Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

Flat tyre?

Thread Tools
 
Search this Thread
 
Old 6th Jun 2007, 17:28
  #21 (permalink)  
Thread Starter
 
Join Date: Mar 2006
Location: Choroni, sometimes
Posts: 1,974
Likes: 0
Received 0 Likes on 0 Posts
@stator vane

Same happened to us. So my concerns are

- no tyre pressure indication in cockpit
- no wheel-well fire warning/fighting
- no daily manuell pressure check.......

and you start taxiing 4 miles with a heavy-weight aircraft for takeoff
hetfield is offline  
Old 6th Jun 2007, 19:14
  #22 (permalink)  
 
Join Date: Jul 1999
Location: Europe
Posts: 352
Likes: 0
Received 0 Likes on 0 Posts
Tyre pressure is checked daily by your ground engineer. As for wheel-well fire detection, Airbus is relying on brake temp indication for that.
Clarence Oveur is offline  
Old 6th Jun 2007, 19:18
  #23 (permalink)  
Thread Starter
 
Join Date: Mar 2006
Location: Choroni, sometimes
Posts: 1,974
Likes: 0
Received 0 Likes on 0 Posts
@Clarence Oveur

Yes, I know. Did you ever check the MEL about break temp ind sys.......?

To make it clear for everybody. Airbuses don't have a wheel-well fire warning, some even don't have a tyre-pressure-indication in the cockpit either.

The only thing left to detect a possible fire in the wheel-well is the brake-temp-indication, which may be inop if brake cooling-schedule is observed....

Last edited by hetfield; 6th Jun 2007 at 19:32.
hetfield is offline  
Old 7th Jun 2007, 09:11
  #24 (permalink)  
 
Join Date: Jul 1999
Location: Europe
Posts: 352
Likes: 0
Received 0 Likes on 0 Posts
Yes, I do know what the MEL says about brake temp ind. I also know a bit about the analysis required before items can be included in the MMEL.

No doubt the first chapter of your company MEL will state that the commander can refuse an aircraft with inop equipment, even if the MEL says it's a GO item.

If you feel so strongly that it is unsafe not to have tyre pressure indication in cockpit / wheel-well fire warning / brake temp ind. there is only one thing to do.
Clarence Oveur is offline  
Old 7th Jun 2007, 09:27
  #25 (permalink)  
Thread Starter
 
Join Date: Mar 2006
Location: Choroni, sometimes
Posts: 1,974
Likes: 0
Received 0 Likes on 0 Posts
If you feel so strongly that it is unsafe not to have tyre pressure indication in cockpit / wheel-well fire warning / brake temp ind. there is only one thing to do.

Yes, I fully agree.
hetfield is offline  
Old 7th Jun 2007, 14:03
  #26 (permalink)  
 
Join Date: Dec 2005
Location: Netherlands
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Tyre pressure indicators

Paul Wilson,
You quote about four quid for low pressure indicators for car tyres. By the time it has been approved, certified and anything else that can be thought of to bump the price, I think you would have to be thinking of at least ten times the cost for a car. (Even though it is identical).

World of Tweed,
I think you are referring to the inflation valves incorporating a pressure gauge, If so these are optional to the standard valve stem installed on wheels. I have worked on several operators B757s and never had them fitted to this aircraft. I have, however, seen them on other types, and not necessarily on every wheel. They are useful, as it saves carrying a tyre pressure gauge on a walk round and, are calibrated to within 10% accuracy,when new.
JamesA is offline  
Old 7th Jun 2007, 16:21
  #27 (permalink)  
 
Join Date: Sep 1998
Location: wherever
Age: 55
Posts: 1,616
Likes: 0
Received 0 Likes on 0 Posts
Check the brake temps during the taxi. If one is significantly lower than the rest the tyre may be flat.
FE Hoppy is offline  
Old 7th Jun 2007, 17:10
  #28 (permalink)  
 
Join Date: Nov 2000
Location: Planet Claire
Age: 63
Posts: 587
Likes: 0
Received 0 Likes on 0 Posts
smudge

Not so sure about low pressure doing that.........depends how low, 'low' is I guess.

No pressure on the other hand. Unless you spot the deflated one on the walk round, and believe me you could easily miss it- even if you kick it, NO pressure will cause no torque to be passed into the brake pack. The brake normally converts the torque into heat, so no torque- no heat.

If you land and one brake temp stays very low- you've got a flat.
brain fade is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.