Landing area AW169
Thread Starter
Join Date: Dec 2007
Location: ESGG N57º38'58 E012º16'03
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Landing area AW169
Hi people!
I have a life-threatening allergy to wasp stings and live in a fairly remote area on the western Swedish coast, where in an emergency a land ambulance can take up to an hour to get to me.
I could potentially die within half that time.
Having recently had a redundant telegraph pole and associated overhead wire removed from my garden, I'm now wondering about contacting the regional Air Ambulance service to enquire about getting the property registered as a potentially landable site.
The regional Air Ambulance service is operated by an AW169, so my question is - what are the minimum dimensions required for putting an AW169 down safely now there are no obstructions?
Thanks in advance.
I have a life-threatening allergy to wasp stings and live in a fairly remote area on the western Swedish coast, where in an emergency a land ambulance can take up to an hour to get to me.
I could potentially die within half that time.
Having recently had a redundant telegraph pole and associated overhead wire removed from my garden, I'm now wondering about contacting the regional Air Ambulance service to enquire about getting the property registered as a potentially landable site.
The regional Air Ambulance service is operated by an AW169, so my question is - what are the minimum dimensions required for putting an AW169 down safely now there are no obstructions?
Thanks in advance.
Join Date: Dec 2007
Location: the land of redemption
Age: 53
Posts: 250
Likes: 0
Received 8 Likes
on
1 Post
Hi,
Hems site minimums dimensions are normally stated in the Ops manual of the air operator in charge of the Hems service in the country of operations.
Anyways, the minimum dimensions for an Hems site according to Aw169 RFM are 2D, so to say 15x15 meters.
Cheers
Hems site minimums dimensions are normally stated in the Ops manual of the air operator in charge of the Hems service in the country of operations.
Anyways, the minimum dimensions for an Hems site according to Aw169 RFM are 2D, so to say 15x15 meters.
Cheers
