Visual Reference In CatIIIB
Thread Starter
Join Date: Apr 2005
Location: Dubai
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Visual Reference In CatIIIB
A query was raised in 'Questions' about how many lights should be visible at a CatIIIA DH, however I would like to extend this to include CatIIIB, but rather that say how many lights, I would simply like to ask what visual reference should you have on touch down (if any). There seems to be some confusion certainly in my mind about the requirement and a few of my fellow pilots are experiencing the same thing. I know this is rather academic and the probability of actually having no visual reference at all is miniscule, but I would be interested in some guidance on the subject.
Just for info we have an interesting contradiction, our Ops Manual says 'At least one light is attained and can be maintained' but at 200' we announce 'Landing' (A330 Alert Height) and are being told that the visual reference at DH is now irrelevent since you are beyond the Approach Ban Point and the Auto Land light has not illuminated.
Regards
TOD
Just for info we have an interesting contradiction, our Ops Manual says 'At least one light is attained and can be maintained' but at 200' we announce 'Landing' (A330 Alert Height) and are being told that the visual reference at DH is now irrelevent since you are beyond the Approach Ban Point and the Auto Land light has not illuminated.
Regards
TOD
Junior trash
Join Date: Nov 1999
Location: UK
Posts: 1,025
Likes: 0
Received 0 Likes
on
0 Posts
Depends if you are doing a Cat 3B (no DH) approach or just a CAT 3B approach. 3B no DH requires no visual reference and a normal CAT 3B requires 1 centreline light. Depends if you have Fail Operational (no DH) or Fail Passive (with DH) autopilots available. On 744 3 autopilots means no DH and if you lose 1 and become Land 2 you use 3B with DH and requirement for visual reference. On previous type we only had 2 autopilots so could only do approaches with 50ft DH/150m RVR. On both 744 and previous type in the fail passive (2 autopilot case) the aircraft trimmed back to allow safe GA in event of a (further) failiure.
Join Date: Sep 2001
Location: LHR
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Cat 3B with decision height
The requirement is as stated above to be able to see 1 centreline light at decision.
What puzzles me is how do you know its a centreline light when its the only one visible? !!
What puzzles me is how do you know its a centreline light when its the only one visible? !!
You don't know! Cat 3 is intended for autoland so you have to rely on the kit putting you on the centreline. You will never have sufficient reference to really allow a manual landing. The Cat 3A minima only allows the pilot to ascertain that the aircraft is landing (itself) in the touchdown zone (hopefully). A Cat 3B approach adds the safety of ensuring a rollout on the centreline.
ALL of the above assumes correctly operating (and operated) certified kit in the aircraft and on the airfield.
Join Date: Feb 2006
Location: Somewhere between the Airfield ops and 26L
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Cat 3A Visual Requirements
A segment of at least 3 consecutive lights being the centreline of the approach lights, or TDZ lights, or runway centreline lights , or runway edge lights, or a combination of these is maintained and can be maintained.
Descent below DH without adequate visual reference is prohibited.
in the trusty 737 any AP disconect/Nav set failure/ 2 or more deviation flashes or Stab out of Trim below 500R is a mandatory Go Around
Descent below DH without adequate visual reference is prohibited.
in the trusty 737 any AP disconect/Nav set failure/ 2 or more deviation flashes or Stab out of Trim below 500R is a mandatory Go Around
Join Date: Jul 1999
Location: Europe
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
A bit off topic...
Depends if you have Fail Operational (no DH) or Fail Passive (with DH) autopilots available. On 744 3 autopilots means no DH and if you lose 1 and become Land 2 you use 3B with DH and requirement for visual reference. On previous type we only had 2 autopilots so could only do approaches with 50ft DH/150m RVR. On both 744 and previous type in the fail passive (2 autopilot case) the aircraft trimmed back to allow safe GA in event of a (further) failiure.
Junior trash
Join Date: Nov 1999
Location: UK
Posts: 1,025
Likes: 0
Received 0 Likes
on
0 Posts
Perhaps you could explain how you are Fail Operational with 3 AP, but not with 2?
Join Date: Jan 2001
Location: UK
Posts: 2,044
Likes: 0
Received 0 Likes
on
0 Posts
Perhaps you could explain how you are Fail Operational with 3 AP, but not with 2?
Because with 3 you still have comparison/monitoring left when one fails
Because with 3 you still have comparison/monitoring left when one fails
NoD
Couldonlyaffordafiver
Join Date: Dec 2000
Location: The Twilight Zone near 30W
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
For CAT 3b, you require rollout guidance in order to track the centreline after touchdown. For this, there needs to be an autopilot channel to the rudder. The 737 does not have this (although I understand it may be an option on the NG), whereas more recent types do. Certain failures in a 737 will leave you with one autopilot so you cannot Autoland. Similar failures in an Airbus will still leave you with two, although they may be downgraded. However, below 200' RA, you won't know there has been a failure until after you've landed (fail operational).
Join Date: Dec 1999
Location: Oop North, UK
Posts: 3,076
Likes: 0
Received 0 Likes
on
0 Posts
Not quite a simple as that. Unless I am much mistaken, I have yet to find AP3 on an Airbus (A320 etc., and A340 as I recall...), but we are quite happy doing CAT3B No DH etc...
NoD
NoD
Just another number
Join Date: Jun 2001
Location: UK
Age: 76
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: May 2003
Location: Abu Dhabi
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
CAT III b with a decision height one light is required
CAT III b with no decision height (alert height) there is no requirement to see anything prior to touchdown.
Could be wrong but that’s the way I understand it.
CAT III b with no decision height (alert height) there is no requirement to see anything prior to touchdown.
Could be wrong but that’s the way I understand it.