kingair NO-LIGHT?
Thread Starter
Join Date: Feb 2012
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
kingair NO-LIGHT?
hey guys...alright...i was reading this on the internet King Air starting malfuntions | Jetcareers i dont understand number 3...the NO-LIGHT.as you can see one of the members quoted a question and the answer was "KABOOM"..why would this be as i thought that when starting a kingair,you flip the starter/ignition switch,stabilize 12% N1 and introduce fuel to low idle....once again i ask,what do they mean by NO LIGHT..surely you ONLY get A LIGHT once you have introduced fuel??
regards
regards
Join Date: Jul 2007
Location: somewhere
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
NO LIGHT means that the 1st set of nozzles (7) fails to deliver fuel into the burner-can for whatever reason or the igniters are not working. Either cases you close the condition lever to stop fuel flowing (if it's the igniter that has failed) and purge the engine using the remaining "motoring-time".
The starter has its limitations:
60 sec ON/40 sec OFF, 60 sec ON/40 sec OFF, 60 sec ON/30 min OFF
So if after 15 sec you are positive after a NO LIGHT you close the CONDITION LEVER and leave the STARTER ONLY engaged for the remaining 45 sec. Then as above before attempting another start...
Does it help?
DK
The starter has its limitations:
60 sec ON/40 sec OFF, 60 sec ON/40 sec OFF, 60 sec ON/30 min OFF
So if after 15 sec you are positive after a NO LIGHT you close the CONDITION LEVER and leave the STARTER ONLY engaged for the remaining 45 sec. Then as above before attempting another start...
Does it help?
DK
Thread Starter
Join Date: Feb 2012
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
hey DK....you have helped me quite abit...uhhmm what im confused about is that when you stabilize at 12%,and introduce fuel....is that when you will know that you have got a NO LIGHT when the engines dont start?
Join Date: Jul 2007
Location: somewhere
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
It doesn't have to be 12% sharp.We sometimes wait for a 14-15% i.e. if it was a quick turn-around (15 mins or less). A friend of mine that flies C208 in Kenya told me that mid-afternoon (when it's roasting...) they give their PT6 a good 20+ sec of dry-motoring to get "fresh" air in before putting the fuel on. They probably reach a 18-20% by then...
So yes, you won't know whether you had a NO-LIGHT until you move the condition lever to LOW-IDLE and you can see FUEL FLOW increasing but no ITT rise.
Nite
DK
So yes, you won't know whether you had a NO-LIGHT until you move the condition lever to LOW-IDLE and you can see FUEL FLOW increasing but no ITT rise.
Nite
DK