing machines, way ahead of their time and one of the reasons I wanted to start flying.
Probably 411A would have been flying them at that time.
The one regret I have is never having gotten the chance to fly one of them, would have been nice to see stuff like DLC etc. in action.
Instead I ended up being in the playstation generation only flying glasscockpit ever since. But there are quite a few guys who would have loved to fly the old girl, especially when we talk to people who have flown them into places like Kai Tak with a little smile on their faces remembering an era long long gone.
The TriStar was Lockheed's masterpiece of civil aviation setting the benchmark for others to follow.
Thread Starter
Join Date: Nov 2008
Location: The New Forest, UK
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Auto turubulance & gust stabilization
When engaged the AP also provides for automatic stabilization for turubulance & gusts (i.e. attitude regulation aided by the IRS) but once disengaged and the plane is being maually flown this stabilisation aid lost.
On a manaully flown gusty approach ( or after AP disengage beyond DH ) what automatic satbilization support was available?
On a manaully flown gusty approach ( or after AP disengage beyond DH ) what automatic satbilization support was available?
Join Date: Mar 2000
Location: Arizona USA
Posts: 8,571
Likes: 0
Received 0 Likes
on
0 Posts
On a manaully flown gusty approach ( or after AP disengage beyond DH ) what automatic satbilization support was available?
This system also provides two other functions....runway alignment and rollout, however for autolands only.
In addition, DLC is available all the way to touchdown.
Join Date: Nov 2006
Location: world
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Miss you
The airplane that i´ll never forgget. A true lady and yet a gentleman. Miss it so very much
The last time i´ve pulled the reversers on the RB´s
YouTube - My last L1011 landing
The last time i´ve pulled the reversers on the RB´s
YouTube - My last L1011 landing
Join Date: Jan 2006
Location: Georgia, USA
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
On the other hand I, like a great many other engineers that had the misfortune to work on the old hangar queen will have no difficulty forgetting it.....
Join Date: Dec 2008
Location: Portugal
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
A colleague of mine at TAP misses the TriStar and tells me that even the maintenance manuals are so well built and intuitive, it would actually teach you how to work on the aircraft!
Would you agree to this?
Would you agree to this?
Join Date: Mar 2000
Location: Arizona USA
Posts: 8,571
Likes: 0
Received 0 Likes
on
0 Posts
General fault issues would be recorded in the tech log using the FIRM manual.
Usually a code number only, however oftentimes some airlines required the written text as well, for clarification.
SaudiArabian was one of the latter.
This FIRM code would also be communicated to the destination station when in-range (usually about 100 miles) and ground maintenance personnel would then refer to their manual, to assertain the correct rectification, using the FIRM code.
Many times I would taxi up to the parking stand, and there would be the ground engineer, parked in his vehicle, with the required avionics units to be replaced.
Oftentimes the job would be completed in twenty minutes.
Some airlines casually dismissed the FIRM method as being 'obtuse' however in my experience it worked to a 'T'...at least from this pilots perspective.
Usually a code number only, however oftentimes some airlines required the written text as well, for clarification.
SaudiArabian was one of the latter.
This FIRM code would also be communicated to the destination station when in-range (usually about 100 miles) and ground maintenance personnel would then refer to their manual, to assertain the correct rectification, using the FIRM code.
Many times I would taxi up to the parking stand, and there would be the ground engineer, parked in his vehicle, with the required avionics units to be replaced.
Oftentimes the job would be completed in twenty minutes.
Some airlines casually dismissed the FIRM method as being 'obtuse' however in my experience it worked to a 'T'...at least from this pilots perspective.
Thread Starter
Join Date: Nov 2008
Location: The New Forest, UK
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Dlc & Sas
... reading some of these messages it appears implied that DLC was unique to the TriStar, what about other wide bodies? The 747 has a similar array of speed brakes and spoilers.
411A,
does that mean that SAS and DLC ( & YD) remained active (or could remain if so commanded) after AP was disconnected as for instance during a manual approach?
411A,
does that mean that SAS and DLC ( & YD) remained active (or could remain if so commanded) after AP was disconnected as for instance during a manual approach?
Join Date: Nov 2007
Location: A Restless Spirit on an Endless Flight!
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Seems I remember a problem with the "S-ducting" that routed air to the center engine. There were some fiberglass fittings that could break away and find themselves going into the engine? Caused some inflight shutdowns?
Join Date: Mar 2000
Location: Arizona USA
Posts: 8,571
Likes: 0
Received 0 Likes
on
0 Posts
411A,
does that mean that SAS and DLC ( & YD) remained active (or could remain if so commanded) after AP was disconnected as for instance during a manual approach?
Yes, SAS (yaw damping and turn co-ordination) was a full time operation, either manual or auto flight.
DLC was also full time, either manual or autoflight, and was initiated when the flap handle passed the 30 degree position.
Correct, unique to the TriStar amongst civil jet transports.
Also unique was the all moving tailplane for pitch control.
A delight to fly.
Having said this, these airplanes are definitely getting old, and consume considerable man-hours to keep 'em going.
Having Lockheed and RR factory trained folks certainly helps.
does that mean that SAS and DLC ( & YD) remained active (or could remain if so commanded) after AP was disconnected as for instance during a manual approach?
Yes, SAS (yaw damping and turn co-ordination) was a full time operation, either manual or auto flight.
DLC was also full time, either manual or autoflight, and was initiated when the flap handle passed the 30 degree position.
... reading some of these messages it appears implied that DLC was unique to the TriStar
Also unique was the all moving tailplane for pitch control.
A delight to fly.
Having said this, these airplanes are definitely getting old, and consume considerable man-hours to keep 'em going.
Having Lockheed and RR factory trained folks certainly helps.
Thread Starter
Join Date: Nov 2008
Location: The New Forest, UK
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Thanks 411A
Interesting that the SAS was full time. Obviously control system design stopped it flighting pilot inputs.
Did these unique TriStar features make it difficult for crews to move to say a DC-10 or 747 interchangably? As you'll know BA operated all three wide bodies for a while after it absorbed BCal so multi-type certified pilots were probably desirable.
Regardig the variable incidence tail plane, the 727 and other T-tails moved the whole thing during rotation ( & for trimming but stand to be corrected) , but not sure if only the elevators were used for pitch control in other phases of flight. I suppose that when large moments are required the whole stabiliser moves on most modern jets 747 and DC1-0 included.
Interesting that the SAS was full time. Obviously control system design stopped it flighting pilot inputs.
Did these unique TriStar features make it difficult for crews to move to say a DC-10 or 747 interchangably? As you'll know BA operated all three wide bodies for a while after it absorbed BCal so multi-type certified pilots were probably desirable.
Regardig the variable incidence tail plane, the 727 and other T-tails moved the whole thing during rotation ( & for trimming but stand to be corrected) , but not sure if only the elevators were used for pitch control in other phases of flight. I suppose that when large moments are required the whole stabiliser moves on most modern jets 747 and DC1-0 included.
Join Date: Jan 2006
Location: Georgia, USA
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
does that mean that SAS and DLC ( & YD) remained active (or could remain if so commanded) after AP was disconnected as for instance during a manual approach?
DLC was also full time, either manual or autoflight, and was initiated when the flap handle passed the 30 degree position.
The DLC system can be shut off by unlatching the DLC/AUTO SPOILER switch light on the pilots overhead panel. However, if the switch was unlatched the pilot would have to manualy deploy the spoilers, if required, after touchdown.
Seems I remember a problem with the "S-ducting" that routed air to the center engine. There were some fiberglass fittings that could break away and find themselves going into the engine? Caused some inflight shutdowns?
Thread Starter
Join Date: Nov 2008
Location: The New Forest, UK
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
...The DLC system can be shut off by unlatching the DLC/AUTO SPOILER switch light ...
What about SAS, were means provided to switch it off should it be required?(although it would normally be active)
Join Date: Mar 2000
Location: Arizona USA
Posts: 8,571
Likes: 0
Received 0 Likes
on
0 Posts
What about SAS, were means provided to switch it off should it be required?(although it would normally be active)
727 was pretty straight fwd, stab was only for trimming.
The L1011 is unique with it's all-moving tailplane for pitch control on civil jet transport aircraft.
Also note that the L1011 has four hydraulic systems (same for 747) but unlike other first generation wide-body jet transports, which had only three.
Thread Starter
Join Date: Nov 2008
Location: The New Forest, UK
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
HS Trident all-flying tailplane
An interesting variation on a theme is that the HS Trident, unlike its 727 look-alike, used the whole tailplane for pitch control I have seen pics of it fully deployed at rotation. Ditto for the VC-10 .
So in this sense tailplane use was similar to that of the TriStar.
So in this sense tailplane use was similar to that of the TriStar.
Join Date: Mar 2000
Location: Arizona USA
Posts: 8,571
Likes: 0
Received 0 Likes
on
0 Posts
**So in this sense tailplane use was similar to that of the TriStar.**
Don't think so, however those that have flown these types can comment.
Keep in mind that with the L1011, when the pilot pulls back on the pole (or, pushes forward) the entire horizontal tailplane moves.
The entire tailplane also moves with trim input.
The elevators are not directly controlled by the pilot...IE: they are mechanically linked to the stabilizer.
AFAIK, this arrangement is unique amongst western civil jet transport aircraft.
Certainly correct.
Note.
If a go-around is desired, the first action of the pilot is to apply go-around thrust.
By doing so, DLC is automatically disabled (active spoilers stowed), prior to moving the flaps to the 22 degree position...which would then be the next pilot action.
Full time automation...a TriStar exclusive at the time.
Don't think so, however those that have flown these types can comment.
Keep in mind that with the L1011, when the pilot pulls back on the pole (or, pushes forward) the entire horizontal tailplane moves.
The entire tailplane also moves with trim input.
The elevators are not directly controlled by the pilot...IE: they are mechanically linked to the stabilizer.
AFAIK, this arrangement is unique amongst western civil jet transport aircraft.
DLC is active anytime aircraft was in in the landing configuration: 2 of the 3 engines are less than full power and the flaps greater than 30 degrees.
Note.
If a go-around is desired, the first action of the pilot is to apply go-around thrust.
By doing so, DLC is automatically disabled (active spoilers stowed), prior to moving the flaps to the 22 degree position...which would then be the next pilot action.
Full time automation...a TriStar exclusive at the time.