Russian 737 on ILS 263 knots over the fence.
Join Date: Mar 2006
Location: USA
Posts: 2,365
Likes: 0
Received 0 Likes
on
0 Posts
Once I’m flying 2-3 days a week and I’m back up to speed again, I’ll consider a bit of manual flying in the aircraft. Every recency sim I’ve done has included an engine failure after V1 and a single engine landing, I’ve had more asymmetric practice in the last year than anytime since I did the endorsement. I’m perfectly comfortable with the automatics switched off in the sim where there are no consequences if a practice session goes a bit wrong.
At the moment I’m flying very conservatively, early descents, configuring early, fully stabilised by 1500’ and staying out of the monthly safety report will do me.
At the moment I’m flying very conservatively, early descents, configuring early, fully stabilised by 1500’ and staying out of the monthly safety report will do me.
And that's assuming you really mess it up. More likely, if anything, it's a messy approach, and you attribute it to a lack of recent experience. You'll walk away with a bit more confidence and skill. Next time, it'll be better. The last person asked an important question. What if on your 3rd flight back, you have to fly without the automation? What's the outcome then, when you've squandered the first two opportunities to polish your skills?
As Bob Viking said
In my flying world we constantly try to do the hardest thing we can to make the routine things easy. ‘Train hard, fight easy’ is the mantra.
Join Date: Jun 2007
Location: Wanderlust
Posts: 3,283
Likes: 0
Received 0 Likes
on
0 Posts
It's basic. Whether it's Bangalore, SFO or this one, whether the AP is on or off, the ATHR/Auto throttle is on or off, or you follow FD manually or not, on approach speed and flight path has to be monitored by the pilot. Those who don't do this are either badly trained or have become complacent. There was a case in Delhi where pilot was doing an approach at 300kts violating all speed restrictions of below 10000ft. also below 3000ft. when asked three times by the ATC can you make it, he answered in the affirmative and when cleared to land executed a GA almost causing mid air with Aircraft that had taken off. What conclusions can you draw for this insane act?
Last edited by vilas; 17th Feb 2021 at 12:05.
We had a pilot join us a few years ago after being away from flying for 10 years. This didn't present any major problems as he was a good operator and after a few months in the right seat he got back into the left again. All the Captains he was flying with were doing 80+ hours a month so their currency wasn't an issue and he would have been easier than most new first officers to fly with. He was also the only pilot in the company at the time who had been away for such an extended period.
The current situation is unprecedented so we don't know exactly what it will be like last year when hopefully there will be a significant improvement in air travel. Airlines will be faced with a situation where most crews are short of recent experience and will have to appraise them before returning them to duty. Some pilots may be able to get back easily with minimal training, others may need much longer to get back up to speed. The present system of restricting "green" crew from flying together might have to be applied to ensure that a Captain and F/O who have both been out of the flight deck for two years aren't rostered together.
At the moment I'm happy with my sim performance and think I could do the same in the aircraft if I had to but don't feel the need to try until I'm a bit more current.
The current situation is unprecedented so we don't know exactly what it will be like last year when hopefully there will be a significant improvement in air travel. Airlines will be faced with a situation where most crews are short of recent experience and will have to appraise them before returning them to duty. Some pilots may be able to get back easily with minimal training, others may need much longer to get back up to speed. The present system of restricting "green" crew from flying together might have to be applied to ensure that a Captain and F/O who have both been out of the flight deck for two years aren't rostered together.
At the moment I'm happy with my sim performance and think I could do the same in the aircraft if I had to but don't feel the need to try until I'm a bit more current.
Ten years! And it didn't require him to do type rating again? Very strange, which authority permits this?
Join Date: May 2006
Location: UK
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
No I'm not .. been furloughed too long. For 'tonnes' read litres x 1000 . Apologies.
Join Date: Dec 2006
Location: Casablanca
Age: 52
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
IMO COVID and us flying far less than usual should be dealt with as a THREAT and mitigation measures briefed at the briefing stages: SOP adherence, monitoring and assertiveness should be emphasized.
Join Date: Apr 2019
Location: Montreal
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
vilas
That pilots worldwide think automation flies the plane for you. All it does is free up your hands a little and give you back a little brain processing power. But you are still responsible for ensuring the correct flightpath no matter the degree of automation currently engaged, and I will add that that is so for any phase of flight. People are way too relaxed on automatics and way too stressed hand flying. This is why we have so many "this can't be happening to me" moments, so many losses of control, so many crews suddenly dumped into hand flying at the worst possible moment.
I don't think standards and training will ever be where they need to be, so it is only through individual effort that one can achieve excellence or at least build confidence on one's ship. Yes, automation has gotten better, yes it has improved safety, but we must get better as well. There are no excuses. As Smilin_Ed said, any passenger would be most uncomfortable hearing that their crew is uncomfortable flying manually.
That pilots worldwide think automation flies the plane for you. All it does is free up your hands a little and give you back a little brain processing power. But you are still responsible for ensuring the correct flightpath no matter the degree of automation currently engaged, and I will add that that is so for any phase of flight. People are way too relaxed on automatics and way too stressed hand flying. This is why we have so many "this can't be happening to me" moments, so many losses of control, so many crews suddenly dumped into hand flying at the worst possible moment.
I don't think standards and training will ever be where they need to be, so it is only through individual effort that one can achieve excellence or at least build confidence on one's ship. Yes, automation has gotten better, yes it has improved safety, but we must get better as well. There are no excuses. As Smilin_Ed said, any passenger would be most uncomfortable hearing that their crew is uncomfortable flying manually.
Join Date: Jun 2007
Location: Wanderlust
Posts: 3,283
Likes: 0
Received 0 Likes
on
0 Posts
Stuka child
It's all about developing the scan. All parameters of flight need to be periodically monitored and when a deficiency is noticed the related factors need to checked and corrected. Like for speed, check attitude/flight path and thrust adjust what's not correct. Even if you have not flown manually for a while the precision may suffer but not gross violations like the SFO. 31kts below Vapp during a command check is crazy. It's crashes like these that prompt technology to think about more and more automation. Can pilotless flight do anything worse?
It's all about developing the scan. All parameters of flight need to be periodically monitored and when a deficiency is noticed the related factors need to checked and corrected. Like for speed, check attitude/flight path and thrust adjust what's not correct. Even if you have not flown manually for a while the precision may suffer but not gross violations like the SFO. 31kts below Vapp during a command check is crazy. It's crashes like these that prompt technology to think about more and more automation. Can pilotless flight do anything worse?
Join Date: Mar 2006
Location: USA
Posts: 2,365
Likes: 0
Received 0 Likes
on
0 Posts
Much emphasis has been made about SA on this thread. Rightfully so. So now that he/she has identified a problem with the flight path, how is the pilot uncomfortable with hand flying going to fix it? Not everything can by fixed by turning knobs or pushing buttons. We've seen time and time again that a small percentage of crews are unable to fly when the situation requires it, and serviceable aircraft wind up in flames. What's the solution? More FMA callouts? Say "checked" a few extra times? We all have lapses in SA. When the AP drops off unexpectedly and rolls the plane into a 45 degree bank, reading the FMA and trying to figure out the FD is going to leave a pilot perplexed and confused all the way to the crash site.
Join Date: Dec 1998
Location: UK
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Clearly a rushed and high energy approach that should have been thrown away much earlier. Clearly ineffective intervention from P2. Amazing that the speedbrake wasn’t used. The decision to hand fly was a mistake on this occasion as it resulted in workload higher than their capacity. Any experienced operator knows that hitting the glide at 200kts and flap 5 the aircraft will accelerate down the glide. Full speedbrake and probably gear down were required at this point.
Flaps shouldn’t be used for drag and good practice is to only take the next flap setting when within 10kts or so of the min speed for current flap. Asking for flap close to the flap limiting speed is a good warning sign that your approach is going badly.
Some Boeing FDs have a know anomaly subject to a BAB. If a glideslope signal is subject to interference the GS FMA can have a yellow line appear through it and the FDs pitch sharply down. Something I have experienced first hand, and required intervention to disconnect the AP and ignore the FDs until the GS signal restored. Luckily we were visual at the time and were able to continue and stabilise the approach. I wonder if this could have been a contributing factor on this occasion coupled with very poor flight path and every monitoring by both pilots.
Flaps shouldn’t be used for drag and good practice is to only take the next flap setting when within 10kts or so of the min speed for current flap. Asking for flap close to the flap limiting speed is a good warning sign that your approach is going badly.
Some Boeing FDs have a know anomaly subject to a BAB. If a glideslope signal is subject to interference the GS FMA can have a yellow line appear through it and the FDs pitch sharply down. Something I have experienced first hand, and required intervention to disconnect the AP and ignore the FDs until the GS signal restored. Luckily we were visual at the time and were able to continue and stabilise the approach. I wonder if this could have been a contributing factor on this occasion coupled with very poor flight path and every monitoring by both pilots.
Last edited by Propellerhead; 18th Feb 2021 at 06:44.
Join Date: Jun 2007
Location: Wanderlust
Posts: 3,283
Likes: 0
Received 0 Likes
on
0 Posts
When the AP drops off unexpectedly and rolls the plane into a 45 degree bank, reading the FMA and trying to figure out the FD is going to leave a pilot perplexed and confused all the way to the crash site.
Alternate law just keep wings level which you have do in a Boeing all the time.
Last edited by vilas; 18th Feb 2021 at 07:47.
Join Date: Jun 2007
Location: Wanderlust
Posts: 3,283
Likes: 0
Received 0 Likes
on
0 Posts
Stuka childIt's all about developing the scan. All parameters of flight need to be periodically monitored and when a deficiency is noticed the related factors need to checked and corrected. Like for speed, check attitude/flight path and thrust adjust what's not correct. Even if you have not flown manually for a while the precision may suffer but not gross violations like the SFO. 31kts below Vapp during a command check is crazy. It's crashes like these that prompt technology to think about more and more automation. Can pilotless flight do anything worse?
Thread Starter
Join Date: Jun 2000
Location: Australia
Posts: 4,183
Likes: 0
Received 0 Likes
on
0 Posts
required intervention to disconnect the AP and ignore the FDs until the GS signal restored.
Join Date: Mar 2006
Location: USA
Posts: 2,365
Likes: 0
Received 0 Likes
on
0 Posts
That’s the crux of it, isn’t it? Some people can’t “look at the parameters and set them right”. If you can’t do that, you’re getting a front row seat at the crash site.
Join Date: Dec 2006
Location: The No Transgression Zone
Posts: 2,478
Likes: 0
Received 0 Likes
on
0 Posts
I wonder if one rents a little plane like a 172 or a PA28 and does some steep turns and some touch and goes, would it translate to the jet/turboprop? I think it would be a good confidence booster at the very least.
Join Date: Jun 2001
Location: the edge of reason
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
I'm hoping it will not become an industry standard to manually fly when the weather is marginal so that rusty pilots can improve their skills. Practice hand flying by all means but do it on a nice day when you can look out of the window and then relate that view with the internal view, thus reinforcing previously learned skills. This is not being dependent on automation but realising that pilots who are out of practice need to re-establish the relationship they used to have with their skills, why make it so hard for yourself?
Join Date: Mar 2006
Location: USA
Posts: 2,365
Likes: 0
Received 0 Likes
on
0 Posts
I’m not suggesting we do it in marginal weather every day. Start off on a “good” day if necessary, so there’s no apprehension if you need or want to do it on a “bad” day. I’ve come across both scenarios.