Damp/damp/damp
Thread Starter
Join Date: Apr 2003
Location: Sutton
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Damp/damp/damp
Can someone please confirm this needs to be reported on the ATIS. I was operating into a UK airfield recently. We had asked London info for the wx with an hour to go....got the ATIS as soon as it was within range ...neither mentioned the runway state.
I have always understood that no mention of runway state means it is dry.Had the aircraft been 10 % heavier we would have been outside the dry max landing weight. I asked approach to confirm the runway was dry...answer was Damp X 3! We diverted.
This runway has a history of being slippery and the C of F on a damp runway could have made the landing very interesting.
I have always understood that no mention of runway state means it is dry.Had the aircraft been 10 % heavier we would have been outside the dry max landing weight. I asked approach to confirm the runway was dry...answer was Damp X 3! We diverted.
This runway has a history of being slippery and the C of F on a damp runway could have made the landing very interesting.
Guest
Posts: n/a
If the runway was in the UK and at a certified airport and you had not received a NOTAM declaring that it "may be slippery when wet" then you may have diverted for no reason.
The airport has been windy in the past..........
Thunderstorms are a known problem here......
Damp in a number of states has no basis, try AMS. It is just visible staining of the surface.
Was the runway constructed of skid resistant material eg PFC, GMA or BBA?
What is its LDA and, for your mass, what was your LDAr?
What is the name of your Flight Ops Director and does he serve biscuits when he has a "chat" with you?
Good luck!
Sir George Cayley
The airport has been windy in the past..........
Thunderstorms are a known problem here......
Damp in a number of states has no basis, try AMS. It is just visible staining of the surface.
Was the runway constructed of skid resistant material eg PFC, GMA or BBA?
What is its LDA and, for your mass, what was your LDAr?
What is the name of your Flight Ops Director and does he serve biscuits when he has a "chat" with you?
Good luck!
Sir George Cayley
Join Date: Sep 2007
Location: london, UK
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
I dont ever recall being asked to broadcast runway surface conditions on the ATIS other than when snow, ice or freezing fog were current weather conditions. With the UK weather as temperamental as it is, if I had to put "damp/damp/damp" out every time it actually was, then we'd never land or depart anything, cos the griptester would be permanently out on the runway!
BTW, we only broadcast runway surface conditions via ATIS when requested to by the Airport Operator (BAA).
BTW, we only broadcast runway surface conditions via ATIS when requested to by the Airport Operator (BAA).
Join Date: Sep 2007
Location: UAE
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Someone once told me that damp x 3 means that the R/W is divided into three portions and all the three are damp. However, I have not been able to get any written info. about it. Can anyone quote authority? I have heard this on ATIS at Manchester England.
Join Date: Aug 2002
Location: Switzerland, Singapore
Posts: 1,309
Received 0 Likes
on
0 Posts
It also depends on your company procedures.
All companies I know consider damp as dry for performance calculation, as long as there is no BC or BA (braking action or coefficient) is given. If ATC doesn't give you one of these two, you can safely assume that the BA is "good" and the BC is above 0.4.
It's something else if ATC tells you BC "unreliable", but mostly this is not because the runway is slippery, but because the BC is not measurable with the equipment given on the airport.
But it's also good to go on the safer side and do the divertion.
hth,
Dani
All companies I know consider damp as dry for performance calculation, as long as there is no BC or BA (braking action or coefficient) is given. If ATC doesn't give you one of these two, you can safely assume that the BA is "good" and the BC is above 0.4.
It's something else if ATC tells you BC "unreliable", but mostly this is not because the runway is slippery, but because the BC is not measurable with the equipment given on the airport.
But it's also good to go on the safer side and do the divertion.
hth,
Dani
Buttonpusher
Someone once told me that damp x 3 means that the R/W is divided into three portions and all the three are damp. However, I have not been able to get any written info. about it. Can anyone quote authority? I have heard this on ATIS at Manchester England.
In my book damp = dry for performance purposes, unless otherwise promulgated...
I did hear the runway being described as "moist" on approach to LGW once, accompanied by much schoolboy sniggering.
I did hear the runway being described as "moist" on approach to LGW once, accompanied by much schoolboy sniggering.
Someone once told me that damp x 3 means that the R/W is divided into three portions and all the three are damp. However, I have not been able to get any written info. about it. Can anyone quote authority? I have heard this on ATIS at Manchester England.