PPRUNERS out of the Closet
Bugsmasherdriverandjediknite
Join Date: Jul 2000
Location: Bai, mi go long hap na kisim sampla samting.
Posts: 2,849
Likes: 0
Received 0 Likes
on
0 Posts
Put me down for two and two for Mrs Wiz, also happy to be a distrabution point in west oz.
------------------
I'd rather a bottleinfrontofme than a frontal labotomy
------------------
I'd rather a bottleinfrontofme than a frontal labotomy
Guest
Posts: n/a
I've put up a couple of tentative ideas for the lapel pins at the URL below:
http://www.users.totalise.co.uk/~pwalsh/pprune/
Regards
WxJx
[This message has been edited by PPRuNe Towers (edited 26 August 2000).]
http://www.users.totalise.co.uk/~pwalsh/pprune/
Regards
WxJx
[This message has been edited by PPRuNe Towers (edited 26 August 2000).]
Guest
Posts: n/a
My vote goes for the PPRuNe "Junbo" in Smurf's post!
SeaKing,
Should be no problem to mention the last war - providing there's no PPRuNe members from Iraq !
Awaiting manufacture so I can place my order!!
ESG
------------------
Through hardship to the bars
SeaKing,
Should be no problem to mention the last war - providing there's no PPRuNe members from Iraq !
Awaiting manufacture so I can place my order!!
ESG
------------------
Through hardship to the bars
Guest
Posts: n/a
Put me down for 2 or 3 if they get produced!
I quite like the cartoon Jumbo that was used by StanSted for the name badges at the Ash Bash but, having seen the two designs on WeatherJinx's page, the right-hand 'square' design is very smart!
BTW Capt PPRuNe, one company that I've used in the past for aviation merchandise is Terrane Promotions. They tend to supply a lot of cloth badges, mugs etc for military aircrew and are quite happy to provide a quote based on a design for a product. Their address is (or was last time I contacted them!):
Terrane Promotions
Terrane House
Whisby Way Industrial Estate
Lincoln
LN6 3LQ
01522 697000
Hope this helps!
[This message has been edited by snafu (edited 26 August 2000).]
I quite like the cartoon Jumbo that was used by StanSted for the name badges at the Ash Bash but, having seen the two designs on WeatherJinx's page, the right-hand 'square' design is very smart!
BTW Capt PPRuNe, one company that I've used in the past for aviation merchandise is Terrane Promotions. They tend to supply a lot of cloth badges, mugs etc for military aircrew and are quite happy to provide a quote based on a design for a product. Their address is (or was last time I contacted them!):
Terrane Promotions
Terrane House
Whisby Way Industrial Estate
Lincoln
LN6 3LQ
01522 697000
Hope this helps!
[This message has been edited by snafu (edited 26 August 2000).]
Guest
Posts: n/a
Obviously missed this thread before
As for the logo pin - great I'll have a few.
T-shirts, done that, been there and the t-shirt survived the wash (Ash Bash specials). Already provided samples to some special pruners. Infin, we discussed this - is this idea still a 'go' - let me know.
As for the logo pin - great I'll have a few.
T-shirts, done that, been there and the t-shirt survived the wash (Ash Bash specials). Already provided samples to some special pruners. Infin, we discussed this - is this idea still a 'go' - let me know.
Guest
Posts: n/a
All
Thanks for the comments on my ideas....I am getting a feeling that there should be perhaps 2 pins... a 'smart' one, (I personally prefer the second one I did - the right hand one in the pic), and a variation of the fun cartoon Jumbo (which I like too!).
To save re-inventing the wheel (I'm supposed to be,er, revising for a Human Remains written!), if someone can get a much better quality rendition of the Jumbo to me via my email address, I'll render it into 'tiepin' form...
G'night
WxJx
Thanks for the comments on my ideas....I am getting a feeling that there should be perhaps 2 pins... a 'smart' one, (I personally prefer the second one I did - the right hand one in the pic), and a variation of the fun cartoon Jumbo (which I like too!).
To save re-inventing the wheel (I'm supposed to be,er, revising for a Human Remains written!), if someone can get a much better quality rendition of the Jumbo to me via my email address, I'll render it into 'tiepin' form...
G'night
WxJx
Guest
Posts: n/a
WeatherJinx -
Try to contact Captain PPRuNe for a better one...
I don't think having 2 designs is a good idea IMO. Will it double the delivery/supply work?
In any case WeatherJinx if you ever make a Pin graphic out of that cartoon, will you send it to me? Thanks
Cheers
SmurJet
Try to contact Captain PPRuNe for a better one...
I don't think having 2 designs is a good idea IMO. Will it double the delivery/supply work?
In any case WeatherJinx if you ever make a Pin graphic out of that cartoon, will you send it to me? Thanks
Cheers
SmurJet
Guest
Posts: n/a
Just to chuck in my thoughts....I think a small pin badge is good idea but I think it should be a of such a nature that's it's recognisable by other ppruners but not by the man in the street. The wearer of a badge that actually said "Pprune" on it would probably spend forever explaining to people what it meant!
I second (or third or whatever) the idea of the little jumbo; how about:
PS. I'll take several
I second (or third or whatever) the idea of the little jumbo; how about:
PS. I'll take several
Guest
Posts: n/a
Absolutely Velvet. VS had the PPRuNe logo (above) put on a B747. Its a very good logo and looks good on a T-Shirt. They were gonna be about £10 (£5 to the fund) if memory serves me right.
And V? Would it be possible to have shirts with a collar too - casual wear, golfing, flying and other activities.
Mustn't let that one go either.
[This message has been edited by InFinRetirement (edited 27 August 2000).]
And V? Would it be possible to have shirts with a collar too - casual wear, golfing, flying and other activities.
Mustn't let that one go either.
[This message has been edited by InFinRetirement (edited 27 August 2000).]
Guest
Posts: n/a
I'd like to add two or three polo shirts (t's with collars and pocket) to my order for 3 badges. Also happy to include a donation to the Pprune running costs, etc. I agree that the badge is better if it does not have "Pprune" on it ... for the reasons already mentioned.
I don't see anyone else from PNG posting here, but there are a number of Ppruners around the country. If nobody else wants to volunteer for distribution here, I'll do it!
------------------
Once a king, always a king.
But once a nite's enough!
I don't see anyone else from PNG posting here, but there are a number of Ppruners around the country. If nobody else wants to volunteer for distribution here, I'll do it!
------------------
Once a king, always a king.
But once a nite's enough!