C525 flap setting on ground
Thread Starter
Joined: Jul 2003
Posts: 265
Likes: 0
From: germany
C525 flap setting on ground
Hi,
Any CJ driver (or anybody else) knows why the flaps on the C525 (I fly a CJ1+) have to be in T/O position when the aircraft is parked? We recently had a AOG due to a hydraulic leak on the left wing portion and suspect that it might be due to having the flaps in the UP instead of the T/O position a couple of times when the aircraft was on the ground (of course, the origin of the leak may be due to other reasons but I was wondering if it was such a fundamental difference if the flaps were UP or in T/O).
Cheers
Cecco
Any CJ driver (or anybody else) knows why the flaps on the C525 (I fly a CJ1+) have to be in T/O position when the aircraft is parked? We recently had a AOG due to a hydraulic leak on the left wing portion and suspect that it might be due to having the flaps in the UP instead of the T/O position a couple of times when the aircraft was on the ground (of course, the origin of the leak may be due to other reasons but I was wondering if it was such a fundamental difference if the flaps were UP or in T/O).
Cheers
Cecco
Joined: Mar 2009
Posts: 224
Likes: 0
From: Poland
On the cable operated flaps of the CE 500 series, the flaps should be left in take off position to relieve stretching of the cables.
In the case of hydraulic operated flaps there is no good reason to leave flaps partially extended. Doing so exposes the extended hydraulic actuators to the elements.
In the case of hydraulic operated flaps there is no good reason to leave flaps partially extended. Doing so exposes the extended hydraulic actuators to the elements.
Joined: Mar 2003
Posts: 341
Likes: 0
From: deco stop
Dont know...but
on the early Citation 3, the instruction was to leave first stage flap down, when on the ground.
Due to the (regular) failure of the flap motor and its sync sensor...(I think).
1st stage flap, was then possible for take off, and flight, and landing.
Perhaps zero flap not approved for TO.??????
Not flown a C3 for many years, but we did have TWO failures of sync.
windy
Due to the (regular) failure of the flap motor and its sync sensor...(I think).
1st stage flap, was then possible for take off, and flight, and landing.
Perhaps zero flap not approved for TO.??????
Not flown a C3 for many years, but we did have TWO failures of sync.
windy
