B727 Runway Performance Program
Thread Starter
Join Date: Sep 1998
Location: Fort Lauderdale, FL USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
B727 Runway Performance Program
Does anyone have a simple program (spreadsheet or otherwise) that can accept input such as TOGW, temp, PA and wind, and provide an estimate of runway length required for a B727-100?
I'm interested in locating something like this for rough planning purposes. I realize that runway slope, obstacle clearance, and second segment climb are not addressed - I'm just interested in answering "yes-no-maybe" type of questions.
The aircraft is a B727-100 with -9A engines.
I'm interested in locating something like this for rough planning purposes. I realize that runway slope, obstacle clearance, and second segment climb are not addressed - I'm just interested in answering "yes-no-maybe" type of questions.
The aircraft is a B727-100 with -9A engines.
Join Date: Sep 1999
Location: ME
Posts: 5,505
Likes: 0
Received 0 Likes
on
0 Posts
It will probably depend on how many B727's you operate and if the engine/airframe combination is readily available.
Try contacting their Flight Operations Engineering people in Tukwila.
There again, if you plan on leaving out slope, obstacles and climb requirements, you could always tabulate the field length limit charts.
Good Luck.
Mutt
Try contacting their Flight Operations Engineering people in Tukwila.
There again, if you plan on leaving out slope, obstacles and climb requirements, you could always tabulate the field length limit charts.
Good Luck.
Mutt