Bump
Thread Starter
Eight Gun Fighter
Joined: Apr 2000
Posts: 1,126
Likes: 0
From: Western Approaches
Bump

It was anxiety at the airport Friday night as two planes collided into each other on the tarmac at Chicago's O'Hare Airport.
A fire official told the Chicago Tribune that the two Delta planes were backing away from gates when they clipped wings.
Delta spokeswoman Chris Kelly Singley confirmed that two planes had 'made contact' as they were getting set for take-off
Last edited by Rollingthunder; 31st July 2011 at 07:38.
Ich bin ein Prooner.

Joined: Feb 2003
Posts: 513
Likes: 0
From: Home of the Full Monty.
As a non-aviation industry individual, can I ask someone in the trade - Is there any kind of control of aircraft movements being carried out by ground handlers, i.e. are the tug drivers/handlers subject to radio clearances from whoever before shunting an aircraft out from the gate?
Ich bin ein Prooner.

Joined: Feb 2003
Posts: 513
Likes: 0
From: Home of the Full Monty.
Thanks for that, BOAC. That being the case, and in no way being critical of anyone, it appears to favour a spot of confusion, as it is often very difficult to see directly behind an aircraft wanting to move from the gate.
Per Ardua ad Astraeus
Joined: Mar 2000
Posts: 18,575
Likes: 4
From: UK
Is is the tug drivers job to avoid collisions. They can see where they are pushing the a/c. If clearance for tugging is relayed from the flight deck, then any 'cautions' such as 'xxx pushing also from Stand 6' will be passed down as well, but the tuggie MUST make sure the area is clear.
Per Ardua ad Astraeus
Joined: Mar 2000
Posts: 18,575
Likes: 4
From: UK
Indeed. It is not clear how it happened, of course, whether the MD was backed onto the wing-tip, whether t'other was 'swung' into the tail or even if the near a/c was taxying off with a turn as the other was pushed. Someone knows (and someone 'pays')! Judging by the quote, "Delta spokeswoman Chris Kelly Singley" is not one of those
Some push-backs use 'wing walkers' who check tip clearance (but not 'tail walkers').

Some push-backs use 'wing walkers' who check tip clearance (but not 'tail walkers').







