Column Displacement
Thread Starter
Join Date: Mar 2004
Location: South East England
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Column Displacement
It's an odd question but does anybody happen to know
the max control column displacements (in degrees) of the
Boeing 737 NG series?
Failing that does anybody have a protractor and a 737 I can borrow?
Kind regards
Low Fi
the max control column displacements (in degrees) of the
Boeing 737 NG series?
Failing that does anybody have a protractor and a 737 I can borrow?
Kind regards
Low Fi
Thread Starter
Join Date: Mar 2004
Location: South East England
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to be confusing, I'll try and clarify.
I'm not talking about handling requirements or anything that involved, just literally what is the maximum angle you can rotate the control wheel (from neutral) before it hits the stops (and physically can't move any further). Similarly what is the maximum fore/aft deflection of the column before it hits the stops.
The reason I ask is that I have some old simulator data that records control column and wheel deflections as a ratio of the maximum displacement. I was hoping to convert the values into meaningful engineering units.
Does this help at all?
Low fi
I'm not talking about handling requirements or anything that involved, just literally what is the maximum angle you can rotate the control wheel (from neutral) before it hits the stops (and physically can't move any further). Similarly what is the maximum fore/aft deflection of the column before it hits the stops.
The reason I ask is that I have some old simulator data that records control column and wheel deflections as a ratio of the maximum displacement. I was hoping to convert the values into meaningful engineering units.
Does this help at all?
Low fi
Join Date: Apr 2004
Location: near EDDF
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts