Citizen Navihawk Watch
Thread Starter
Join Date: Dec 2002
Location: Sand Pit
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Citizen Navihawk Watch
Ive lost the AFM for my Citizen Navihawk watch....
for those of you that may know how or still have the manual. I need to reset the digital and analogue as they no longer match up.
The Minute hand is missmatched to the digitale display by aprx 6 minutes and I have no idear how to sink them again.....Any help is appreciated.
Thanks MJB
for those of you that may know how or still have the manual. I need to reset the digital and analogue as they no longer match up.
The Minute hand is missmatched to the digitale display by aprx 6 minutes and I have no idear how to sink them again.....Any help is appreciated.
Thanks MJB
Join Date: May 2004
Location: UK
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Switch to CHR mode, pull out the stopper and wait for the hands to retract. Change the selected hand with the top-left button and move it round to the 12 oclock position using the bottom left/top right buttons. Push the stopper back in. This will let you adjust the clock hand alignment without needing to re-set the time/date/etc
gas path's link is very good but don't forget you can get a full manual in PDF format from:
http://www.citizenwatch.com/uk/techn...nst/index.html
You'll want the C300 manual. - its only 106 KB so is a very quick download.
http://www.citizenwatch.com/uk/techn...nst/index.html
You'll want the C300 manual. - its only 106 KB so is a very quick download.