Officially entering the hold
Thread Starter
Join Date: Feb 2013
Location: Cloud cuckoo land
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Officially entering the hold
When do you report to ATC that you've entered the hold ?
When you first pass over the 'beacon' to commence the join, or first time over the 'beacon' on the inbound track after the initial join is completed ?
When you first pass over the 'beacon' to commence the join, or first time over the 'beacon' on the inbound track after the initial join is completed ?
Join Date: Oct 2000
Location: Berkshire, UK
Age: 79
Posts: 8,268
Likes: 0
Received 0 Likes
on
0 Posts
I'd have thought the former but, hey, I was just an ATCO. In a radar environment it hardly matters as the controllers will see you enter the hold and they will note the first time you cross the fix..
HD,
As a lowly PPL with a (now lapsed ) Canadian SE IR, I vividly remember reporting "Entering the hold" at the first beacon passage, during my training.
As a lowly PPL with a (now lapsed ) Canadian SE IR, I vividly remember reporting "Entering the hold" at the first beacon passage, during my training.
Join Date: Jan 2006
Location: Between a rock and a hard place
Posts: 1,267
Likes: 0
Received 0 Likes
on
0 Posts
Second passage over the beacon, if ATC asks me to report established in XX hold.
Entering the hold, not sure about that term and what it means really.
Entering the hold, not sure about that term and what it means really.
Join Date: Oct 2012
Location: UK
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
"Cleared to enter the ABC Hold at xxxx'. Report Entering the Hold"
Requires you to report first time over the Beacon.
The fact that the first pattern flown may not necessarily be the classic racetrack is irrelevant - you have entered the hold.
Requires you to report first time over the Beacon.
The fact that the first pattern flown may not necessarily be the classic racetrack is irrelevant - you have entered the hold.
During my IR I was taught to report 'entering the hold' first time over the beacon, and 'established in the hold' once in the racetrack, if so requested. Seems to have worked so far.
Thread Starter
Join Date: Feb 2013
Location: Cloud cuckoo land
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Maybe there's a wording issue
Entering = first time over fix ( I previously said beacon, but you might be on a gps wpt or if you're really unlucky a vor/vor radial cut)
Established = first time over fix on the inbound track
But what would you report if your inbound trk is 180 deg and your join heading was 190 deg?
Entering = first time over fix ( I previously said beacon, but you might be on a gps wpt or if you're really unlucky a vor/vor radial cut)
Established = first time over fix on the inbound track
But what would you report if your inbound trk is 180 deg and your join heading was 190 deg?
Join Date: May 2001
Location: England
Posts: 1,904
Likes: 0
Received 0 Likes
on
0 Posts
LA, if on the inbound in any case you are on a DIRECT join, i.e. there is no PROCEDURE required to get you established into the hold. Thus, the first time you pass over the beacon you are "entering the hold". If on a parallel or teardrop one would obviously delay the message and "entering the hold" is the only phrase I can recall ever being used.
Well truth is during IR training it was the same bleeding NDB we practiced with so only a couple of different situations ever came about. Since I've been flying slightly bigger metal commercially, I've only entered the hold 3 times in about 4 years! all occasions they were direct joins. My experience with holds is limited so I could be wrong.
Well truth is during IR training it was the same bleeding NDB we practiced with so only a couple of different situations ever came about. Since I've been flying slightly bigger metal commercially, I've only entered the hold 3 times in about 4 years! all occasions they were direct joins. My experience with holds is limited so I could be wrong.
Join Date: Sep 2005
Location: ???
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
The fact that the first pattern flown may not necessarily be the classic racetrack is irrelevant - you have entered the hold.
Why would the type of entry be relevant to ATC? You would be separated Vertically anyway. They want to know that you have commenced holding. They don't care about your position in the hold
Join Date: Jan 2014
Location: glendale
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
superpilot is right
really I should say: correct
Cherokee 1234 holding bozo VOR at 5000. Entered holding at 21 EFC 27
I think originally the idea of being inbound to the fix became important because that was really the ONLY time you had precise navigation (back in the days of VOR/ADF).
IF you crossed the fix outbound before going inbound you were guessing about the wind etc. ONce inbound on the holding course you had positive nav, as opposed to just flying a heading and hoping for the best. You still had to compensate for winds to adjust your inbound leg to 1 min (or other)
Holding clearances and understanding and holding side etc all came about because OF DEATHS DUE TO MISUNDERSTANDING.
I still recall the man who examined me for my US Instrument rating drilling me endlessly about holding. WHY? His best friend entered holding near Salt Lake City, Utah, USA with an incorrect holding clearance and slammed into the Wasatch mountains killing all aboard.
Back in the good old days, we would report holding, and on approach, Outer Marker outbound, procedure turn OUTBOUND, procedure turn INbound, Outermarker inbound .
A man named Taylor wrote a great book a very long time ago called: INSTRUMENT FLYING. I encourage you to all read it. It is the "Stick and Rudder" of instrument flying.
I have poorly paraphrased him here. Good luck.
And remember, ATC is not a flight instructor and they screw up.
I once got a holding clearance from a controller near Modesto, CA, USA. The format was wrong and I called him on it a number of times and finally told him we were unable to comply with his holding clearance and demanded that he clarify the clearance (this was shortly after the controller's strike). He gave up and just vectored me for delays.I called him on the land line and told him how he had screwed up the clearance.
There is another thread here about why a direction is included in a holding clearance, it is important that we understand why we do it this way and the friend who crashed into the mountains is why!
Hold south of Bozo VOR on the 182 radial, right turns, 1 minute legs, EFC (the most important part) at 37, time now 18.
really I should say: correct
Cherokee 1234 holding bozo VOR at 5000. Entered holding at 21 EFC 27
I think originally the idea of being inbound to the fix became important because that was really the ONLY time you had precise navigation (back in the days of VOR/ADF).
IF you crossed the fix outbound before going inbound you were guessing about the wind etc. ONce inbound on the holding course you had positive nav, as opposed to just flying a heading and hoping for the best. You still had to compensate for winds to adjust your inbound leg to 1 min (or other)
Holding clearances and understanding and holding side etc all came about because OF DEATHS DUE TO MISUNDERSTANDING.
I still recall the man who examined me for my US Instrument rating drilling me endlessly about holding. WHY? His best friend entered holding near Salt Lake City, Utah, USA with an incorrect holding clearance and slammed into the Wasatch mountains killing all aboard.
Back in the good old days, we would report holding, and on approach, Outer Marker outbound, procedure turn OUTBOUND, procedure turn INbound, Outermarker inbound .
A man named Taylor wrote a great book a very long time ago called: INSTRUMENT FLYING. I encourage you to all read it. It is the "Stick and Rudder" of instrument flying.
I have poorly paraphrased him here. Good luck.
And remember, ATC is not a flight instructor and they screw up.
I once got a holding clearance from a controller near Modesto, CA, USA. The format was wrong and I called him on it a number of times and finally told him we were unable to comply with his holding clearance and demanded that he clarify the clearance (this was shortly after the controller's strike). He gave up and just vectored me for delays.I called him on the land line and told him how he had screwed up the clearance.
There is another thread here about why a direction is included in a holding clearance, it is important that we understand why we do it this way and the friend who crashed into the mountains is why!
Hold south of Bozo VOR on the 182 radial, right turns, 1 minute legs, EFC (the most important part) at 37, time now 18.
Join Date: Jan 2006
Location: Between a rock and a hard place
Posts: 1,267
Likes: 0
Received 0 Likes
on
0 Posts
There is another thread here about why a direction is included in a holding clearance, it is important that we understand why we do it this way and the friend who crashed into the mountains is why!
Hold south of Bozo VOR on the 182 radial, right turns, 1 minute legs
Hold south of Bozo VOR on the 182 radial, right turns, 1 minute legs
In my airline we have an E.F. escape route that takes you to the VOR to pick up the hold "325 inbound, LT" - that's all it says. The way I read it first time was to hold on the 325 radial. My colleague read it as holding on the 145 radial with a 325 inbound track.
Whoever is right or wrong, not sure (probably him).. but the instruction is obviously not clear enough if we read it differently.
Join Date: Oct 2000
Location: Berkshire, UK
Age: 79
Posts: 8,268
Likes: 0
Received 0 Likes
on
0 Posts
<<Why would the type of entry be relevant to ATC? You would be separated Vertically anyway. They want to know that you have commenced holding. They don't care about your position in the hold>>
Really...? Is that so? Guess you don't fly in busy airspace. Holds don't only separate you vertically from other traffic. In busy airspace traffic at the same level has to be considered too.
Really...? Is that so? Guess you don't fly in busy airspace. Holds don't only separate you vertically from other traffic. In busy airspace traffic at the same level has to be considered too.
Join Date: Jan 2014
Location: glendale
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Heathrow Director is correct.
There is a holding side, a non holding side (protected side and non protected side) for a reason.
Sometimes that reason, for a non protected side, is air traffic.
Sometimes it is because there is a mountain.
I have a feeling, the children of the magenta line , really are like little monkeys , pull the handle and get the pellet. And they really haven't read up on the subject.
Visualization of holding patterns using either a paper chart or a directional gyro is actually an art and surely weeded many pilots out of the profession.
There is a holding side, a non holding side (protected side and non protected side) for a reason.
Sometimes that reason, for a non protected side, is air traffic.
Sometimes it is because there is a mountain.
I have a feeling, the children of the magenta line , really are like little monkeys , pull the handle and get the pellet. And they really haven't read up on the subject.
Visualization of holding patterns using either a paper chart or a directional gyro is actually an art and surely weeded many pilots out of the profession.
Per Ardua ad Astraeus
Join Date: Mar 2000
Location: UK
Posts: 18,579
Likes: 0
Received 0 Likes
on
0 Posts
And they really haven't read up on the subject.
Join Date: Oct 2012
Location: UK
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
- don't forget in the education process to make sure they know that the 'non-holding' side is also 'protected' out to a certain distance to enable joins?
Holds don't only separate you vertically from other traffic. In busy airspace traffic at the same level has to be considered too.
ATC would like to know that you have remembered that you are to Hold (stay within a certain area) and are not going to fly on miles and miles outbound from the Fix.
Therefore 'Entering the Hold' should be reported the first time over the Fix.
Last edited by Level Attitude; 12th Dec 2014 at 09:10.