Go Back  PPRuNe Forums > Non-Airline Forums > Private Flying
Reload this Page >

Wings make odd noise…

Wikiposts
Search
Private Flying LAA/BMAA/BGA/BPA The sheer pleasure of flight.

Wings make odd noise…

Thread Tools
 
Search this Thread
 
Old 15th Jul 2002, 14:27
  #1 (permalink)  
Thread Starter
 
Join Date: Mar 2002
Location: Switzerland
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Wings make odd noise…

I recently read in an article of an older german magazine, that during pre-flight inspection, as part of the wings check, when rocking them up and down holding them at the wing-tips, no “cracking” noise should be heard. If “cracking” is heard, flying would be a very bad idea instead, wings assembly should be thoroughly checked.

Now to my question: as a co-owner of a lovely Pilatus P3 I always hear this odd “cracking” when rocking the wings up and down, especially if during the previous flight aerobatics were performed.
I never thought this could be a problem, till I stumbled across that article, as I assumed that under the stress of aerobatics the wing would slightly flex and the skin with it…..it would then make a “cracking” noise where the aluminium sheets are riveted together, when some sort of tension was released by rocking the wing. In fact, this odd noise is to be heard only once. Repeated rocking of the wings will not result in repeated hearing of the odd “cracking”.

What do you think I should do guys ?? Have you ever experienced something similar ?

Cheers

SlowRoll
SlowRoll is offline  
Old 16th Jul 2002, 04:05
  #2 (permalink)  
 
Join Date: Aug 2000
Location: Just South of the last ice sheet
Posts: 2,681
Received 8 Likes on 3 Posts
As it is now lodged in your mind and may impair your enjoyment of the P3 (lucky chap) maybe it would be worthwhile demonstrating the 'cracking sound' to an engineer experienced on the type. Hopefully he will be able to put your mind at rest without emptying your bank account

As an afterthought, how old was this article? Were they referring to aircraft with wooden main spars or was it a general statement covering all aircraft construction methods?

I waggle the wings before I fly just to make sure they're screwed on. I get some creaks but no clunks. Clunks mean something lose and pushing the bird back into the hangar!!!!
LowNSlow is offline  
Old 16th Jul 2002, 11:14
  #3 (permalink)  
Thread Starter
 
Join Date: Mar 2002
Location: Switzerland
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Thanks for your reply LowNSlow!

The magazine is 3 to 4 years old and the article was about things to watch out for when hiring an aircraft. It was not particularly related to aircraft with wooden main spar.

The next time I have the chance, I will get an engineer with experience on type to look at the "problem".

Cheers

SlowRoll
SlowRoll is offline  
Old 16th Jul 2002, 20:18
  #4 (permalink)  
 
Join Date: Sep 2001
Location: the north
Posts: 253
Likes: 0
Received 0 Likes on 0 Posts
I used to waggle the wings of an old biplane I used to fly because an old engineer once told me to make sure the wave/flexing continued to the fuselage and even to the other tip. Seems if the spar (wood) were cracked the ripple would stop.

Well I was never too sure of the logic but I always did it so I feel confident that I never flew with a cracked spar !!!

Wonder what other funny/odd/strange habits we develop prior to flight ?
bingoboy is offline  
Old 17th Jul 2002, 16:03
  #5 (permalink)  

Avoid imitations
 
Join Date: Nov 2000
Location: Wandering the FIR and cyberspace often at highly unsociable times
Posts: 14,588
Received 445 Likes on 236 Posts
Before losing too much sleep, hold out your arms and carry out a similar movement without actually holding the wing.

If you can still hear the cracking noise, the aircraft is OK and a visit to the chiropractor might cure it altogether.
ShyTorque is offline  
Old 18th Jul 2002, 04:06
  #6 (permalink)  
 
Join Date: Aug 2000
Location: Just South of the last ice sheet
Posts: 2,681
Received 8 Likes on 3 Posts
bingoboy my dad used to pee on the tailwheel of his Halifax. Don't recommend it nowadays though, the PC Police would have you locked up before you could pull up the zip at most airfields :
LowNSlow is offline  
Old 18th Jul 2002, 14:34
  #7 (permalink)  
 
Join Date: Mar 2001
Location: England
Posts: 187
Likes: 0
Received 0 Likes on 0 Posts
With reference to Bingoboys reply:

I remember many moons ago being told be a quite well known glider repairer that if you held one wing tip and gently wiggled it up and down the other tip should do exactly the same at the same frequency. If it didnt then there was a major crack in the spar. This worked for glass fibre and wooden spars - don't know about metal ones.
Reichman is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.