737ng flight directors
Thread Starter
Join Date: May 2014
Location: egypt
Age: 35
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
737ng flight directors
hello everyone
does anyone knows when exactly the flight director will disappears after takeoff with the switches are turned off ?
and where i can find the information ?
does anyone knows when exactly the flight director will disappears after takeoff with the switches are turned off ?
and where i can find the information ?
Join Date: Jun 2000
Location: last time I looked I was still here.
Posts: 4,507
Likes: 0
Received 0 Likes
on
0 Posts
It might be a customer option, but will they show at all if off? If they do show when TOGA is selected then each channel will disappear when a roll or pitch channel is selected that is not TOGA.
Mistrust in Management
Quite right Denti,
Though I never chose the TOGA option and preferred to flick two little switches on instead.
Always a bit of a shock to the 200 hour F/O to be faced with a blank ADI and no guidance. Good inadvertent training - and they all coped with it well.
Though I never chose the TOGA option and preferred to flick two little switches on instead.
Always a bit of a shock to the 200 hour F/O to be faced with a blank ADI and no guidance. Good inadvertent training - and they all coped with it well.
Join Date: Jun 2000
Location: last time I looked I was still here.
Posts: 4,507
Likes: 0
Received 0 Likes
on
0 Posts
AS has been said, with switches off the FD's will not show until TOGA is pressed twice airborne. When either mode is changed from TOGA that respective FD bar will disappear; same as on GA with switches off.
Changes will be LNAV/HDG SEL & VNAV/LVL CGH/V/S.
Changes will be LNAV/HDG SEL & VNAV/LVL CGH/V/S.
and add to it if A/T is still in THR HLD. That is a double WTF moment as you approach warp factor.............
