EC120
Join Date: Oct 2004
Location: T.B.A.
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Helitubby
Helitubby,
Speak to Clint Watt (ex Eurocopter?)
Apparently there is a software problem that does give a false "OVER LIMIT DETECTED", especially if a higher than normal (not necessarily an exceedence) Nr is experienced, e.g. during quickstop, auto's etc.
Radio masts and weather as cause I haven't experienced and can't comment on that.
Can tell you that I worked for a utility company in SA that used the EC120 extensively for powerline work, optic fibre stringing on the powerlines and never had any interference with electricity on the EC120 and some of the lines carried 400Kv that we worked on and over.
Speak to Clint Watt (ex Eurocopter?)
Apparently there is a software problem that does give a false "OVER LIMIT DETECTED", especially if a higher than normal (not necessarily an exceedence) Nr is experienced, e.g. during quickstop, auto's etc.
Radio masts and weather as cause I haven't experienced and can't comment on that.
Can tell you that I worked for a utility company in SA that used the EC120 extensively for powerline work, optic fibre stringing on the powerlines and never had any interference with electricity on the EC120 and some of the lines carried 400Kv that we worked on and over.
Join Date: Nov 2004
Location: South Africa
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Alfa Hotel
Been flying EC120 for about 10 months.
Cant say weather has been a big factor either, but will keep looking out for a trend.
Have also heard the software problem before.
Thanks for the replies.
Been flying EC120 for about 10 months.
Cant say weather has been a big factor either, but will keep looking out for a trend.
Have also heard the software problem before.
Thanks for the replies.
airframe oil and fuel filters for the 120
I see there is a requirement for antiicing additive,but is there an airframe mounted filter such as the other companies use to eliminate this requirement?? and anything for a nicad oil filter for the engine also??thanks
Last edited by lamanated; 6th Nov 2004 at 22:31.
Join Date: May 2001
Location: UK
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
whatsarunway
We are just about to have our third FCU fitted within 500 hours!
Any body know of problems with this unit, at £20,000 a time its getting VERY expensive.
3top
thanks for the info on P2/bleed valve.
It would be nice if engineers came forth with all the information regarding maintenance. I don't want their job, Ijust want to know whats going on up there when I'm flying.
Any body know of problems with this unit, at £20,000 a time its getting VERY expensive.
3top
thanks for the info on P2/bleed valve.
It would be nice if engineers came forth with all the information regarding maintenance. I don't want their job, Ijust want to know whats going on up there when I'm flying.
Join Date: Dec 2003
Location: Australia
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Question......Has anyone seen my duals, they went missing out of the Eurocopter hanagar at Bankstown Sydney Australia.
The collective has the landing light switch snapped off, both collective and cyclic are early model with all the switches.
Appericeate any help....as Eurocopter arn't.
The collective has the landing light switch snapped off, both collective and cyclic are early model with all the switches.
Appericeate any help....as Eurocopter arn't.
Join Date: Mar 2003
Location: the hills of halton
Age: 71
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
Eurocopter Canada were working on an airframe fuel filter a few years ago , not sure if it made it to market yet.
http://www.airweb.faa.gov/Regulatory...5?OpenDocument
they have one for the EC130 .
http://www.airweb.faa.gov/Regulatory...5?OpenDocument
they have one for the EC130 .
Join Date: Aug 2004
Location: northeast usa
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
EC-120 Survey
I am looking for EC-120 operators willing to participate in an aircraft model survey for an article I am writing for a major aviation magazine. Survey form will be kept confidential if desired., or you can be quoted by name if you desire. Form has twenty general satisfaction issues, rated by satisfaction level from 0 lowest to 4 highest. Form can be emailed or faxed, in ms word format or adobe .pdf. Topics include:
Hover Performance:
Fuel Economy:
Vibration/ cabin:
Vibration/ cockpit:
Cockpit Visibility:
Instrument Panel Layout:
Controls – Layout:
Noise: External:
Cabin Temp. Control:
Seating comfort:
Ease of Maint.: Overall
Scheduled Maint. Program
Frequency Unsched. Maint
Engine Reliability:
Maintenance Manuals:
Parts Support – helicopter:
Parts Support - engine:
Tech. Support – helicopter:
Tech. Support - engine:
Overall mfg. Support:
Operating cost:
Overall satisfaction:
Contact me if you would like to participate. Thanks!
Hover Performance:
Fuel Economy:
Vibration/ cabin:
Vibration/ cockpit:
Cockpit Visibility:
Instrument Panel Layout:
Controls – Layout:
Noise: External:
Cabin Temp. Control:
Seating comfort:
Ease of Maint.: Overall
Scheduled Maint. Program
Frequency Unsched. Maint
Engine Reliability:
Maintenance Manuals:
Parts Support – helicopter:
Parts Support - engine:
Tech. Support – helicopter:
Tech. Support - engine:
Overall mfg. Support:
Operating cost:
Overall satisfaction:
Contact me if you would like to participate. Thanks!
Guest
Posts: n/a
compliment for EC120, for a change...
Did a short piece to video the other day in the EC120, shooting backwards out of the removed bottom door.
Notwithstanding all the other bewildering design faults of this aircraft, it was very, very good.
Not only did the seats, seat belts, 'bulkhead' door and bottom door come out easily and safely (and put them back in later by myself without a hernia or too many trapped fingers) but the ride was fast, smooth, steady and perfect for the shots of the aerobatic aircraft doing his stuff behind us.
Anybody else tried it for film work ?
Well done EC ! Now just put a proper engine in it !
(Still not a Squirrel though...)
Notwithstanding all the other bewildering design faults of this aircraft, it was very, very good.
Not only did the seats, seat belts, 'bulkhead' door and bottom door come out easily and safely (and put them back in later by myself without a hernia or too many trapped fingers) but the ride was fast, smooth, steady and perfect for the shots of the aerobatic aircraft doing his stuff behind us.
Anybody else tried it for film work ?
Well done EC ! Now just put a proper engine in it !
(Still not a Squirrel though...)
Cool as a moosp
Join Date: Aug 2001
Location: Mostly Hong Kong
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
MR Shaft Drive inspection
Rejoice with me. 
We have just completed SB63-006 - MR Shaft Drive Inspection (yes I know its late, but we only just bought it...) It is clean as a whistle on a 1999 machine with no sign of corrosion.
Anybody had a problem with that SB or was it a couple of isolated incidents? Just curious.
We have just completed SB63-006 - MR Shaft Drive Inspection (yes I know its late, but we only just bought it...) It is clean as a whistle on a 1999 machine with no sign of corrosion.
Anybody had a problem with that SB or was it a couple of isolated incidents? Just curious.
Ensure you have a pre-acceptance flight test performed to ensure it actually meets the advertised performance in terms of quoted OGE performance and cruise speed. If it doesn't, don't accept it. I know someone who bought a B2 Squirrel to relace his B1 and was very disappointed when it didn't meet specs. It went back to Eurocopter, but ultimately, it was never fully sorted out and doesn't cruise as fast as his previous, lower powered machine. J
Join Date: Jan 2005
Location: USA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
http://img.photobucket.com/albums/v225/usacj/N120DJ_TheIsland001.jpg
No sure if the photo worked but here is a photo of a 120 with the Cineflex V14 HiDef on a meeker mount.
No sure if the photo worked but here is a photo of a 120 with the Cineflex V14 HiDef on a meeker mount.
Join Date: Apr 2002
Location: oceanside
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
fyi: have just received EASA certification for our side flir / nightsun mount. to date we have 22 mounts in service most of which are used in law enforcement.
thanks
cal meeker
www.meekeraviation.com
thanks
cal meeker
www.meekeraviation.com
Join Date: Apr 2004
Location: england
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
How Much!!!!!!!!!!!
I decided that It might be quite a good idea to purchase my own EC120 flght manual being as I fly the aircfaft on a regular basis.
Being a foolish R22 pilot up until now, I called up MCAlpine and instead of being quoted the £30.00 I was expecting which is how much my R22 maual cost. The gentleman on the phone explained that If I sent him a cheque for £700.00 then he would send me one
Are they printed in gold leaf ? or is someone just taking the XXXX
I thought that it was down to the pilot to stay current with the aircraft !!!!!!!!
Being a foolish R22 pilot up until now, I called up MCAlpine and instead of being quoted the £30.00 I was expecting which is how much my R22 maual cost. The gentleman on the phone explained that If I sent him a cheque for £700.00 then he would send me one
Are they printed in gold leaf ? or is someone just taking the XXXX
I thought that it was down to the pilot to stay current with the aircraft !!!!!!!!
Join Date: Feb 2002
Location: Just over there....no there.
Age: 61
Posts: 364
Received 0 Likes
on
0 Posts
Not only Eurocopter, a Bell 205 manual cost about $850,-. I know 'cos someone nicked mine out of my cab a couple of years ago. I'm just glad the boss didn't dock my pay for it 
Join Date: Nov 2001
Location: Iceland
Age: 53
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Yeah! It never ends... I was told it was not that expensive to learn to fly helicopters and it would be relatively easy to get a job flying one... but NO now I find out that it is even very expensive to just read about the darn things, let alone flying them!
I've been had!
I've been had!